Operating Instructions

VQT4F52 29
2 Insert (remove) the SD card into (from) the card slot.
3 Close the rear door.
Do not touch the terminals on the back of the SD card.
Do not shock, bend, or drop the SD card.
Electrical noise, static electricity or the failure of this unit or the SD card
may damage or erase the data stored on the SD card.
Face the label side A in the direction shown in the illustration and
press it straight in as far as it will go.
Press the centre of the SD card and then pull it straight out.
1 Close the rear door.
2 Slide the open/close lever.
3 Lock the LOCK lever.
Lock securely to the points where the red portion of the open/close
lever and LOCK lever are no longer visible.
LOCK
SD CARD/
BATTERY
Simplified-HX-WA20EG-VQT4F52_mst.book 29 ページ 2012年2月13日 月曜日 午後1時32分