User manual

4.5.3 Communication Settings of PLC using FPWIN GR

Please read below to make PLC communication settings using the FPWIN GR.

1. Select "Option (O)" > "PLC Configuration".

2. Make the communication settings.

Select “Tool Port" setting when connecting to the tool port or “COM Port" setting when connecting to the

COM port. Please match the communication format (or transmission format) and baud rate settings to

those of the GT.

In addition to the transfer format and baud rate settings, set the communication mode to "Computer Link"

when using the COM port.

Comm. Mode: Computer Link

Baud Rate: 9600 bps

Char. Bit: 8 bits

Parity: Odd

Stop Bit: 1

Note) The baud rate can be changed from 9600 bps.

When changing it, it is necessary to make the both baud rates of FP series and GT series be the same.

4-34