Cordless Telephone User Manual

Before Requesting Help

Problem

The unit does not work.

You cannot program items such as the

time/day adjustment.

The battery strength is not displayed

correctly.

“ ” flashes or the unit beeps every

15 seconds.

You charged the batteries fully, but

“ ” flashes.

Remedy

•Turn the power ON (p. 12).

•Check the settings (p. 54).

• Charge the batteries fully (p. 11).

• Clean the charge contacts and charge again (p. 11).

• Unplug the AC adaptor and turn the power OFF to

reset. Plug in the AC adaptor and turn the power ON.

Then try again.

• The handset has been cancelled or has not been

registered. Register the handset (p. 80).

• Re-install the handset batteries and try again.

• Programming is not possible while the unit is in the

talk or intercom mode.

• Move closer to the base unit.

• Check that the battery type selection is correct

(p. 52).

• Charge the batteries fully (p. 11).

• Clean the charge contacts and charge again (p. 11).

• Install new batteries (p. 52, 86).

General

KX-TCD725EM-5(86~100) 01.10.24 14:40 Page 94