Operating Manual Document Scanner Model No. KV-S2087 These instructions contain information on operating the scanner. Before reading these instructions, please read the Quick Installation Guide enclosed with this unit. Keep all documentation in a safe place for future reference. Current model availability depends on your country/area. Please contact your dealer.
Introduction Introduction Thank you for purchasing a Panasonic Document Scanner. Feature Highlights High-speed Double Sided Scanning • This scanner can scan documents at high speed, regardless of the image type (monochrome / color). Background Color Switch Function • Using the software, you can switch the background color of scanned images between white and black. Double Feed Detection Function • This scanner contains an ultrasonic sensor for the detection of double feeding.
Introduction Abbreviations • Windows® refers to the Microsoft® Windows® operating system (hereafter Windows). • Windows® XP refers to the Microsoft® Windows® XP operating system (hereafter Windows XP). • Windows Vista® refers to the Microsoft® Windows Vista® operating system (hereafter Windows Vista). • The explanations and screen shots in this manual are based on the Windows 7 operating system. • The screen shots used in this manual may differ from the screens displayed on your computer.
Introduction About the Documentation The scanner documentation consists of 2 manuals: the Operating Manual (this manual), and the Quick Installation Guide. Operating Manual (this manual) This manual provides information about the operation of the unit. Quick Installation Guide The Quick Installation Guide explains about safety precautions and other important information, and outlines brief installation procedures of the unit and software. About the Software Help Each software contains help files.
Introduction System Requirements Computer IBM® PC/AT or compatible machine with a CD-ROM drive CPU Intel® Core™ 2 Duo 1.8 GHz or higher Interface USB 2.0 / USB 3.0 Note • For details about the system requirements, refer to [Read me first] in the Software / Manual CD-ROM. • The scanning speed differs depending on the host computer’s operating environment or the application used. • Due to the slower speed of USB 1.1, it is recommended to use a USB 2.0 / USB 3.0 interface.
Table of Contents Table of Contents 1 Before You Start ..................................................................................... 8 1.1 1.2 Precautions ...................................................................................................................... 8 Check the Accessories ................................................................................................. 10 2 Location of Controls .............................................................................
Table of Contents 6.2.1 Cleaning the Conveyor and Scanning Glasses ............................................................ 46 Cleaning the Sensors ................................................................................................... 47 6.2.2 6.2.3 Cleaning the Rollers ..................................................................................................... 48 6.2.3.1 Location of Rollers ..........................................................................................
1 Before You Start 1 Before You Start 1.1 Precautions Illegal Duplication It is unlawful to make duplication of certain documents. Duplicating certain documents may be illegal in your country/area. Penalties of fines and/or imprisonment may be imposed on those found guilty. The following are examples of items that may be illegal to duplicate in your country/area.
1.1 Precautions Roller Cleaning Paper Using a pair of scissors, open the bag along the dotted line ( ), and take out the roller cleaning paper. 1 Notice • Keep the roller cleaning paper out of reach of small children. • Do not store the roller cleaning paper in direct sunlight or in a place with a temperature over 40 ℃ (104 ℉). • Only use the roller cleaning paper to clean the rollers. • For details about the roller cleaning paper, please refer to the Material Safety Data Sheet (MSDS).
1.2 Check the Accessories 1.2 Check the Accessories Check that all accessories are included before installing the unit. In the event that an item is missing, please contact your dealer. Accessories Name Notes Power cord Two power cords may be included. Use the power cord appropriate for where you use the unit.
2 Location of Controls 2 Location of Controls 2.1 Main Unit 2.1.1 Front 11 10 9 8 7 6 1 5 2 3 4 Document guides Feed extension tray Feed tray ADF door Manual feed selector You can select the document feeding method. : Manual feeding : Automatic feeding Paper path selector You can select the paper path for documents. : U-turn path (front exit) : Straight path (rear exit) Operation panel For details, see "2.2 Operation Panel" (page 13).
