Operating instructions

Others
136
VQT1G66
CANNOT FINALIZE.
The disc cannot be finalized (un-finalized) on this unit. (The disc
was recorded on another device etc.)
Or, you are trying to finalize a disc that has no motion pictures
recorded on it.
CANNOT READ DISC.
PLEASE CHECK
CONDITION OF DISC.
There are scratches or dirt on the recording/playback side of the
disc. If there is dirt on the disc, use a soft cloth to wipe it. (l 25) If
the disc is scratched, insert a new one.
CHECK CARD. This card is not compatible or it cannot be recognised by the unit.
THIS CARD CANNOT
RECORD IN VIDEO MODE.
An 8 MB or 16 MB SD card on which motion pictures cannot be
recorded is inserted.
CARD LOCKED. The write protection switch on the SD card is set to LOCK. (l 24)
NOW ACCESSING.
PLEASE DO NOT REMOVE
CARD.
The data is being processed. Close the card slot cover and wait for
a while.
CARD FULL.
The SD card is full so no further data can be recorded. Delete
unnecessary files (l 85, 90) or insert a new SD card.
CANNOT OPERATE THIS
FUNCTION IN THIS MODE.
PRE-REC cannot be set in disc recording mode.
Or, you are trying to copy a disc in STD playback mode.
TOP MENU COULD NOT
BE CREATED.
Creating a top menu has failed.
There may be scratches or dirt on the recording/playback side of the
disc. If there is dirt on the disc, use a soft cloth to wipe it. (l 25)
CANNOT DIVIDE. THE
NUMBER OF SCENES IS
FULL.
The disc or SD card is full or the number of scenes has reached the
maximum limit so no further data can be divided. Delete
unnecessary scenes (l 85).
CANNOT OPERATE.
INTERNAL TEMPERATURE
IS TOO HIGH.
The temperature of the unit is high so it cannot be operated. Turn off
the power, wait until the unit cools and then turn on the power again.
INTERNAL TEMPERATURE
TOO HIGH. PLEASE TURN
UNIT OFF AND WAIT A
WHILE.
THIS BATTERY CANNOT
BE USED.
Use a battery that you can use for this unit. (l 28)
You are attempting to connect an AC adaptor not compatible with
this unit. Use the supplied AC adaptor. (l 31)
If using a Panasonic battery compatible with this unit (l 28), eject
the battery and then insert it again. If the message appears even
after repeating this several times, this unit needs repair. Detach the
power and consult the dealer who you purchased this unit from. Do
not attempt to repair it by yourself.
CANNOT RECORD IN AGS
MODE.
The AGS function is activated. (l 50)
HDC-SX5-VQT1G66_mst.book 136 ページ ２００７年７月２４日 火曜日 午後５時５６分