Operating Instructions

- 51 -
Screen displays during a live broadcast
In [LIVE CAST], [RECORDING MODE] will be set to [NORMAL SHOOTING] and [PIXELS /
FRAME RATE] will be set to [1920k1080/25p] even when they are set to the following options:
j When [RECORDING MODE] is set to [SLOW MOTION], [LOOP RECORDING] or [PICTURE
RECORDING]
j When [PIXELS / FRAME RATE] is set to [3840k2160/25p], [1920k1080/50p] or [1280k720/
50p]
If this unit is on the e-mail sender block list of destination devices or if their firewall setting is
enabled, the Wi-Fi function may not work correctly when you send an e-mail. If this occurs, check
the network settings.
Depending on the e-mail rejection or firewall setting at the destination address, e-mails may not
be delivered.
In the following cases, live broadcasting is not available.
j When the clock setting is out of sync
j When two cameras simultaneously perform live broadcasts at the same account (The camera
that has started the broadcast first will be disconnected from the broadcast)
When the live broadcast cannot be watched on a USTREAM application for TVs or smartphones,
cancel the Password for the Programme, and restart the broadcast.
Image content may be leaked to third parties depending on the USTREAM image publication
method settings. Set the publication range and Password using USTREAM if required.
If a live broadcast motion picture is saved on the USTREAM side, the file name will be the same
as the channel name.
The live broadcast stops as the elapsed broadcast time exceeds 8 hours 30 minutes, and then it
starts again. (A separate file will be saved on the USTREAM side.)
Setting the audio of live broadcasts
You can set the audio output for live broadcasts on this unit.
1 Press the joystick to display the [LIVE CAST] menu.
2 Select [Microphone OFF] or [Microphone ON], then press the joystick.
If you broadcast and record a motion picture simultaneously when this item is set to [Microphone
OFF], the sound of the broadcast will not be recorded.
/ Wi-Fi mode icon
1h23m
Elapsed time of the live broadcast
This is displayed during a live broadcast.
Microphone setting
The indication appears when
[Microphone OFF] is set.
Configuring the live broadcast settings
[Microphone OFF]: Sound is not output during live broadcasts.
[Microphone ON]: Sound is output during live broadcasts.