Quick Reference Guide Digital Proprietary Telephone Model No. KX-DT333/KX-DT343/KX-DT346 Thank you for purchasing a Digital Proprietary Telephone (DPT). Please read this manual carefully before using this product and save this manual for future use. For more details, please refer to the manuals of the PBX.
This unit supports the following optional devices and features: KX-DT333 KX-DT343 KX-DT346 Features Display 3-Line 3-Line 6-Line Flexible Buttons 24 24 24 LCD Backlight Q Q Options KX-NT303 Add-on 12 Key Module Q Q KX-NT307 (PSLP1528) Bluetooth® Module*1 *2 *3 KX-DT301 USB Module*3 KX-DT390 DSS Console (with 60 keys)*2 Q Q Q Q Q Q Q Q: Available *1 The availability of the Bluetooth Module depends on the software version of the connected PBX. Consult your dealer for more details.
Location of Controls Location of Controls V U A T B C D E F S G H I J R Q K L M N O P A LCD (Liquid Crystal Display) B PAUSE: Used to insert a pause when storing a telephone number. This button is also used for programming this unit. C FWD/DND (Call Forwarding/ Do Not Disturb): Used to set Call Forwarding or Do Not Disturb on your extension. D CONF (Conference): Used to establish a multiple party conversation.
Location of Controls H TRANSFER: Used to transfer a call to another party. I REDIAL: Used to redial the last dialed number. J MESSAGE: Used to leave a message waiting indication or call back the party who left the message waiting indication. K Headset Jack L FLASH/RECALL: Used to disconnect the current call and make another call without hanging up. M HOLD: Used to place a call on hold. N SP-PHONE (Speakerphone): Used for performing hands-free operations. O ENTER: Used to assign the selected item.
Settings Settings Speaker volume While in a hands-free conversation Handset/Headset While using the handset or headset volume*1 Ringer volume While on-hook or receiving a call Press Up to increase or Down to decrease the volume. LCD Contrast While on-hook PAUSE PAUSE Ring Tone PAUSE LCD Backlight*2 (CO) PAUSE OR INTERCOM OR AUTO DIAL Press 2 times.
Features List Features List Icon Meanings (CO) = Flexible button = Off-hook = Feature number = Talk = On-hook C. Tone = Confirmation Tone Making Calls Calling To an extension To an outside party extension no. (CO) outside phone no. Redial REDIAL Quick Dialing quick dialing no. One-touch Dialing To store AUTO DIAL PAUSE (CO) desired no.* (max. 32 digits) * Enter CO line access number before outside phone number.
Features List System Speed Dialing To dial AUTO DIAL system speed dialing no. (3 digits) STORE Doorphone Call doorphone no. (2 digits) C. Tone During a Conversation Call Hold To hold To retrieve a call at the holding extension HOLD (CO) C. Tone / INTERCOM To retrieve an outside call from another extension (CO) Call Transfer extension no. TRANSFER C. Tone (CO) To an extension outside phone no.
Features List Setting the Telephone According to Your Needs Do Not Disturb Both Calls Set Outside Calls Cancel C. Tone Intercom Calls Timed Reminder To set 12 H hour/minute (4 digits) 24 H hour/minute (4 digits) AM PM Once Daily C. Tone To cancel To stop or answer the ring back INTERCOM / C. Tone Before Leaving Your Desk Call Forwarding Both Calls Outside Calls Intercom Calls All calls extension no. Busy No answer Busy/ No answer OR CO line access no. outside phone no. C.
Features List Making Use of the Voice Mail Service Listening to a message From your own extension KX-TVA series Listen to Message VPS extension no. Deliver Message Mailbox Password* Mailbox Management * If you have no password, you can skip the last step. Automated Attendant Note: VPS = Voice Processing System Message Notification Other Features From someone else’s extension End Call VPS extension no. KX-TVS series Listen to Message Deliver Message mailbox no.
Features List During playback Repeat Voice Guidance Exit • Consult your dealer for more details regarding feature numbers. • It is possible to assign flexible buttons as feature buttons. • Control panel/button names and descriptions can be found in "Location of Controls" on page 3.
Accessing Features Using the Display Accessing Features Using the Display Table 1 (Standard mode) Times Buttons ! ? " 1 A B C a b c 2 D E F d e f 3 G H I g h i 4 J K L j k l 5 M N O m n o 6 P Q R S p q r T U V t u v 8 W X Y Z w x y (space) .
