Operating instructions

77
VQT1G66
Recording
3 Move the cursor button left or
right to make the adjustment.
A Shutter speed:
HD mode:
1/25 to 1/8000
STD mode:
1/50 to 1/8000
The shutter speed closer to 1/8000 is faster.
(HD mode) If [AUTO SLOW SHTR] is set to
[OFF], then the shutter speed will be set
between 1/50 and 1/8000.
B Iris/Gain value:
CLOSE # (F16 to F2.0) # OPEN # (0dB to
18dB)
Value closer to [CLOSE] darken the image.
Value closer to [18dB] brighten the image.
When the iris value is adjusted to brighter than
[OPEN], it changes to the gain value.
To restore to automatic adjustment
Set the AUTO/MANUAL/FOCUS switch to
AUTO.
When setting both the shutter speed and the
iris/gain value, set the shutter speed and then
set the iris/gain value.
Manual shutter speed adjustment
Avoid recording under fluorescent light,
mercury light or sodium light because the
colour and brightness of the playback image
may change.
If you increase the shutter speed manually, the
gain value will increase automatically
depending on how much the sensitivity lowers
and the noise on the screen may increase.
You may see vertical lines of light in the
playback image of a brightly shining subject or
highly reflective subject, but this is not a
malfunction.
During normal playback, image movement
may not look smooth.
When recording in an extremely bright place,
the screen may change colour or flicker. If so
adjust the shutter speed manually to [1/50] or
[1/100].
Manual iris/gain adjustment
If the gain value is increased, the noise on the
screen increases.
Depending on the zoom magnification, there
are iris values that are not displayed.
HDC-SX5-VQT1G66_mst.book 77 ページ 2007年7月24日 火曜日 午後5時56