Datasheet

20
ORDER GUIDE
OPTIONS
Designation Model No. Description
Simple mounting
bracket (Note)
MS-HG-01
Foot angled mounting bracket
Note: Due to the simple mounting bracket, the sensing characteristics may not be hold depending on the
installation condition, in case of the purposes for acquiring the displacement data and a ne
detecting.
Simple mounting bracket
• MS-HG-01
Material: Stainless steel (SUS304)
Two M3 (length 25 mm 0.984 in)
screws with washers (SPCC) are
attached.
Type Appearance
Measurement center
distance and
measurement range
Repeatability
Beam
diameter
(Note)
Model No.
Control
output
Discrete wire type
Measurement
center 30 mm
1.181 in type
30 ±5 mm
1.181 ±0.197 in
10 μm
0.394 mil
ø50 μm
1.969 mil
approx.
HG-C1030L3-P
PNP
open-
collector
transistor
Measurement
center 50 mm
1.969 in type
50 ±15 mm
1.969 ±0.591 in
30 μm
1.181 mil
ø70 μm
2.756 mil
approx.
HG-C1050L3-P
Measurement
center 100 mm
3.937 in type
100 ±35 mm
3.937 ±1.328 in
70 μm
2.756 mil
ø120 μm
4.724 mil
approx.
HG-C1100L3-P
Measurement
center 200 mm
7.874 in type
200 ±80 mm
7.874 ±3.150 in
200 μm
7.874 mil
ø300 μm
11.811 mil
approx.
HG-C1200L3-P
Measurement
center 400 mm
15.748 in type
400 ±200 mm
15.748 ±7.874 in
300 μm 11.811 mil
(Measuring distance
200 to 400 mm 7.874 to 15.748 in)
800 μm 31.496 mil
(Measuring distance
400 to 600 mm 15.748 to 23.622 in)
ø500 μm
19.685 mil
approx.
HG-C1400L3-P
M12 connector type
Measurement
center 30 mm
1.181 in type
Supports
(Note 2)
30 ±5 mm
1.181 ±0.197 in
10 μm
0.394 mil
ø50 μm
1.969 mil
approx.
HG-C1030L3-P-J
Measurement
center 50 mm
1.969 in type
50 ±15 mm
1.969 ±0.591 in
30 μm
1.181 mil
ø70 μm
2.756 mil
approx.
HG-C1050L3-P-J
Measurement
center 100 mm
3.937 in type
100 ±35 mm
3.937 ±1.328 in
70 μm
2.756 mil
ø120 μm
4.724 mil
approx.
HG-C1100L3-P-J
Measurement
center 200 mm
7.874 in type
200 ±80 mm
7.874 ±3.150 in
200 μm
7.874 mil
ø300 μm
11.811 mil
approx.
HG-C1200L3-P-J
Measurement
center 400 mm
15.748 in type
400 ±200 mm
15.748 ±7.874 in
300 μm 11.811 mil
(Measuring distance
200 to 400 mm 7.874 to 15.748 in)
800 μm 31.496 mil
(Measuring distance
400 to 600 mm 15.748 to 23.622 in)
ø500 μm
19.685 mil
approx.
HG-C1400L3-P-J
Notes: 1) This is the size in the measurement center distance. These values were dened by using 1/e
2
(13.5% approx.) of the center light intensity.
Due to leak light outside the specied area, the reectance around the detecting point may be higher than at the point and this may affect the
measurement value.
2) Smartclick is a registered trademark of OMRON Corporation.
CMOS Type Micro Laser Distance Sensor HG-C1000L SERIES
HG-C1000L
SERIES
Manufactured by OMRON Corporation
Extension cable with connectors on both ends XS5W series
* Smartclick is a registered trademark of OMRON Corporation. Contact the manufacturer for details of the recommended products.
Recommended extension cables for M12 connector type