2.1.2 Rear 2.1.2 Rear 7 1 2 3 4 5 6 AC inlet Power cord Security slot Use a commercially available security cable. USB cable USB connector Fan exhaust vent Imprinter door You open this door when installing an imprinter unit (sold separately) or ink cartridge. For details about installing an imprinter unit, refer to "7.1 Installing the Imprinter Unit and Ink Cartridge" (page 57).
2.2 Operation Panel 2.2 Operation Panel LCD Selected jobs, error codes, notification messages, and the scanner status are displayed. Power button Press the power button for more than one second to turn the unit off. LED (Red) Lights when an error occurs. 1 LED (Green) Shows the scanner’s status. OK button 2 3 4 5 6 7 Cursor button If you are using the scanner with Image Capture Plus, you can perform a push scan using the LCD.
2.2.1 About LED 2.2.
2.2.2 About LCD 2.2.2 About LCD The status of the unit is displayed on the LCD as follows. LCD Status The scanner is warming up. The USB cable is not connected. The Scanner status and scanning counter are displayed. 123 Examples of displays of scanner statuses are as follows.
3 Installation 3 Installation 3.1 Required Space Around the Scanner In order to ensure proper operation, install the unit maintaining the proper distances from surrounding objects, as shown in the following illustration. 242 mm (9.6 in.) 320 mm (12.6 in.) 319 mm (12.6 in.) 350 mm (13.8 in.) 810 mm (31.9 in.) 750 mm (29.5 in.) Notice • Do not move the unit immediately from a cold place to a warm place. It may cause condensation, which may damage the unit.
3.2 Installing the Software 3.2 Installing the Software Notice • Make sure to connect the unit to your computer after installing the software. Connecting the unit to your computer and turning on the unit’s power before installing the software may influence the software installation. If you connect the unit to your computer and turn on the unit’s power before installing the software by mistake, install the software after disconnecting the unit from your computer.
3.2 Installing the Software 4. Select the desired installation methods from "Software" on the left side of the screen. • If you selected [Complete], continue to step 6. • If you selected [Custom], continue to step 5. 5. If you selected [Custom] for the installation type in step 4, select the item that you want to install. Note • If you select TWAIN or ISIS, Image Capture Plus will also be installed. 6. Follow the instructions on the screen and complete the installation.
3.3 Installing the Unit 3.3 Installing the Unit 1. Remove all packing tapes. 2. Open the feed tray. 3. Pull out the feed extension tray.
3.3 Installing the Unit 4. Pull out the exit extension tray 1. 5. Open the exit extension tray 2. 6. Plug in the power cord and connect the USB cable. 7. Press the power button to turn ON the unit’s power. • The LED (Green) will flash and then turn on. • If the hardware wizard appears, follow the on-screen instructions to complete installation.
3.4 Viewing Operating Manual and Help Installed 3.4 Viewing Operating Manual and Help Installed You can view the Operating Manual and the software help installed on the computer. 3.4.1 To view the Operating Manual 1. Select [All Programs] → [Panasonic] → [Scanner Manuals]. 2. Select the manual. • The manual will open. Note • In Windows 8, select the [Panasonic Document Scanner] section on the Apps screen. 3.4.2 To view the help 3.4.2.1 For Image Capture Plus 1.
4 Operation 4 Operation 4.1 Preparing Documents Notice • Make sure to remove paper clips and staples from documents before scanning. Failing to do so can damage the unit, document, or both. • Before feeding, ensure that the document is not creased or folded. If the document is creased or folded, a paper jam or damage to the document may occur. • When scanning important documents, confirm that the number of scanned images matches the number of pages in the feed tray.
4.1.1 Compatible Paper 4.1.1 Compatible Paper Paper size: Width Length The compatible paper sizes for this unit are as follows. *1 Width 48 mm – 216 mm (1.9 in. – 8.5 in.) Length Manual feeding: 70 mm – unlimited (2.8 in. – unlimited)*1 Automatic feeding: 70 mm – 356 mm (2.8 in. – 14 in.) Using "Long Paper", you can scan a long document to a series of split scanned images. For details about "Long Paper", refer to the Image Capture Plus, TWAIN, or ISIS help. Paper thickness: 0.04 mm – 0.66 mm (1.
