Operating Instructions

VQT3N01 31
SETUP
DATE AND TIME SETTING
The camera will record the date and time an image or audio recording is
taken so that you can display them during playback. Therefore, before
capturing images, make sure the correct date and time are set.
h If the screen to set the date and time appears when you turn on the
camera, skip to step 3 and follow the steps to set the date and time.
h To correct the date and time setting, please see under HINT on page 33.
Example: To set the clock to 19:30 on 20 December, 2011
1 Turn on the camera (page 29), and display Option Setting Menu 1
(page 101).
2 Select [CLOCK SET] and press
the SET button.
h The Clock Set Screen appears.
h Follow the procedures below to
enable or disable the date
display during playback, to set
the display format for the date,
and to set the date and time.
3 Set the date.
1 Select [DATE].
2 Press the SET button.
h The Set Date Screen
appears.
3 Set the date to “20/12/2011”.
h The date is set in the
following order: Set the day
→ Set the month → Set the
year.
h Toggle the SET button left or
right to select day, month or
year. Toggle the SET button
up or down to increase or
decrease the number.
4 Press the SET button.
SET
01/01/2011
00:00
CLOCK SET
DATE
TIME
DISP D / M / Y
ENTER
SET
20/12/2011
CLOCK SET
ENTER
DATE