Datasheet

ManualsBrandsPanasonic ManualsIndustrial RelaysIndustrial Relay HE, 1NO, 30A, Quick Connect Terminal

ds_61C06_en_he: 100811D

CLASSIFICATION

PRE-TENSION AND KICK-OFF MECHANISM

TV-15, 30 AMP (1 Form A)

Power Relay

HE RELAYS

Type PC board Plug-in TM Screw terminal

Operating funciton Single side stable

Contact arrangement 1 Form A 1 Form A 2 Form A 1 Form A 2 Form A 1 Form A 2 Form A

VDE

1 Form A Plug-in type

Form A type also available with

48A contact capacity

Refer to data sheet, starting on page 9.

FEATURES

1. Excellent resistance to contact

welding

Owing to the pre-tension and kick-off

mechanism, the 1 Form A passes TV-15

and the 2 Form A passes TV-10.

2. High-capacity and long life

3. Excellent surge resistance

Between contacts and coil, the surge

voltage is more than 10,000 V

(when surge waveform accords with

JEC-212-1981).

4. Compatible with all major safety

standards

UL, CSA, VDE and TÜV certified

TYPICAL APPLICATIONS

1. Office equipment

Copiers, package air conditioners,

automatic vending machines.

2. Industrial equipment

Machine tools, molding equipment,

wrapping machines, food processing

equipment, etc.

3. Home appliances

Air conditioners, microwave ovens,

televisions, stereo systems, water

heaters and air heating equipment.

Contact

arrangement

1 Form A type 2 Form A type

Contact capacity 30A 20A

Electrical life

(at 20 cpm)

210

Mechanical life

(at 180 cpm)

DC type: 10

, AC type: 510

Type

Single side stable type

HE 1 Form A, 2 Form A

Insulation gap Min. 8 mm

Distance between contacts*

1 Form A and 2 Form A:

Min. 3 mm

PC board type:

Min. 2.5 mm

Breakdown

voltage

Between open contacts 2, 000 Vrms for 1 min.

Between contact and coil 5, 000 Vrms for 1 min.

Kick-off

Gap

Moving plate

At return

re-

ens

on mec

Before operation, the moving

spring is pre-tensioned by

being held down by a moving

plate. As a result, at the ON

moment, with little follow,

contact pressure is ensured

with low bounce.

-o

mec

Even when contact welding

has occurred, at the moment of

return, the moving plate taps

the moving spring (kick-off)

and, in effect, works to tear the

weld apart, thus improving

resistance to welding.

1 Form A 2 Form A

Electrical life

30 A 277 V AC, 10

30 A 250 V AC, 20

25 A 277 V AC, 10

20 A 250 V AC, 20

TV rating TV-15 TV-10

Pre-tension

Moving plate

At operation

Contact follow stroke

Direction of operation

Contact pressure

HE relay

(with pre-tension)

Ordinary relay

(without pre-tension)

Summary of content (14 pages)

