Operating Instructions

- 44 -

Preparations before using remote operation

1 Install the smartphone application “Image App” on your smartphone. (l 56)

2 Check if the smartphone is an Android (NFC-compatible), Android (non-NFC-

compatible), or iOS device.

≥ If your smartphone is NFC-compatible, a message asking you to touch the NFC mark on the

device will be displayed when starting up the “Image App”.

≥ This operation is not possible while this unit is recording.

Proceed to “Using remote operation with a direct connection ([SMARTPHONE MODE])”.

1 Check if the wireless access point is compatible with IEEE802.11b/g/n.

2 Set up a Wi-Fi connection between this unit and the wireless access point.

≥ [Easy Connection (WPS)] (l 59)

≥ Searching for wireless access points to set up a connection (l 60)

≥ Setting up a connection manually (l 62)

* This operation is not possible while this unit is recording.

When the Wi-Fi connection is complete, proceed to “Using remote operation with a wireless access

point connection ([ACCESS POINT MODE])”. (l 46)

Using remote operation with a direct connection

([SMARTPHONE MODE])

∫ If the device is Android (NFC-compatible)

≥ Set the NFC function of the smartphone to on.

1 Start up the smartphone application “Image App”.

2 Touch the smartphone on of this unit.

≥ Touch the NFC mark while a message asking you to touch the NFC

mark on the device is displayed on the smartphone screen.

≥ If this is the first time the smartphone is connecting to this unit, the

message is displayed on the screen of this unit. Select [YES], press

the joystick, and then touch the smartphone on of this unit again.

≥ If the unit is not recognised even when touching the smartphone,

change positions and try again.

≥ You cannot set up a connection when recording an image with this unit

or the menu screen is displayed.

≥ When the connection is complete, images of this unit is displayed on the smartphone screen.

Setting up a direct Wi-Fi connection between this unit and a

smartphone

Setting up a Wi-Fi connection via a wireless access point