Instruction Manual

ManualsBrandsPanasonic ManualsphonesKX-T206

System Programming

System Speed Dialing Number Set

Description

Used to program System Speed Dial numbers. These numbers are available to all exten

sion users. There are 80 numbers from 00 through 79.

Condition

• A maximum of 32 digit numbers can be stored.

• You must store an automatic line access code (0 or 9), or an individual line code (81 or 82)

first. The automatic line access code is assigned in “#52 CO Line Access Number

Selection”.

• If you store a pause, press *.

Input Format

Explanation

• [AA]=Speed dial number: 00 through 79

^ (oj [AA] [Phone No.] [tt

• Phone number: 32 digits max.

Default Not stored

Dial Type Selection

Description

Assigns the Dial Type (tone or pulse) to CO line.

Input Format

U 0 0 [A] [B]

Explanation

• [A]= 1: COl/ 2: C02 • [B]= 0: PULSE/ 1: TONE

Default Both COs- 0: PULSE

Outgoing Permitted COl Assignment (Day/Night)

Description

Determines the extensions which can have access to CO line 1 in both day and night

modes. The extension users can make outgoing CO calls if their extensions are assigned as

“ENABLE”.

Input Format

tt 0 2 (for day) /72 (for night) [A] [B]

Explanation

• [A]= 1 through 6 (corresponding to extension no. 21 through 26)

• [B]= 0: DISABLE/ 1: ENABLE

Default All extensions- 1: ENABLE

Summary of content (9 pages)

PAGE 1
System Programming System Speed Dialing Number Set Description Used to program System Speed Dial numbers. These numbers are available to all exten sion users. There are 80 numbers from 00 through 79. Condition • A maximum of 32 digit numbers can be stored. • You must store an automatic line access code (0 or 9), or an individual line code (81 or 82) first. The automatic line access code is assigned in “#52 CO Line Access Number Selection”. • If you store a pause, press *.
PAGE 2
System Programming Outgoing Permitted C02 Assignment (Day/Night) Description Determines the extensions which can have access to CO line 2 in both day and night modes. The extension users can make outgoing CO calls if their extensions are assigned as “ENABLE”. Input Format ^ Explanation 0 3 (for day)/ 7 3 (for night) [A] [B] • [A]= 1 through 6 (corresponding to extension no.
PAGE 3
System Programming Doorphone Assignment (Day/Night) Description Assigns the extensions which will ring when a doorphone call is received and enables to call the doorphone in both day and night modes. Condition • All extensions must be assigned as “0: DISABLE”, if you do not connect a doorphone to the system. Input Format g] [g] Explanation • [A]= 1 through 6 (corresponding to extension no.
PAGE 4
System Programming TRS Denied Code (CLASS 2,3) Description Allows you to specify the numbers which are toll-restricted for TRS Class 2 and Class 3. Condition • The character “ ^ ” can be any number. Input Format Explanation g[oJ[8j [A] [Denied code No.] [tt • [A]= Code No.: 0 through 9 1 digit • Denied code number: 7 digits, * Default All codes- Not stored TRS Denied Code (CLASS 3) Description Allows you to specify the numbers which are toll-restricted for TRS Class 3.
PAGE 5
System Programming OGM Play Description Confirms the outgoing message recorded in the OGM Recording program. Condition • If you perform programming with a PT, the message “PLAYBACK” will be displayed on its panel. Input Format SEE Fax Connection Description Allows the system to detect the CNG tone from a facsimile. If it is set to “ENABLE”, extension 26 will receive fax transmission data. Condition The optional DISA/FAX Detect card (KX-T20691) should be installed.
PAGE 6
System Programming COl Delayed Ringing Assignment Description Assigns delayed ringing to extensions when a call from CO line 1 is received. Condition • The number of delayed rings is assigned by the “#15 Delayed Ringing Count Selection’ program. • This feature is not available for the calls sent by the DISA feature. Input Format @[T]S[A][B] Explanation • [A]= 1 through 6 (corresponding to extension no.
PAGE 7
System Programming Day/Night Switching Mode Description Assigns automatic or manual day/night mode. Condition • If automatic switching mode is assigned, day/night mode is switched at the time programmed in “#71 Day/Night Starting Time”. Input Format WlTjlOj [A] Explanation • [A]= 0: Manual/1; Automatic Default 0: Manual Day/Night Starting Time Description Sets the starting time when automatic day/night mode is programmed in the “#70 Day/ Night Switching Mode” program.
PAGE 8
System Programming Other Programs Call Blocking Mode Setting Paralleled Telephone Connection Assigns whether or not to prevent the DTMF signal from being sent to a CO line. This feature is useful when a Central Office in your country accepts both tone and pulse signals or when you have access to your host PBX with a pulse dial. Input Format: #20 [A] • [A]=0; DISABLE (default)/ 1: ENABLE Assigns whether extension 21 will be connected in parallel with a single line telephone or not.
PAGE 9
System Programming Other Programs (continued) • DISA Ringing Time Assignment Sets the time to forward a call sent by the DISA feature to other extensions. If the call is not answered by the designated extension within the programmed time, the call is forwarded to extensions which are not assigned as “DIS ABLE” in the #04/#74 COl Ringing Assignment (Day/Night) and #05/#75 C02 Ringing Assign ment (Day/Night).