PAGE 1
VDE TV-15, 30 AMP (1 Form A) Power Relay HE RELAYS FEATURES TYPICAL APPLICATIONS 1. Excellent resistance to contact welding Owing to the pre-tension and kick-off mechanism, the 1 Form A passes TV-15 and the 2 Form A passes TV-10. 2. High-capacity and long life 1. Office equipment Copiers, package air conditioners, automatic vending machines. 2. Industrial equipment Machine tools, molding equipment, wrapping machines, food processing equipment, etc. 3.
PAGE 2
HE ORDERING INFORMATION HE HE Relay Contact arrangement 1a: 1 Form A (Single side stable type) 2a: 2 Form A (Single side stable type) Pick-up voltage N: 70% of nominal voltage Terminals Nil: Plug-in type S: Screw terminal type Q: TM type P: PC board type Coil voltage DC 6, 12, 24, 48, 100, 110 V AC 12, 24, 48, 100 (100/120), 200 (200/240) V TYPES 1. PC board type (1 Form A, DC coil) (Single side stable) 1 Form A Part No.
PAGE 3
HE 4. Screw terminal type (Single side stable) Type DC type AC type Coil voltage 6V DC 12V DC 24V DC 48V DC 100V DC 110V DC 12V AC 24V AC 48V AC 100/120V AC 200/240V AC 1 Form A Part No. HE1aN-S-DC6V HE1aN-S-DC12V HE1aN-S-DC24V HE1aN-S-DC48V HE1aN-S-DC100V HE1aN-S-DC110V HE1aN-S-AC12V HE1aN-S-AC24V HE1aN-S-AC48V HE1aN-S-AC100V HE1aN-S-AC200V 2 Form A Part No.
PAGE 4
HE 2. Specifications Characteristics Contact Rating Item Arrangement Initial contact resistance, max Contact material Nominal switching capacity (resistive load) Max. switching power Max. switching voltage Max. switching current Nominal operating power Min. switching capacity (Reference value)*1 Specifications 1 Form A 2 Form A Max. 100 m (By voltage drop 6 V DC 1A) AgSnO2 type 30A 277V AC 25A 277V AC 8,310VA 6,925VA 277V AC, 30V DC 30A 25A DC: 1.92W, AC: 1.7 to 2.7VA 100mA 5V DC Min.
PAGE 5
HE 4. Ambient temperature characteristics Tested sample: HE1aN-AC120V, 6 pcs. Rate of change, % 30 -50 -20 20 Pick-up voltage x-x 10 Drop-out voltage 20 40 0 60 80 Ambient temperature, °C -10 -20 -30 2 Form A Type 1. Maximum switching power 2. Life curve 3. Coil temperature rise (DC type) Measured portion: Inside the coil Contact current: 30 A 1,000 AC resistive 10 DC resistive 5 70 500 60 Temperature rise, °C 50 30 20 No.
PAGE 6
HE 2. Plug-in type 1 Form A CAD Data External dimensions Schematic (Bottom view) Single side stable type Single side stable type 36.4 1.433 2-4.5 dia. 2-.177 dia. 1 5 Panel cutout 2-4.5±0.1 dia. 2-.177±.004 dia. 40 1.575 50 1.969 #250 tab terminal 6.35 .250 6 R4 R.157 5 6 0.8 .031 4 4 33 1.299 8.4 10.25 .331 .404 1 40±0.1 1.575±.004 Tolerance: 0.1 .004 10.4 .409 35 1.378 3.5 .138 0.8 .031 General tolerance: 0.3 .
PAGE 7
HE 4. Screw terminal type 1 Form A CAD Data External dimensions Schematic (Bottom view) Single side stable type Single side stable type M4.5 M.177 2-4.5 dia. 2-.177 dia. M3.5 M.138 51.0 2.008 40.0 1.575 14.4 .567 17.5 .689 21.5 .846 16.5 .650 R4 R.157 33.5 1.319 50.0 1.969 1 4 6 5 Panel cutout 2-4.5±0.1 dia. 2-.177±.004 dia. 40±0.1 1.575±.004 Tolerance: 0.1 .004 7.5 .295 44.5 1.752 3.5 .138 0.8 .031 General tolerance: 0.3 .
PAGE 8
HE SAFETY STANDARDS Item UL/C-UL (Recognized) File No. Contact rating CSA (Certified) File No. Contact rating E43028 30A 277V AC 30A 30V DC 1.5HP 125V AC 3HP 250V AC LR26550 30A 277V AC etc. 30A 30V DC 1.5HP 125V AC 3HP 250V AC E43028 25A 277V AC 25A 30V DC 1HP 125V AC 2HP 250V AC LR26550 25A 277V AC etc. 25A 30V DC 1HP 125V AC 2HP 250V AC 1 Form A 2 Form A VDE (Certified) TV rating (UL/CSA) TÜV (Certified) File No. Contact rating File No. Rating File No.
PAGE 9
HE VDE Ideal for Solar inverter Compact size, 1 Form A 48A Power Relay HE RELAYS PV Type FEATURES • 48 A current at 250 V AC achieved in compact size (L: 33  W: 38  H: 36.3 mm L: 1.299  W: 1.496  H: 1.429 inch) Due to improved conduction efficiency, wide terminal blades are used. • High insulation and 10,000 V surge breakdown voltage (between contacts and coil) achieved.
PAGE 10
HE RATING 1. Coil data Nominal coil voltage Pick-up voltage (at 20C 68F) (Initial) Drop-out voltage (at 20C 68F) (Initial) 70%V or less of nominal voltage 10%V or more of nominal voltage Nominal operating current [10%] (at 20C 68F) 6V DC Coil resistance [10%] (at 20C 68F) 320mA 9V DC 12V DC 24V DC Nominal operating power Max. applied voltage (at 20C 68F) 1,920mW 110%V of nominal voltage 18.8 213mA 42.2 160mA 75.0 80mA 300.0 2.
PAGE 11
HE REFERENCE DATA 1. Coil temperature rise Sample: HE1aN-P-DC9V-Y5, 6 pcs. Point measured: coil inside Ambient temperature: 25C 77F, 60C 140F, 85C 185F Contact carrying current: 48A Temperature rise, °C 70 60 25°C 50 60°C 40 85°C 30 20 10 50 60 70 80 90 100 Coil applied voltage, %V Change of pick-up and drop-out voltage Pick-up and drop-out voltage, V Sample: HE1aN-P-DC9V-Y5, 6 pcs. Operation frequency: 6 times/min. (ON/OFF = 1.0s : 9.
PAGE 12
HE NOTES Usage, transport and storage conditions 1) Temperature: –50 to +55C –58 to +131F –50 to +85C –58 to +185F (When applied coil hold voltage is 50% to 60% of nominal coil voltage) 2) Humidity: 5 to 85% RH (Avoid freezing and condensation.) The humidity range varies with the temperature. Use within the range indicated in the graph below.
PAGE 13
HE ACCESSORIES (Terminal sockets) HE RELAY ACCESSORIES FEATURES 1. Snap-in mounting to DIN rails is possible. Can be inserted into 35 mm wide DIN rails. Removal is easy, too. 2. Sure and easy wiring The use of UP terminals makes wiring exceptionally easy and sure. 3. Hold-down clips can be stored in main unit Because the hold-down clips can be stored in the main unit, there is no need to remove them when, for example, wiring is changed. TYPES No. of poles Types Part No.
PAGE 14
HE MOUNTING METHOD 1. Relay mounting 2. Installing to a DIN rail Push 3. Removing from a DIN rail Flat-head screwdriver NOTES 1. Be careful not to drop the relay. It is made of heat-hardened resin and may break. 2. Be sure to tighten the screw-down terminals firmly. Loose terminals may lead to the generation of heat. 3. When the 1 Form A is used in situations covered by the Japanese Electrical Appliance and Material Control Law, the use of 5.5 mm2 cabling and 30 A current is not allowed.