4.1.1 Compatible Paper Paper types: • High-quality woodfree paper • Bond paper • Newspaper • Bank checks • Post card Note • High-quality woodfree paper is the recommended paper type. • Documents must also meet the following conditions: Paper weight: 20 g/m² (5 lb.) – less than 157 g/m² (42 lb.) Curl Less than 10 mm (0.4 in.) Folding Less than 10 mm (0.4 in.) Feeding direction Feeding direction Paper weight: 157 g/m² (42 lb.) – 546 g/m² (146 lb.) Curl Less than 3 mm (0.12 in.
4.1.2 Carrier Sheet 4.1.2 Carrier Sheet You can use an optional carrier sheet (KV-SS076) to scan incompatible documents like very thin paper, curled or wrinkled documents, photographs etc. When using carrier sheet, please note following conditions for the documents. Carrier sheet (including the documents): Width: 150 mm (5.91 in.) Length: 200 mm (7.87 in.) Thickness: 2 mm (0.08 in.) or less The corner of the document should be adjusted to match the corner of the carrier sheet.
4.1.3 Incompatible Documents 4.1.3 Incompatible Documents Notice Do not scan the following types of paper: • Documents out of specified size, thickness, and weight • Thermal or photosensitive paper • Cloths or metallic sheets • Transparent or partially transparent documents such as OHP sheet, tracing paper, plastic film, etc. • Documents containing hard attachments such as metal or plastic (ex.
4.1.4 Notes about Documents for Scanning 4.1.4 Notes about Documents for Scanning • Depending on the paper type, scanning results may be poor when you scan incompatible documents, or even documents that should be compatible. If scanned images are skewed, paper jams occur, or double feeding occurs, try scanning again after doing the following: – Cleaning the Inside of the Scanner. Refer to "6.2 Cleaning the Inside of the Scanner" (page 44). – Reduce the number of sheets of paper loaded on the feed tray.
4.2 Scanning Documents 4.2 Scanning Documents 1. Adjust the document guides ( ) slightly larger than the actual size of the documents. • Move the document guide while pressing the lever ( ) of the document guide. 2 1 2. Fan the documents. • Documents that have been stapled together or stacked together (as in a file folder) will need to be separated. Fan the stack of documents to separate all the edges. Hold both ends and bend the documents as shown in the illustration.
4.2 Scanning Documents 4. Place the documents on the feed tray ( ) with the side to be scanned facing up. Then push the documents in the direction of the arrow until they stop. 2 1 Notice • The height of the documents should not exceed the limit mark ( ) on the document guide. Exceeding the limit mark may cause a paper jam or skewing. 5. Slide the document guides ( ) to match the width of the document to be scanned. • Move the document guide while pressing the lever ( ) of the document guide. 2 1 6.
4.2.1 Switching the Background Color of Scanned Images 4.2.1 Switching the Background Color of Scanned Images Using the software, you can switch the background color of scanned images between white and black. For details, refer to the Image Capture Plus, TWAIN, or ISIS help. 4.2.2 Using the Straight path (rear exit) You can select Straight path (rear exit) with the Paper path selector.
4.2.3 Using Manual feeding 4.2.3 Using Manual feeding You can select Manual feeding with the Manual Feed Selector. • : Manual feeding • : Automatic feeding When using manual feeding, the documents are scanned without separation. Place the documents on the feed tray one by one. Manual feeding is recommended to scan important documents or bound documents. Automatic feeding is recommended for normal use. Note Double feed detection is not available when using manual feeding.
