Operation Manual

Bluetooth (KX-TCA285/KX-TCA385 only)

You can use Bluetooth to connect to a Bluetooth wireless headset and transfer phonebook data from a

cell phone.

The following Bluetooth headsets can be used with this unit. (Not all operations with the headsets can be

guaranteed.)

– Selected Plantronics

-brand headsets

– Selected GN Netcom Jabra

-brand headsets

Turning Bluetooth On or Off

Before using Bluetooth to connect to a wireless Bluetooth headset or to a cell phone, Bluetooth must be

set to "On" in the handset settings.

1. Press or the [CENTRE] navigation key.

2. Select "Setting Handset" by pressing the arrow keys, and then press .

3. Press [

] or [ ] to select "Bluetooth Option", and then press .

4. Press [ ] or [ ] to select "On/Off", and then press .

5. Press [ ] or [ ] to select "On" or "Off", and then press .

Setting and Changing the Bluetooth PIN Number

Before using Bluetooth to connect to a cell phone, you must set the Bluetooth PIN number in the handset

settings.

1. Press

or the [CENTRE] navigation key.

2. Select "Setting Handset" by pressing the arrow keys, and then press

3. Press [ ] or [ ] to select "Bluetooth Option", and then press .

4. Press [ ] or [ ] to select "Cell Phone", and then press .

5. Press [ ] or [ ] to select "Change BT PIN", and then press .

6. Enter the old PIN number.

7. Enter a PIN number (4 digits), and then press .

8. Re-enter the same PIN number as in step 7, and then press

*1 If a PIN number has not been set previously, skip this step and continue to step 7.

Note

R The valid digits are 0–9.

Registering and Deregistering the Bluetooth Headset

You can use a wireless Bluetooth headset with a handset. Before using a Bluetooth headset, you must

Registering a Bluetooth Headset

Note

R Perform any procedures on the headset necessary for registering it before configuring the settings on

the handset. Otherwise, the Bluetooth headset may not be registered.

Feature Operations