Operating instructions

15
VQT1G66
Before using
41 Disc compartment (l 35)
42 Grip belt (l 15)
43 Outlet
Adjust the belt length so it fits your hand.
Adjust the belt length and the pad
position.
1 Flip the belt.
2 Adjust the length.
3 Replace the belt.
Rotate the lens hood
counter-clockwise A to remove it. In
order to attach it, place into slot B,
and then rotate it clockwise C.
≥ Attach the MC protector or the ND filter of the
Filter Kit (VW-LF37WE; optional) in front of the
lens hood. Do not attach the other accessories
on the hood. (Except for the lens cap)
(Refer to the operating instructions for the
Filter Kit.)
≥ When fitting the tele conversion lens
(VW-T3714H; optional) or the wide conversion
lens (VW-W3707H; optional), first remove the
lens hood.
(Refer to the operating instructions for the tele
conversion lens or the wide conversion lens.)
(Be careful about the following.)
When 2 lens accessories, such as the ND filter
and tele conversion lens, are fitted and the zoom
lever is pressed toward the W side, the 4 corners
of an image will be darkened. (Vignetting)
(When fitting 2 lens accessories, first remove the
lens hood and then fit them.)
Using grip belt
43
41
42
Lens hood
HDC-SX5-VQT1G66_mst.book 15 ページ ２００７年７月２４日 火曜日 午後５時５６分