Operation Manual

2.14.2 DI and DO
Connect DI or DO devices to the terminal block of the KX-NTV150/KX-NTV160, the KX-NTV150/
KX-NTV160 will automatically detect the current connection state as pulled-high or pulled-low. You may then
define the triggering condition.
• Digital input
– Normal status: Select "High" or "Low" to define the "Normal status" for the digital input.
– Current status: Indicate the current status ("High" or "Low") on the digital input.
• Digital output
– Current status: Indicate the current status on the digital output, and indicate "Open" normally.
– Make time: Set the keeping time after the digital output is triggered. For example, if "Make time" is set
to 5 seconds, when Digital output is triggered, it will keep "Grounded" status for 5 seconds.
118 User’s Manual
2 Software