Operating Instructions

SQT1200

Names and Functions of

Components

1 Lens surface

2 Built-in slide lens hood

(P6)

3 Focus ring

Rotate to focus when taking pictures with manual focus (MF).

4 Zoom lock ring

When carrying the lens, rotate this ring to lock the zoom ring

to prevent the lens from extending under its own weight.

• Do not rotate the zoom ring when the zoom lock ring is set

to [LOCK].

5 Zoom ring

Rotate the zoom ring when you wish to take large (tele) or

wide (wide angle) pictures.

6 Tripod mount (P8)

7 Orientation locking knob (P8)

8 O.I.S. switch

When the lens is attached to the camera the stabiliser

function is set to activate if the O.I.S. switch is set to [ON].

• We recommend setting the O.I.S. switch to [OFF] when

using a tripod.

9 [AF/MF] switch

This allows you to switch between Auto Focus (AF) and

Manual Focus (MF).

• When either the [AF/MF] switch of the lens or the setting of

the camera is set to [MF], Manual Focus (MF) is enabled.

10 Focusing distance range selector switch

[FULL]: It can focus between the ranges of 1.3 m

(4.27 feet) to ¶.

[5m-¶]: It can focus between the ranges of 5.0 m

(16.4 feet) to ¶. The speed of focusing with

auto focus will be faster.

11 Lens fitting mark

12 Lens mount rubber

13 Contact points

1 2 3 4 5 6 7 8

[LOCK]: Locks the zoom ring.

[UNLOCK]: Unlocks the zoom ring.

SQT1200_E.book 5 ページ２０１９年６月１０日　月曜日　午後５時５６分