Datasheet

11
9.95 0.392
75 2.953
7 0.276
5.7 0.224
10
0.394
Beam
emitting
part
Beam
receiving
part
36.5 1.437
3 0.118
24 0.945
62.5 2.461
Digital display (Green / Red)
Setting switch MODE switch M12 connectorOperation indicator (Orange)
8.2
0.323
2.8
0.110
R23.2
R0.913
22.7 0.894
1.1 0.043
32 1.260
28 1.102
(47.8 1.882)
(98.3 3.870)
Suitable for 35 mm 1.378 in width DIN rail
ø4 ø0.157 cable
0.3 m 0.984 ft
44.5 1.752
ø15
ø0.591
27.8 1.094
7 0.276
9.2 0.362
36.5
1.437
3.95
0.156
75 2.953
9.2
0.362
2.8
0.110
62.5 2.461
9.95
0.392
Operation indicator
(Orange)
Digital display (Green / Red)
Setting switch
MODE switch
Suitable for 35 mm 1.378 in
width DIN rail
ø3.7 ø0.146 cable
2 m 6.562 ft
8.2
0.323
24
0.945
5.7 0.224
7 0.276
10
0.394
10.5
0.413
28
1.102
32
1.260
3
0.118
27.8
1.094
7
0.276
22.7
0.894
Beam
emitting
part
Beam
receiving
part
PRECAUTIONS FOR PROPER USE
Others
• These sensors are only for indoor use.
• Avoid dust, dirt, and steam.
• Make sure that the product does not come in contact with
oil, grease, organic solvents such as thinner, etc., strong
acid or alkaline.
• This product cannot be used in an environment containing
inammable or explosive gases.
• Never disassemble or modify this product.
• This product adopts EEPROM. Settings cannot be done
a million times or more because of the EEPROM's
lifetime.
• This product has been developed / produced for industrial
use only.
• The specication may not be satised in a strong
magnetic eld.
• The ultra long distance (U-LG, HYPR) mode is more likely
to be affected by extraneous noise since the sensitivity of
that is higher than the other modes. Make sure to check
the environment before use.
• Do not use during the initial transient time (STD: 0.5 sec.,
LONG, U-LG, HYPR: 1 sec.) after the power supply is
switched ON.
MS-DIN-2
Material: Cold rolled carbon steel (SPCC) (Uni-chrome plated)
5.2
0.205
8.5
0.335
21.6 0.850
16 0.630
3.2
0.126
5.2
0.205
3.2
0.126
5
0.197
10
0.394
0.4
0.016
2-
ø
3.2
ø
0.126 holes
7.5
0.295
4.2 0.165
ø
1.8
ø
0.071
2
0.079
35
1.378
2
0.079
t 1
t 0.039
27
1.063
MS-DIN-E
Material: Polycarbonate
1.6
0.063
32
1.260
4
0.157
5.6
0.220
2.75 0.108
M3 (length 18 mm 0.709 in) pan head screws
M3 square nut
24.7
0.972
15
0.591
3
0.118
3
0.118
60
2.362
Suitable for 35 mm 1.378 in width DIN rail
FX-551L3-P-C2
Amplier
FX-551L3-P-J
Amplier
DIMENSIONS (Unit: mm in)
The CAD data can be downloaded from our website.
Digital Fiber Sensor FX-550L SERIES
FX-550L
SERIES
Amplier mounting bracket (Optional)
End plate (Optional)