IO-Link Compatible, High-level Self-diagnosis Self-Monitoring Sensor Digital Fiber Sensor FX-550L SERIES Dual Display Digital Pressure Sensor DP-100L SERIES CMOS Type Micro Laser Distance Sensor HG-C1000L SERIES FX-550L SERIES DP-100L SERIES HG-C1000L SERIES Capable of diagnosing own state and reporting to the host device 2018.07 industrial.panasonic.
Self-Monitoring Sensor Reduction of the data analysis burden IO-Link compatible Collecting sensor level data Field data collected and accumulated for “preventive maintenance” and “operation monitoring”. An analysis of such field data requires high-level know-how and time, causing a burden to people responsible for the production site management. The Self-Monitoring Sensor manufactured by Panasonic is capable of reporting sensor data and its own state to the host device through the I/O Link master.
IO-Link Compatible, High-level Self-diagnosis Self-Monitoring Sensor Digital Fiber Sensor FX-550L SERIES Dual Display Digital Pressure Sensor DP-100L SERIES one small step towards IoT. CMOS Type Micro Laser Distance Sensor HG-C1000L SERIES Incorporated high-level self-diagnosis function With the Panasonic’s Self-Monitoring Sensor, you can get high-level solutions! The introduction of IoT requires collection of the incident light intensity data and presents the following problems.
Self-Monitoring Sensor IoT Examples at FA Sites Before the introduction of Self-Monitoring Sensors Preventive maintenance ● We want to avoid production line stoppage that might occur due to unexpected sensor failure. Line stoppage hours × (manufacturing unit cost / hour) = Loss ●We want to minimize the production line down time to almost zero. Problems The amount of data to be collected is large and this may lower the PLC processing capacity. The burden of data analysis is large.
IO-Link Compatible, High-level Self-diagnosis Self-Monitoring Sensor Digital Fiber Sensor FX-550L SERIES Dual Display Digital Pressure Sensor DP-100L SERIES CMOS Type Micro Laser Distance Sensor HG-C1000L SERIES What is “IO-Link”? After the introduction of Self‑Monitoring Sensors From preventive maintenance to predictive maintenance Leave the sensor diagnosis to the sensor itself. FAST & SMART ● All you need to do is to monitor the sensor state.
Self-Monitoring Sensor High-level Self-diagnosis by the Sensor Itself Self-Monitoring Sensor Emission power: 3 times the conventional ratio, Sensing range: 1.6 times max.! FX-550L series event functions Error level Sensor display Normal Displays incident light intensity. Unstable light incidence or unstable light interruption Warning Displays incident light intensity. Operation hours exceeded Warning Displays incident light intensity.
IO-Link Compatible, High-level Self-diagnosis Self-Monitoring Sensor Digital Fiber Sensor FX-550L SERIES Dual Display Digital Pressure Sensor DP-100L SERIES CMOS Type Micro Laser Distance Sensor HG-C1000L SERIES CMOS laser sensor that provides stable detection with a repeatability of 10 μm 0.
FX-550L SERIES Digital Fiber Sensor ORDER GUIDE FX-550L SERIES Amplifiers Type Appearance Model No. Emitting element Control output Red LED PNP open-collector transistor FX-551L3-P-C2 Discrete wire type FX-551L3-P-J M12 connector type (Note) Supports Note: Smartclick is a registered trademark of OMRON Corporation. End plates End plates are not supplied with the amplifier. Please order them separately when the amplifiers are mounted in cascade. Appearance Model No.
Digital Fiber Sensor FX-550L SERIES SPECIFICATIONS Item Model No.
Digital Fiber Sensor FX-550L SERIES WIRING DIAGRAMS FX-550L SERIES FX-551L3-P-C2 Discrete wire type Color code Color code (Brown) +V (Brown) +V +V (White) Control output (DO) DI 50 mA max. (White) Control output (DO) 50 mA max.
Digital Fiber Sensor FX-550L SERIES PRECAUTIONS FOR PROPER USE ••These sensors are only for indoor use. ••Avoid dust, dirt, and steam. ••Make sure that the product does not come in contact with oil, grease, organic solvents such as thinner, etc., strong acid or alkaline. ••This product cannot be used in an environment containing inflammable or explosive gases. ••Never disassemble or modify this product. ••This product adopts EEPROM.
Dual Display Digital Pressure Sensor DP-100L SERIES ORDER GUIDE DP-100L SERIES Model No. DP-10 1 Z L3 - M - P - C Rated pressure range Cable 1 : −100.0 to +100.0 kPa 2 : −0.100 to +1.000 MPa Blank: Discrete wire type (Cable length: 2 m 6.562 ft) C : M12 connector type (Cable length: 0.3 m 0.
Dual Display Digital Pressure Sensor DP-100L SERIES OPTIONS Model No. CN-14A-C1 Connector attached cable Connector attached cable Bendingresistant cable Connector Sensor mounting bracket Panel mounting bracket Front protection cover Conversion bushing Flat attachment Connector attached cable Description Length: 1 m 3.281 ft CN-14A-C2 (Note) Length: 2 m 6.562 ft ••CN-14A-C□ ••CN-14A-R-C□ Discrete wires 0.2 mm2 4-core cabtyre cable with connector on one end Cable outer diameter: ø3.7 mm ø0.
