Datasheet

14
SPECIFICATIONS
Type
Discrete wire type M12 connector type
For low pressure For high pressure For low pressure For high pressure
Item Model No. DP-101ZL3-M-P DP-102ZL3-M-P DP-101ZL3-M-P-C DP-102ZL3-M-P-C
Regulatory compliance and
certication
EMC Directive, RoHS Directive, UL/c-UL Certication
Type of pressure Gauge pressure
Rated pressure range −100.0 to +100.0 kPa −0.100 to +1.000 MPa −100.0 to +100.0 kPa −0.100 to +1.000 MPa
Set pressure range −101.0 to +101.0 kPa −0.101 to +1.010 MPa −101.0 to +101.0 kPa −0.101 to +1.010 MPa
Pressure withstandability 500 kPa 1.5 MPa 500 kPa 1.5 MPa
Applicable uid Non-corrosive gas
Supply voltage 12 to 24 V DC ±10 % Ripple P-P 10 % or less
Power consumption (Note 2)
Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)
ECO mode: 480 mW or less at STD (Current consumption 20 mA or less at 24 V supply voltage)
360 mW or less at FULL (Current consumption 15 mA or less at 24 V supply voltage)
Communication
output (C/Q)
(Note 3)
IO-Link
communication
IO-Link Specication V1.1
Baud rate COM3 (230.4 kbps)
Process data 4 byte
Minimum
cycle time
1.0 ms
Control output (DO)
PNP open-collector transistor
• Maximum source current: 50 mA
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 2 V or less (at 50 mA source current)
Output operation NO/NC (selectable by key operation)
Output modes EASY mode / Hysteresis mode / Window comparator mode
Hysteresis Minimum 1 digit (variable)
Repeatability
±0.1 % F.S. (within ±2 digits) ±0.2 % F.S. (within ±2 digits) ±0.1 % F.S. (within ±2 digits) ±0.2 % F.S. (within ±2 digits)
Response time 2.5 ms, 5 ms, 10 ms, 25 ms, 50 ms, 100 ms, 250 ms, 500 ms, 1,000 ms, 5,000 ms, selectable by key operation
Short-circuit protection Incorporated
Display 4 digits + 4 digits 3-color LCD display (Display refresh rate: 250 ms, 500 ms, 1,000 ms, selectable by key operation)
Displayable pressure range −101.0 to +101.0 kPa −0.101 to +1.010 MPa −101.0 to +101.0 kPa −0.101 to +1.010 MPa
Output indicator
Orange LED
Output operation indicator 1: Flashes during IO-Link communication, Lights up when the control output is ON
during non-IO-Link communication (synchronized with the output operation indicator 2)
Output operation indicator 2: Lights up when the control output is ON
Environmental resistance
Protection IP40 (IEC)
Ambient temperature −10 to +50 °C +14 to +122 °F (No dew condensation or icing allowed), Storage: −10 to +60 °C +14 to +140 °F
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 50 MΩ or more with 500 V DC megger between all supply terminals connected together and enclosure
Vibration resistance
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude or maximum acceleration 196 m/s
2
, in X, Y and Z directions for two
hours each
when panel or at attachment is mounted: 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude or maximum
acceleration 49 m/s
2
, in X, Y and Z directions for two hours each
Shock resistance 100 m/s
2
acceleration (10 G approx.) in X, Y and Z directions three times each
Temperature characteristics
Within ±0.5 % F.S.
(at +20 °C +68 °F)
Within ±1 % F.S.
(at +20 °C +68 °F)
Within ±0.5 % F.S.
(at +20 °C +68 °F)
Within ±1 % F.S.
(at +20 °C +68 °F)
Pressure port M5 female thread
Material
Enclosure: PBT (glass ber reinforced), LCD display: Acrylic, Pressure port: Stainless steel (SUS303) ,
Mounting threaded part: Brass (nickel plated), Switch part: Silicone rubber
Connecting method Connector
Cable length
Total length up to 20 m 65.617 ft (Condition of CE compliance less than 20 m 65.617 ft) is possible with 0.3 mm
2
, or more,
cable.
Weight Net weight: 30 g approx., Gross weight: 125 g approx. Net weight: 30 g approx., Gross weight: 95 g approx.
Accessories
CN-14A-C2 (Connector attached cable 2 m 6.562 ft): 1 pc.
Dedicated M12 connector cable, 0.3 m 0.984 ft long: 1 pc.
Notes: 1) Where measurement conditions have not been specied precisely, the conditions used were an ambient temperature of +20 °C +68 °F.
2) The power consumption does not include the output load current.
3) When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO).
Dual Display Digital Pressure Sensor DP-100L SERIES
DP-100L
SERIES