Operating Instructions

- 34 -
This is for recording still pictures at a set interval.
≥ Set [RECORDING MODE] to [PICTURE RECORDING]. (l 30)
1 Press the joystick to select the menu.
≥ If you set this item to [OFF], normal still pictures will be recorded.
2 Press the recording start/stop button to start recording.
≥ Still pictures will be recorded at specified intervals.
≥ Once recording starts, the LCD monitor will turn off approximately 30 seconds later. To turn it on
again, operate the joystick.
3 Press the recording start/stop button again to pause recording.
This is for automatically correcting the horizontal tilt of an image.
≥ [LEVEL SHOT] operates when starting to record a motion picture or still picture or when starting
to perform a live broadcast.
≥ [LEVEL SHOT] will not work in the following cases:
j When the tilt of the camera is large
j When motion is continuous
≥ [LEVEL SHOT] cannot be set in the following cases:
j When [RECORDING MODE] is set to [SLOW MOTION]
j When the [PIXELS / FRAME RATE] is set to [3840k2160/25p], [1920k1080/50p] or
[1280k720/50p].
j When [ANGLE OF VIEW] is set to [WIDE].
j When [COLOUR NIGHT VIEW] is set to [ON]
This is for reducing camera shakes.
≥ [IMAGE STABILIZATION] cannot be set in the following cases:
j When [RECORDING MODE] is set to [SLOW MOTION]
j When the [PIXELS / FRAME RATE] is set to [3840k2160/25p], [1920k1080/50p] or
[1280k720/50p].
j When [ANGLE OF VIEW] is set to [WIDE].
j When [LEVEL SHOT] is set to [NORMAL]
j When [COLOUR NIGHT VIEW] is set to [ON]
≥
The compensation may not be as effective in an extremely dark place or when shakes are too strong.
≥ This may not work correctly when this unit is at rest.
[INTERVAL REC MODE]
[RECORD SETUP] # [INTERVAL REC MODE] # desired setting
[60 SECONDS]/[30 SECONDS]/[10 SECONDS]/[5 SECONDS]/[3 SECONDS]/[OFF]
[LEVEL SHOT]
[STRONG]/[NORMAL]/[OFF]
[IMAGE STABILIZATION]