Operating instructions

61
VQT1G66
Recording
You can record yourself while viewing the LCD
monitor. You can record persons in front of the
unit while showing them the image.
¬Rotate the mode dial to select or
.
Rotate the LCD monitor towards the
lens side.
The image is horizontally flipped as if you see a
mirror image. (However the image recorded is
the same as a normal recording.)
Extend the viewfinder to see the picture while
recording.
When the LCD monitor is rotated towards the
lens side, the icon will not be displayed even if
you press the cursor button.
Only some indications will appear on the
screen. When [°] appears, return the
direction of the LCD monitor to normal position
and check the warning/alarm indication.
(l 135)
Use this function to brighten parts that are in the
shadow and difficult to see and to stop white
saturation in bright parts.
¬Rotate the mode dial to select or
.
1 Press the cursor button. Then
move the cursor button down to
display the icon shown in the
illustration.
2 Move the cursor button up to
select [ ].
To cancel intelligent contrast control
Select [ ] again.
If there are extremely dark or bright parts or the
brightness is insufficient, the effect may not be
clear.
If you turn off the power or operate the mode
dial, the intelligent contrast control is cancelled.
Recording yourself
RAM
HD
HD
HD
HD
-RW
HD
HD
-R
HD
HD
-R
DL
VIDEO
PHOTO
RAM
-RW(VR)
-RW(V)
-R
-R
DL
Intelligent contrast control
This is for recording both bright and
dark parts clearly at the same time.
RAM
HD
HD
HD
HD
-RW
HD
HD
-R
HD
HD
-R
DL
VIDEO
PHOTO
HDC-SX5-VQT1G66_mst.book 61 ページ 2007年7月24日 火曜日 午後5時56