Operating Instructions

SQT1299

∫ Temporarily Storing the Lens Hood

1 Rotate the lens hood C in

the direction of the arrow

and then remove.

2 Align the mark B ( ) on the lens hood with

the mark on the tip of the lens.

3 Rotate the lens hood in the direction of the

arrow until it clicks into place.

Note

• If you use a lens hood and the flash at the same time, the

lens hood will block the light from the flash, causing the lower

portion of the screen to darken (vignetting) and making it

impossible to adjust the amount of light. We recommend not

using the lens hoods and flash at the same time.

SQT1299_E.book 7 ページ２０１６年５月３０日　月曜日　午前１１時５分