Operation Manual

Soft Keys
Icons and information shown on the display will vary depending on the context. To select an item shown
on the display, press the corresponding soft key.
Opens the Phonebook.
Pressing this key for more than 2
seconds locks the Phonebook.
Inserts a dialling pause.
Displayed when in Phonebook Lock.
Pressing this key and then entering the
password (default: not registered),
unlocks the Phonebook temporarily.
Pressing for more than 2 seconds, then
entering the password (default: not
registered), unlocks the Phonebook. If
no password has been set, you cannot
lock the Phonebook.
Clears digits or characters.
Stores a new item in the Phonebook. Turns the microphone mute feature on
or off during a conversation. Flashes
when Mic Mute is on.
Opens the PBX System Phonebook. Turns the ringer off.
Opens the PBX Extension Phonebook. Opens the main menu. Pressing this key
for more than 2 seconds locks all keys.
Displays the caller information stored in
the Handset Phonebook while receiving
a call.
Returns to the previous display.
Displays the caller information stored in
the system while receiving a call.
Opens the list menu (edit/delete in the
Phonebook, etc.).
Establishes a multiple-party
conversation (Conference).
Confirms the entry.
Searches for an item in the Phonebook
alphabetically.
Displayed when in Key Lock mode.
Pressing this key for more than 2
seconds unlocks the keys.
Displayed when in Alphabetic character
entry mode. Pressing this key switches
to Numeric character entry mode.
Advances to the next display.
Displayed when in Numeric character
entry mode.
Pressing this key switches to Greek
character entry mode.
Used to clear the Memo Alarm display
setting, or enter an "X (
)" when
storing the Line Access CD.
Displayed when in Greek character
entry mode. Pressing this key switches
to Special character (Extended 1) entry
mode.
Displayed when it is possible to use an
arrow key to make a selection.
Displayed when in Special character
(Extended 1) entry mode.
Pressing this key switches to Special
character (Extended 2) character entry
mode.
Displayed when the corresponding soft
key has no function.
26
Before Operating the Telephone