4.2.4 Feeding method and paper path by document type 4.2.4 Feeding method and paper path by document type Select the paper path and feeding method according to the document type. Feeding method Automatic feeding Paper path U-turn path (front exit) Normal documents Straight path (rear exit) Stiff or thick documents Documents that caused a paper jam in the U-turn path (front exit). U-turn path (front exit) Bound documents Important documents that require care in handling.
4.2.5 When feeding stiff or thick documents 4.2.5 When feeding stiff or thick documents When feeding stiff or thick documents, please note following. • If the document is curled, correct and flatten the documents. • If paper is not feeding well when Manual feeding and Straight path (rear exit) are used, feed documents using the following procedure. 1. Start scanning. 2. Insert the document as shown in the illustration until the paper feed roller rotates. 3.
4.2.6 Using Carrier sheet 4.2.6 Using Carrier sheet You can use an optional carrier sheet (KV-SS076) to scan incompatible documents like very thin paper, curled or wrinkled documents, photographs etc. For the conditions for documents when using the carrier sheet, please refer to "4.1.2 Carrier Sheet" (page 25). 1. Set the paper path selector to Straight path (rear exit). 2. Set the manual feed selector to Manual feeding. 3. Place the carrier sheet on the feed tray with the surface to be scanned facing up.
4.3 Using Push Scan 4.3 Using Push Scan This scanner has a push scan function for starting scanning without operation through a computer. 4.3.1 Setting the scanning conditions Scanning conditions are set on the setting screen of each application. For details about the setting screen of each application, refer to the manual or help for that application. Note • Press and hold the OK button or Start/Stop button for more than 2 seconds to open the application setting screen.
4.3.2 Selecting the behavior of push scan 4.3.2.1 Performing push scan Note • Register jobs in advance. For details about registering jobs, refer to the Image Capture Plus help. 1 2 3 1. Use or 2. Use or of the cursor button ( ) to select a group. of the cursor button ( ) to select a job. 3. Place the documents on the feed tray. • When [Touch Free Scanning] is selected, scanning will start.
4.3.3 Checking events 4.3.3 Checking events Check the following if an application does not start up after being set by the Scan Button Setting Tool. 1. Display the Scan properties screen. • If you are using Windows 8 / Windows 7: [Control Panel] → [View devices and printers], right-click the scanner icon, and display the [Scan properties] screen. • If you are using Windows Vista: [Control Panel] → [Scanners and Cameras], select the scanner icon, and then click the Properties button.
4.4 Using Control Sheets 4.4 Using Control Sheets Placing a control sheet in the middle of documents lets you change the scanning conditions for pages scanned after the control sheet. Also, you can change the folder used to save the scan data of documents scanned after the control sheet. • Print out control sheets from the included CD-ROM. Documents A Control sheet Code p im S x le Documents B 4.4.
4.4.2 About Printing Control Sheets • For details about control sheets, refer to "Detect Control Sheet" in the Image Capture Plus, TWAIN, or ISIS help. 4.4.2.1 Printing control sheets Note • In order to print control sheets, Adobe Reader must be installed on your computer. • Refer to the instruction manual for your printer for details about changing print settings. 1. Insert the included CD-ROM into the CD/DVD drive on your computer. • The setup window will appear.
5 Clearing Paper Jams 5 Clearing Paper Jams 5.1 Clearing Paper Jams If a paper jam occurs, remove the jammed sheet according to the following procedure. 1. Remove all documents from the exit tray. 2. Close the exit extension trays. 3. Press the ADF door release ( ), and open the ADF door ( ).
5.1 Clearing Paper Jams 4. Remove the jammed document. • If the document is jammed inside the scanner, remove it from the inside of the ADF door as shown in the illustration. • If the document is jammed in the exit area, pull it forward as shown in the illustration.
5.1 Clearing Paper Jams 5. Close the ADF door. • Push both sides of the ADF door down slowly until it clicks into place. Notice • Close the ADF door after confirming that no documents remain inside the unit.
