Operating Instructions

- 46 -
Using remote operation with a wireless access point
connection ([ACCESS POINT MODE])
∫ If the device is Android (NFC-compatible)
≥ Set the NFC function of the smartphone to on.
1 Connect the smartphone to a wireless access point.
≥ When you connect using NFC for the first time, please make connection of this unit and a
wireless access point. (l 59)
≥ You need to connect this unit and a smartphone to the same wireless access point via Wi-Fi.
2 Start up the smartphone application “Image App”.
3 Touch the smartphone on of this unit.
≥ Touch the NFC mark while a message asking you to touch the NFC
mark on the device is displayed on the smartphone screen.
≥ If this is the first time the smartphone is connecting to this unit, the
message is displayed on the screen of this unit. Select [YES], press
the joystick, and then touch the smartphone on of this unit again.
≥ If the unit is not recognised even when touching the smartphone,
change positions and try again.
≥ You cannot set up a connection when recording an image with this unit
or the menu screen is displayed.
≥
When the connection is complete, the thumbnails of motion pictures or still pictures recorded on this
unit will be displayed on the smartphone screen.
If you touch the second smartphone when this unit has already been connected
to the first one
The remote operation with the first smartphone that has been connected to this unit will be cut off,
and the newly touched smartphone will be connected.
≥ The connection cannot be established while this unit is recording or copying a file to the
smartphone during remote operations.
∫ If the device is Android (non-NFC-compatible) or iOS
1 Set [Wi-Fi MODE] to [ACCESS POINT MODE]. (l 42)
≥ Confirm that the Wi-Fi mode has started up in [ACCESS POINT MODE].
2 Connect the smartphone to a wireless access point.
≥ You need to connect this unit and a smartphone to the same wireless access point via Wi-Fi.
3 Start up the smartphone application “Image App”.
≥ When the connection is complete, the thumbnails of motion pictures or still pictures recorded on
this unit will be displayed on the smartphone screen.
To exit [ACCESS POINT MODE]:
Move the joystick left.
≥ The message is displayed. Select [YES], then press the joystick to exit.
≥ If you touch an NFC-compatible smartphone on this unit, you can register up to five smartphones.
When the number exceeds five, registrations will be deleted, starting from the oldest touched one.
≥ Please refer the instructions for the device you are using for information on how to set up and use
a NFC-compatible smartphone.