Operating instructions

16
VQT1G66
Before using
Attach the lens cap to protect the surface of the
lens.
≥ When the MC protector or the ND filter of the
Filter Kit (VW-LF37WE; optional) is attached to
the front of the lens hood, use the lens cap
included in the Filter Kit.
1 Pass the end of the lens cap cord
through the belt.
2 Pass the lens cap through the
loop.
3 To attach or remove the lens cap,
hold both sides of the lens cap
with the tips of your finger and
thumb.
You can mount an optional microphone, light etc.
≥ When using an accessory for the smart
accessory shoe, the power is supplied from
this product.
Connect to the smart accessory
shoe.
If using an accessory for the smart accessory
shoe, be sure to use the following.
jStereo zoom microphone (VW-VMH3E;
optional)
jVideo DC light (VW-LDH3E; optional)
jVideo flash (VW-FLH3E; optional)
≥ Mounting an accessory for the smart
accessory shoe other than the above may
cause the unit to malfunction.
≥ When the AC adaptor or the battery pack
(VW-VBG130; optional) is used, you cannot
use the video DC light.
This is a hole for attaching the unit to the optional
tripod.
(Please carefully read the operating instructions
for how to attach the unit to the tripod.)
≥
When a tripod is used, you can perform operations
easily using the remote control. (
l 17)
Attaching the lens cap
(Included in the Filter Kit
(VW-LF37WE; optional))
Smart accessory shoe
Tripod receptacle
HDC-SX5-VQT1G66_mst.book 16 ページ ２００７年７月２４日 火曜日 午後５時５６分