Operating instructions

67
VQT1G66
Recording
Reduces the phenomena where human eyes
become red from flashes.
Press the MENU button, then select
[PICTURE]
# [RED EYE] # [ON] and
press the cursor button.
To cancel the red eye reduction function
Press the MENU button, then select [PICTURE]
# [RED EYE] # [OFF] and press the cursor
button.
≥ The flash is activated 2 times. Do not move
until the second flash is finished.
≥ Use this when you take pictures of people in
dark places.
≥ Red eye phenomenon may appear depending
on the recording conditions.
Press the MENU button, then select
[PICTURE]
> [FLASH LEVEL] >
desired item and press the cursor
button.
[ßj]: If the brightness is too high.
[ßd0]: In normal recording
[ßi]: If the brightness is insufficient.
ª Using the flash VW-FLH3E
(optional)
≥ The flash permits still picture recording in a
dark place 2.5 m or more distant from the
subject. The available range of the flash is
approx. 1 m to 4 m.
≥ The [ß] or [ßA] indication appears only when
the PHOTO SHOT button is pressed halfway.
≥ The flash setting cannot be changed when the
power switch on the flash is set to [ON] or
[AUTO].
≥ The optional flash and the built-in flash cannot
be used simultaneously.
≥ The brightness of the flash cannot be adjusted.
≥ The shutter speed, iris/gain, and white balance
become fixed.
≥ Using the flash outdoors or with backlight or
other bright conditions may result in white
blotches (colour blotches) on the pictures. If
so, either adjust the iris manually or use the
backlight compensation function, without using
the flash.
≥ Carefully read the operating instructions for the
flash.
Red eye reduction function To adjust the brightness of the
flash
MENU
HDC-SX5-VQT1G66_mst.book 67 ページ ２００７年７月２４日 火曜日 午後５時５６分