6 Care and Maintenance 6 Care and Maintenance 6.1 Cleaning the Outside of the Scanner Notice • Before moving the unit, be sure to unplug the power cord and USB cable. • Do not use commercially available cleaners, detergent, thinner, or benzine. (Doing so may cause deformation, discoloration or damage.) • Clean the scanner at least once a month. 1. Clean the outside of the scanner with a soft, slightly damp cloth. 2. Remove dirt and dust from the fan exhaust vent with a brush.
6.2 Cleaning the Inside of the Scanner 6.2 Cleaning the Inside of the Scanner Notice • Be sure to disconnect the power cord and USB cable from the unit before cleaning it. • Clean the inside of the scanner when approximately 20,000 sheets have been scanned. The time for cleaning may differ depending on documents you scan. To maintain proper scanning, clean the scanner parts frequently. • Clean the rollers if paper jamming or double feeding occurs frequently.
6.2 Cleaning the Inside of the Scanner 3. Clean the conveyor, sensors, rollers, and scanning glasses. • Clean the parts in the following order: conveyor and scanning glasses, sensors, rollers. • For details about cleaning, refer to the following: – "6.2.1 Cleaning the Conveyor and Scanning Glasses" (page 46) – "6.2.2 Cleaning the Sensors" (page 47) – "6.2.3 Cleaning the Rollers" (page 48) 4. Close the ADF door. • After cleaning, push both sides of the ADF door down slowly until it clicks into place.
6.2.1 Cleaning the Conveyor and Scanning Glasses 6.2.1 Cleaning the Conveyor and Scanning Glasses 1. With a soft and dry cloth, wipe off any dirt on the conveyor ( ) and scanning glasses ( ).
6.2.2 Cleaning the Sensors 6.2.2 Cleaning the Sensors 1. Remove dust from the sensors with a cotton swab.
6.2.3 Cleaning the Rollers 6.2.3 Cleaning the Rollers 1. Use the Roller Cleaning Paper (page 9) to wipe the dirt from the surfaces of all rollers. Direction to wipe rollers Double feed prevention roller, Separation roller Other rollers Notice • After removing the double feed prevention roller, gently wipe dirt from the surface of the roller in the direction indicated by the arrows in the illustration. If you wipe too hard, you may damage or misalign the roller.
6.2.3 Cleaning the Rollers 6.2.3.1 Location of Rollers 1 4 2 3 4 5 3 4 3 Paper feed roller Separation roller Free rollers Conveyor rollers • For details about cleaning the conveyor rollers, see "6.2.4 Cleaning Mode" (page 50).
6.2.4 Cleaning Mode 6.2.4 Cleaning Mode Cleaning Mode can be used to help cleaning the conveyor rollers. During Cleaning Mode, the conveyor rollers rotate a small amount every time the Start/Stop button on the scanner is pressed. So, you do not have to rotate the conveyor rollers by using your fingers in order to clean the entire surface of each roller. Notice • Do not touch the conveyor rollers while they are rotating. • Use Cleaning Mode only to clean the conveyor rollers. 1. Close the ADF door. 2.
6.3 Replacing the Rollers 6.3 Replacing the Rollers As a rough guideline, we recommend to replace the paper feed roller module and double feed prevention roller after scanning 350,000 sheets of paper. ("350,000 sheets" is based on scanning high-quality woodfree paper. Depending on the type of paper and other factors, the actual lifetime for the rollers may be shorter.) In User Utility, you can check the number of sheets that have been scanned. 1.
6.3 Replacing the Rollers 3. Move the lever ( ) of the paper feed roller module in the order indicated by the arrow ( , ), and then pull out the module towards you. 1 2 1 4. Open the "Roller exchange kit (KV-SS063)" (sold separately) and take out the new paper feed roller module.
6.3 Replacing the Rollers 5. Install the new paper feed roller module. • With the lever ( ) of the paper feed roller module lowered, insert both protrusions ( ) into the grooves ( ), and then slowly raise the lever in the direction indicated by the arrow until it clicks into place. 3 2 2 3 2 1 3 Notice • Make sure that the paper feed roller module’s lever is firmly set. If the lever is not firmly set, the lever or the paper feed roller module might become damaged or might not function correctly.
