Operating Instructions

VQT4F52 23
Charging the battery
The unit is in the standby condition when the AC adaptor is connected.
The primary circuit is always “live” as long as the AC adaptor is
connected to an electrical outlet.
Important:
≥ Be sure to use the supplied AC adaptor and USB cable. Do not
use parts supplied with other equipment.
≥ The AC adaptor and USB cable are for use with this unit only. Do
not use them with other equipment. Similarly, do not use AC
adaptors and USB cables from other equipment with this unit.
≥ The battery is charged while the unit is off or in the sleep mode.
The battery cannot be charged while the unit is recording or
playing back.
≥
It is recommended to charge the battery in a temperature between
10
o C and 30 o C. (The battery temperature should also be the same.)
A Status indicator
B AC adaptor
C To the AC outlet
≥ Insert the plugs as far as they will go.
When this unit is purchased, the battery is not charged. Charge
the battery fully before using this unit for the first time.






Simplified-HX-WA20EG-VQT4F52_mst.book 23 ページ ２０１２年２月１３日 月曜日 午後１時３２分