Operating instructions

87
VQT1G66
Editing
3 When you reach the area where
you want to divide the scene,
press the cursor button down to
set the dividing point.
≥ Using slow-motion playback or frame-by-frame
playback makes it easy to search for the point
where you want to divide the scene. (l 81)
4 When the confirmation message
appears, select [YES], then press
the cursor button.
5 Delete the unnecessary scenes.
≥ Refer to P85 for deleting scenes.
To continue dividing other scenes
Repeat steps 2-4.
To complete editing
Press the MENU button.
(HD mode only)
To delete all the divided points
Press the MENU button, then select [EDIT
SCENE] # [DIVIDE] # [CANCEL ALL] and
press the cursor button.
≥ When the confirmation message appears,
select [YES], then press the cursor button.
≥ All divided points set on this unit will be
cancelled.
≥ The scenes that were deleted after division
cannot be recovered.
≥ Scenes cannot be divided if the number of
scenes has reached 999.
≥ When the amount of time recorded on the
scene is too short, dividing may not be
possible.
≥ If images that have been divided are played
back on another device, the points where the
scenes join may not be clear.
≥ Data that has been recorded on another device
cannot be divided.
≥ When [CANCEL ALL] is selected, the divided
points of all scenes are deleted and the unit
turns back to the setting that plays back all
scenes even if you selected to play back the
scenes by date.
≥ Data that has been recorded or edited on
another device cannot be divided and the
divided points cannot be deleted.
≥ Discs other than DVD-RAM cannot be divided
or deleted and the divided points cannot be
deleted when the remaining space on the disc
becomes small.
HDC-SX5-VQT1G66_mst.book 87 ページ ２００７年７月２４日 火曜日 午後５時５６分