Dual Display Digital Pressure Sensor DP-100L SERIES SPECIFICATIONS DP-100L SERIES Type Item Model No. Discrete wire type M12 connector type For low pressure For high pressure For low pressure For high pressure DP-101ZL3-M-P DP-102ZL3-M-P DP-101ZL3-M-P-C DP-102ZL3-M-P-C Regulatory compliance and certification EMC Directive, RoHS Directive, UL/c-UL Certification Type of pressure Gauge pressure Rated pressure range −100.0 to +100.0 kPa −0.100 to +1.000 MPa −100.0 to +100.0 kPa −0.
Dual Display Digital Pressure Sensor DP-100L SERIES WIRING DIAGRAMS Terminal No. DP-100L SERIES Terminal arrangement diagram of the connector on the sensor side Designation +V Communication output (C/Q) (Note) Control output (DO) 0V Note: When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO).
Dual Display Digital Pressure Sensor DP-100L SERIES PRECAUTIONS FOR PROPER USE DP-100L SERIES ••This catalog is a guide to select a suitable product. Be sure to read instruction manual attached to the product prior to its use. ••Never use this product as a sensing device for personnel protection. ••In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country.
Dual Display Digital Pressure Sensor DP-100L SERIES PRECAUTIONS FOR PROPER USE Flat attachment MS-DP1-F□ ••Make sure to mount MS-DP1-F□ with the sensor properly. If it is not mounted properly, air leakage may occur. ••Take care that the excessive mounting and dismounting of this product may cause deterioration of the O-ring. ••If you touch the O-ring of MS-DP1-F□, or any scratch or dust, etc. is attached to it, air leakage may occur and the sensing performance may deteriorate.
Dual Display Digital Pressure Sensor DP-100L SERIES DIMENSIONS (Unit: mm in) The CAD data can be downloaded from the website. DP-100L SERIES MS-DP1-1 Sensor mounting bracket (Optional) Assembly dimensions ø2.3 ø0.091 9.5 14.5 0.571 0.374 1 0.039 4.2 0.165 2-R2.1 R0.083 2-R2.1 R0.083 4.2 0.165 21 0.827 9.5 14.5 0.571 0.374 30 1.181 20 0.787 13 0.512 25.5 1.004 2-ø3.5 ø0.138 5.3 (0.209 ) 44 R13 20 0.787 R0.512 t2 t 0.079 21 0.827 ø8.3 ø0.327 45 1.772 1.732 20 0.787 30 1.181 4.5 0.
Dual Display Digital Pressure Sensor DIMENSIONS (Unit: mm in) The CAD data can be downloaded from the website. Panel mounting bracket (Optional) Assembly dimensions 42.7 (1.681 ) (0.3829.7) 42.7 1.681 40 30 1.575 1.181 Connector M5 female thread View A 36 +0.5 0 1.417 +0.020 0 Spacer Flat attachment (Optional) ) 52.5 ( 2.067 ) 24 (0.945 ) 30 1.181 52.5 2.067 11 0.433 24 0.945 20 0.787 24 0.945 30 1.181 17.5 0.689 2-ø4.3 ø0.
CMOS Type Micro Laser Distance Sensor HG-C1000L SERIES ORDER GUIDE HG-C1000L SERIES Measurement center distance and measurement range Repeatability Beam diameter (Note) Measurement center 30 mm 1.181 in type 30 ±5 mm 1.181 ±0.197 in 10 μm 0.394 mil ø50 μm 1.969 mil approx. HG-C1030L3-P Measurement center 50 mm 1.969 in type 50 ±15 mm 1.969 ±0.591 in 30 μm 1.181 mil ø70 μm 2.756 mil approx. HG-C1050L3-P Measurement center 100 mm 3.937 in type 100 ±35 mm 3.937 ±1.328 in 70 μm 2.
CMOS Type Micro Laser Distance Sensor HG-C1000L SERIES WIRING DIAGRAMS Discrete wire type Color code Color code (Brown) +V (Brown) +V +V (White) Control output (DO) DI 50 mA max. (White) Control output (DO) 50 mA max.
CMOS Type Micro Laser Distance Sensor HG-C1000L SERIES SPECIFICATIONS Model No. HG-C1000L SERIES Type Item Measurement center 30 mm 1.181 in type Measurement center 50 mm 1.969 in type Measurement center Measurement center Measurement center 100 mm 3.937 in type 200 mm 7.874 in type 400 mm 15.
CMOS Type Micro Laser Distance Sensor HG-C1000L SERIES PRECAUTIONS FOR PROPER USE ••Never use this product as a sensing device for personnel protection. ••In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. ••Do not operate products using methods other than the ones described in the instruction manual included with each product.
CMOS Type Micro Laser Distance Sensor HG-C1000L SERIES DIMENSIONS (Unit: mm in) The CAD data can be downloaded from the website. Sensor 300 11.811 ø4 ø0.157 cable 2 m 6.562 ft (44.7 1.760) ø4 ø0.157 cable Measurement center distance (L) 20 0.787 DOWN key 25 0.984 M12 UP key 3.5 0.138 Beam-emitting axis TEACH key Laser emission indicator (Green) Output operation indicator (Orange) 6.3 0.248 θ Teaching indicator (Yellow) 37 1.