Manualshelf

Operation Manual

ManualsBrandsPanasonic ManualsTelephonesKX-TCA185
21222324252627282930
R Ringer Volume
R Ring On Charger
R Auto Answer
R Key Tone
R Vibrate (Vib.&Ring)
To set or cancel
To set or cancel Silent Mode, press and hold for more than 2 seconds.
Note
R If you set the handset on the charger during Silent Mode, the handset will not vibrate.
*1
R When Silent Mode is set, the low battery alarm will not be heard in standby mode.
R When Silent Mode is set, confirmation sounds for setting the ring pattern or ring volume will not play.
*1 Please note that if you set the handset on the charger while receiving an incoming call, vibration will
stop. Once the vibration stops, the handset will not vibrate again for that call, even if the handset is
lifted up again. (If "Quick Answer" is set, lifting up the handset will answer the call.)
Noise Reduction
When Noise Reduction is enabled, environmental noise is reduced to improve and maintain sound
quality for the other party in the conversation. Receiver volume is also increased according to the level of
environmental noise.
It is useful in noisy environments such as warehouses, manufacturing plants, restaurants, and garages.
Noise Reduction can be toggled on/off during a call.
Enabling or disabling Noise Reduction
1. Press
or the [CENTRE] navigation key.
2. Select "Setting Handset" by pressing the arrow keys, and then press .
3. Select "Talk Option" by pressing the arrow keys, and then press .
4. Press [
] or [ ] to select "Noise Reduction", and then press .
5. Press [ ] or [ ] to select "On" or "Off", and then press .
Temporarily enabling or disabling Noise Reduction during a call
You can enable or disable Noise Reduction during a call by doing either of the following:
a. Press or the [CENTRE] navigation key, then select "Noise Reduction" by pressing the arrow
keys, and then press .
or
b. Press . To display the soft key, edit the displayed soft keys. See "Key Option" on
Page 67.
Note
R Noise Reduction can be used only in Receiver mode. It cannot be used in Hands-free mode. If
Hands-free mode is enabled during a call while Noise Reduction is enabled, Noise Reduction will be
temporarily disabled.
22
Before Operating the Telephone