Operating Instructions

65
VQT2N56
You can record bright pictures even in dark places by slowing the shutter speed.
≥ Change the mode to .
≥ Switch to manual mode. (l 75)
≥ The shutter speed is set to 1/25 or more depending on the surrounding brightness.
≥ This function cannot be used in still picture recording mode.
≥ When the shutter speed becomes 1/25, the screen may be seen as if frames are missed
and afterimages may appear.
Recording motion pictures with more vivid colours, using x.v.Colour
™
technology.
≥ Change the mode to .
≥ Switch to manual mode. (l 75)
≥
For more realistic colours, use an HDMI mini cable with a TV that supports the x.v.Colour
™
.
≥ This function cannot be used when switch to Intelligent auto mode.
≥ When motion pictures recorded while this function is turned [ON] are played back
with a TV not compatible with x.v.Colour
™
, colours may not be reproduced properly.
≥ To play back images recorded in the digital cinema colour with vivid colours of wider colour
ranges, a device compatible with x.v.Colour
™
is required. When these images are played
back with devices other than ones compatible with x.v.Colour
™
, it is recommended to
record the images after this function is turned [OFF].
≥ x.v.Colour
™
is a name for devices that are compatible with the xvYCC format, an
international standard for expanded colour in motion pictures, and that follow the rules for
signal transmission.
Message is displayed when this unit is moved rapidly.
≥ Change the mode to .
When “CAMERA PANNING IS TOO FAST.” appears, move the unit slowly while recording.
≥ Message will not appear while pausing the recording. (Message will appear even if it is
pausing the recording if [DEMO MODE] is set to [ON].)
≥ In some recording conditions, messages may not appear.
[AUTO SLOW SHTR]
: [RECORD SETUP] # [AUTO SLOW SHTR] # [ON]
[Digital Cinema Colour]
: [RECORD SETUP] # [Digital Cinema Colour] # [ON]
[SHOOTING GUIDE]
: [RECORD SETUP] # [SHOOTING GUIDE] # [ON]