Operating Instructions

52 EN
Installing the Appliance
Electrical connection
• Before connection, check that the mains voltage corresponds to that indicated on
the rating plate xed to the inside of the appliance. This data must correspond in
order to avoid the risk of damage to the appliance.
• Check that the domestic power supply guarantees adequate earthing.
• Once installed, it should be easy to isolate the appliance from the electricity
supply by pulling out the plug or operating a circuit breaker.
• The appliance must only be connected with the power cable provided.
• DO NOT use multi-plug adaptors power strips or extension leads. There is a risk
of re in the event of overloading.