6.3 Replacing the Rollers 6. Use the indents ( ) to pull the double feed prevention roller cover towards you to open it. 1 7. While pulling the tab ( ) in the direction indicated by the arrow, lift the double feed prevention roller ( ) in the direction of the arrow. Then, pull out the right shaft (when facing it) from the notch in the roller mount. 2 1 8. Open the "Roller exchange kit (KV-SS063)" (sold separately) and take out the new double feed prevention roller.
6.3 Replacing the Rollers 9. Install the new double feed prevention roller. • Align the shaft that is shaped as indicated by with the notch in the roller mount ( ), and then insert the shaft in the notch. Push the shaft on the opposite side ( ) until it clicks into place. 2 1 3 2 1 Notice • After you install the double feed prevention roller, make sure that the shaft is inserted into the tab. If the roller is not installed correctly, it may cause double feeding or a paper jam.
6.3 Replacing the Rollers 10. Insert the tab ( ) into the notch as shown in the illustration, and then push the double feed prevention roller cover until it clicks into place to close it. 2 1 1 Notice • Make sure that the double feed prevention roller cover does not stick up. If the double feed prevention roller cover is closed incompletely, damage or paper jams can occur. 11. Close the ADF door. • Push both sides of the ADF door down slowly until it clicks into place. 12.
7 Optional Imprinter Unit 7 Optional Imprinter Unit 7.1 Installing the Imprinter Unit and Ink Cartridge The imprinter unit can be used to print information such as a name, the date and time, or a serial number on the rear side of the document after scanning. Notice • Do not use the imprinter to print on water-repellent documents such as film, coated paper, some kinds of copy paper, etc. These documents repel ink, and the ink may stain the inside of the scanner (for example, the rollers).
7.1 Installing the Imprinter Unit and Ink Cartridge 4. Slide the carriage to one end, and then insert the upper pins to the guides by matching the gloves with the guides. 2 2 1 5. Insert the lower pins to the guides until they are locked.
7.1 Installing the Imprinter Unit and Ink Cartridge 6. Connect the cables. 7. Insert the cables in the clamper.
7.1 Installing the Imprinter Unit and Ink Cartridge 8. Remove the protective sheet. 9. Move the carriage to the cartridge exchange position. 10. Insert the ink cartridge into the carriage.
7.1 Installing the Imprinter Unit and Ink Cartridge 11. Lock the cartridge adjusting lever. 12. Close the imprinter door.
7.2 How to Remove the Ink Cartridge 7.2 How to Remove the Ink Cartridge Remove the old ink cartridge before installing a new ink cartridge. 1. Press and hold the power button for one second or more to turn off the unit’s power. 2. Open the imprinter door. 3. Move the carriage to the ink cartridge exchange position. Notice • Adjust the position following the label on the imprinter unit. 4. Pinch the ink cartridge adjustment lever ( ) and lift it. 1 5. Remove the ink cartridge ( ).
7.3 Printing 7.3 Printing Adjusting the imprinter printing position 1. Move the carriage to the desired printing position, and align the indicator ( ) with the " " mark ( ). • The " " mark indicates the printing position. Printing is not available in any other position. 1 2 Printing Position 97.5 mm (3.8 in.) 83.5 mm (3.3 in.) 66.8 mm (2.6 in.) 66.8 mm (2.6 in.) 56.5 mm (2.2 in.) 56.5 mm (2.2 in.) 45 mm (1.8 in.) 45 mm (1.8 in.) Document size 30.8 mm (1.2 in.) 30.8 mm (1.2 in.) 16.5 mm (0.6 in.
