Operating instructions

35
VQT1G66
Setup
Inserting/removing a disc
When inserting or removing the disc, fit the
charged battery pack or connect the AC adaptor
to the unit. The cover of the disc compartment
will not open unless the unit is powered.
1 Attach the battery or connect the
AC adaptor.
2 Slide the DISC EJECT lever once
and release it.
A few moments after the ACCESS/PC lamp A
blinks, the cover of the disc compartment will
open slightly.
3 Open the cover of the disc
compartment by hand and insert/
remove the disc.
Inserting disc
Fit the disc onto the spindle in the centre.
A Recording/playback side
B Pickup lens
C Press until it clicks.
≥ Be careful not to touch the recording/playback
side of the disc when inserting/removing it.
DISC
EJECT
ACCESS
/PC
HDC-SX5-VQT1G66_mst.book 35 ページ ２００７年７月２４日 火曜日 午後５時５６分