Operation Board Angle Adjustment Operation Board Angle Adjustment The angle of the operation board can be set to one of eight angles (level 1 = 0°, level 8 = 45°). 8 76 5 4 3 2 1 CAUTION: Hold the operation board until the operation board is secured at the desired angle. Make sure you do not pinch your fingers when raising or lowering the operation board. To raise: Gently lift the operation board one level at a time. To lower: Raise the operation board to level 8.
Connection Connection Connect to: a digital proprietary telephone — Digital XDP connection a single line telephone — XDP or parallel connection The telephone line cord (included) Connect to a PBX. Clamp Headset Recommended: KX-TCA86, KX-TCA91, KX-TCA92 Do not use a KX-T7090 headset. • Consult your dealer for more details about XDP and Digital XDP. CAUTION: When connecting a headset • Ensure that the headset cord is wound around the hook to prevent damage to the connector.
Installing KX-DT301/KX-NT303 Installing KX-DT301/KX-NT303 CAUTION: • To prevent damage to the telephone, be sure to unplug the extension line before you set up or remove the KX-DT301 (USB Module) or the KX-NT303 (Add-on 12 Key Module). • Connect the KX-NT303 first when installing both the KX-DT301 and the KX-NT303. KX-NT303 The Add-on 12 Key Module allows 12 additional flexible buttons to be added to this unit.
Installing KX-DT301/KX-NT303 KX-DT301 The USB Module can be connected between the DPT and the personal computer through USB interface to implement personal CTI (Computer Telephony Integration). 1. Open the cover. 2. Plug the flat cable into the connector as shown. 3. Close the cover. 4. Connect the USB cable to the USB port. Connect to a PC • Ensure that the USB cable goes through the cable guide. • Please use a USB cable shorter than 3 m (9 ft 10 in).
Installing KX-DT301/KX-NT303 5. Insert the protrusions on the KX-DT301 into the 2 holes in the unit. 6. Attach the KX-DT301 to your unit with the screws (included with KX-DT301). 7. Install the USB driver. Refer to Installation Manual on the CD-ROM included with KXDT301.
Wall Mounting Wall Mounting 1. Remove the wall mounting adaptor from the unit as shown. 2. Set the operation board to level 1, then connect and secure the telephone line cords. • The cords can also be run from the top of the unit (page 13). 3. Attach the wall mounting adaptor as shown. Slide the wall mounting adaptor up to this point. • Make sure the cords are not pinched by the wall mounting adaptor.
Important Information Important Information When using KX-DT300 series DPTs, keep the following conditions in mind. • If you are having problems making calls, unplug the extension line and connect a known working telephone. If the known working telephone operates properly, have the defective telephone repaired by an authorized Panasonic factory service center. If the known working telephone does not operate properly, check the PBX and the internal extension wiring. • Wipe the unit with a soft cloth.
Important Information WARNING: TO PREVENT POSSIBLE FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. THIS HANDSET EARPIECE IS MAGNETIZED AND MAY RETAIN SMALL FERROUS OBJECTS. THE USE OF EXCESSIVE SOUND VOLUME THROUGH EARPHONES, HEADPHONES, OR HEADSETS MAY CAUSE HEARING LOSS. DISCONNECT THE TELEPHONE LINE CORD FROM THIS PRODUCT IF THIS PRODUCT EMITS SMOKE, AN ABNORMAL SMELL OR MAKES UNUSUAL NOISE. THESE CONDITIONS CAN CAUSE FIRE OR ELECTRIC SHOCK.
Important Information Important Safety Instructions When using this unit, basic safety precautions, including those below, should always be followed to reduce the risk of fire, electric shock and injury to persons. 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on this unit. 3. Unplug this unit from the main unit before cleaning. Do not use liquid or aerosol cleaners. Clean with a soft cloth. 4.
Important Information FCC and Other Information F.C.C. REQUIREMENTS AND RELEVANT INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Important Information This unit features a Bluetooth Module slot that can be used to wirelessly connect a Bluetooth headset to the unit. Radio Frequency Exposure Requirements (When an optional Bluetooth Module is installed) This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply with FCC RF exposure requirements, it must be installed and operated in accordance with provided instructions.
wall One screw here Make sure to set the print size to correspond with the size of this page. If the dimensions of the paper output still deviate slightly from the measurements indicated here, use the measurements indicated here. for base unit 83 mm (3-1/4 in) 100 mm (3-15/16 in) WALL MOUNTING TEMPLATE 1. Drive the screws into the wall as indicated. 2. Hook the unit onto the screw heads.
Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way Secaucus, New Jersey 07094 http://www.panasonic.com/csd Copyright: This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic Communications Co., Ltd. © Panasonic Communications Co., Ltd.
