Operating Instructions

VQT3N01 27

SETUP

INSTALLING THE CARD

Before using a newly purchased card or one that was used in another device,

be sure to format it with this camera (page 105 and 116). If an unformatted

card is used, the card itself may become unusable.

h To remove the card, press it in, and then release. The card will

protrude slightly, and you can then pull it out.

Card’s label side

2 Insert the card

1 Open

3 Close

i Push straight in

until you hear a

click.

4 Close firmly

until you hear

a click.

1 Push the middle part of the card.

2 Pull the card

out straight.