Operation Manual

contrary, if you choose Deny, those clients whose IP addresses are on the Access List below will not be allowed
to access the KX-NTV150/KX-NTV160, and the others can access.
Then you can add a rule to the following Access List.
Please select the Enable access list filtering checkbox for your configuration to take effect.
There are three types of rules:
Single: This rule allows the user to add an IP address to the Allowed/Denied list.
For example:
Network: This rule allows the user to assign a network address and corresponding subnet mask to the
Allow/Deny List. The address and network mask are written in CIDR format.
For example:
IP address range 192.168.2.x will be blocked
Range: This rule allows the user to assign a range of IP addresses to the Allow/Deny List.
Note
• This rule is only applied to IPv4.
98 User’s Manual
2 Software