7.4 Cleaning the ink cartridge 7.4 Cleaning the ink cartridge If printing becomes faded, perform the followings. Cleaning by using the User Utility Click the [Clean Imprinter] button on the User Utility program. This will help remove clogging by ejecting ink from the print head. Cleaning the dirt on the print head Wipe and clean the print head with moistened tissue paper. Do not use any material that includes alcohol. (Ex.
8 Appendix 8 Appendix 8.1 Troubleshooting If a problem occurs while the scanner is being used, check the following items and check the scanner status in User Utility. If the unit still malfunctions, turn it OFF, unplug the power cord and call for service. Symptom The LED (Green) does not light when the unit’s power is turned ON. The computer does not recognize the scanner. The scanner is not functioning correctly. Scan speed is slow.
8.1 Troubleshooting Symptom Remedy The paper feed roller, separation roller, or double feed prevention roller is dirty. Clean the paper feed roller, separation roller, or double feed prevention roller. (page 48) The double feed detectors are dirty. Clean the double feed detectors. (page 47) The paper feed roller, separation roller, or double feed prevention roller has become worn down. Replace the paper feed roller module, and double feed prevention roller.
8.1 Troubleshooting Symptom The scanning density is uneven. Possible Cause Remedy The scanning glasses are dirty. Clean the conveyor and scanning glasses. (page 46) The settings of the computer monitor are wrong. Adjust the computer monitor settings. Depending on the documents scanned, the color of documents may not be scanned properly. For example, the color of a highlighter pen may be scanned lighter than it appears.
8.2 Error Messages 8.2 Error Messages Error codes corresponding to the scanner status are displayed on the LCD. Also, when the scanner is connected to a computer, simple messages are displayed on the LCD. For details about the error codes and messages, check in User Utility. Error Code Remedy The paper has jammed in the feed tray area. Open the ADF door, and remove the paper. The sensors are dirty. Clean the sensors. A paper jam has occurred in the unit. Open the ADF door, and remove the paper.
8.3 Uninstalling the Software 8.3 Uninstalling the Software If you want to remove the software that is installed on your computer, follow the procedure below to uninstall them. 1. In [Control Panel], open [Uninstall a program]. • In Windows XP, select [Add or Remove Programs]. 2. Uninstall the following software programs. Program Name Publisher Image Capture Plus Panasonic System Networks Co., Ltd. Scan Button Setting Tool Panasonic System Networks Co., Ltd. IDREngine Panasonic System Networks Co.
8.4 Repacking Instructions 8.4 Repacking Instructions It is highly recommended that you keep the original carton and ALL packing materials. If you need to transport or ship the scanner, please follow these instructions. Note • Improper repacking of the scanner may result in a service charge to repair the scanner. • Please use the original carton and all of the original packing materials. • The scanner should be handled in the correct (horizontal) position.
8.5 Specifications 8.5 Specifications Scanning item KV-S2087 Scanning face Duplex Scanning method Scanning speed Color CIS (600 dpi) *1 Simplex 85 pages/min. Duplex 170 images/min. • A4 / Letter • Binary / color • 200 dpi, 300 dpi 100 – 600 dpi (1 dpi step) 1,200 dpi (Interpolated) Optical: 300 dpi / 600 dpi (Automatic switch) Scanning resolution Width Length 48 mm – 216 mm (1.9 in. – 8.5 in.) *3 Automatic feeding: 70 mm – 356 mm (2.75 in. – 14 in.) Manual feeding: 70 mm – unlimited (2.
8.5 Specifications *3 *4 *5 Using "Long Paper", you can scan a long document to a series of split scanned images. For details about "Long Paper", refer to the Image Capture Plus, TWAIN, or ISIS help. Portrait orientation only For details, see "6.3 Replacing the Rollers". • dpi: dots per inch • "Weight in pounds" of paper represents the weight of 500 (432 mm × 559 mm [17 in. × 22 in.]) sheets. General Item External dimensions (Width × Depth × Height) 350 × 319 × 242 mm (13.78 × 12.56 × 9.53 in.
© Panasonic System Networks Co., Ltd.
