Operating Instructions Cordless Telephone with Digital Answering Machine Model No. KX-TGE432 KX-TGE433 KX-TG3634 KX-TGE445 KX-TG3640 KX-TG3645 Model shown is KX-TGE432. Before initial use, see “Getting Started” on page 10. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. Consulte “Guía Rápida Española”, página 60. For assistance, visit our Web site: http://shop.panasonic.com/support for customers in the U.S.A.
Table of Contents Introduction Answering System Model composition .......................................3 Accessory information ..................................3 Answering system ......................................41 Turning the answering system on/off .........41 Greeting message ......................................41 Listening to messages ...............................42 Advanced new message alerting features ......................................................43 Remote operation ...........
Introduction Model composition n KX-TGE430 series n KX-TGE440 series R Model shown is KX-TGE432. R Model shown is KX-TGE445. Base unit Handset Part No. Part No. KX-TGE432 KX-TGE430 KX-TGEA40 2 KX-TGE433 KX-TGE430 KX-TGEA40 3 KX-TG3634 KX-TGE430 KX-TGEA40 4 KX-TGE445 KX-TGE440 KX-TGEA40 5 KX-TG3640 KX-TGE440 KX-TGEA40 1 KX-TG3645 KX-TGE440 KX-TGEA40 5 Series Model No. KX-TGE430 series KX-TGE440 series Quantity Accessory information Supplied accessories No.
Introduction *2 *3 *4 *5 *6 *7 *8 KX-TGE432 KX-TGE433 KX-TG3634 KX-TGE445/KX-TG3645 PQJA10075Y (Black cord), PQJA10075Z (Transparent cord) See page 4 for replacement battery information. The handset cover comes attached to the handset. B A C D E F G Additional/replacement accessories Please contact your nearest Panasonic dealer for sales information (page 65). Accessory item Model number/Specifications Rechargeable batteries HHR-4DPA*1 R To order, please visit http://shop.panasonic.
Introduction Expanding your phone system Handset (optional): KX-TGEA40 You can expand your phone system by registering optional handsets (6 max.) to a single base unit. R Optional handsets may be a different color from that of the supplied handsets. For assistance, please visit http://shop.panasonic.com/support TGE43xUS(en)_1112_ver021.
Important Information R Do not allow the AC adaptor or telephone line cord to be excessively pulled, bent or placed under heavy objects. For your safety To prevent severe injury and loss of life/ property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R Use only the power source marked on the product. R Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock.
Important Information R This product is unable to make calls when: – the handset batteries need recharging or have failed. – there is a power failure. Battery R We recommend using the batteries noted on page 4. USE ONLY rechargeable Ni-MH batteries AAA (R03) size. R Do not mix old and new batteries. R Do not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed.
Important Information R If the reception for a base unit location is not satisfactory, move the base unit to another location for better reception. Environment R Keep the product away from electrical noise generating devices, such as fluorescent lamps and motors. R The product should be kept free from excessive smoke, dust, high temperature, and vibration. R The product should not be exposed to direct sunlight. R Do not place heavy objects on top of the product.
Important Information Specifications R Standard: DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0) R Frequency range: 1.92 GHz to 1.93 GHz R RF transmission power: 115 mW (max.) R Power source: 120 V AC, 60 Hz R Power consumption: Base unit: Standby: Approx. 1.0 W Maximum: Approx. 4.3 W Charger: Standby: Approx. 0.1 W Maximum: Approx. 1.8 W R Operating conditions: 0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 % relative air humidity (dry) For assistance, please visit http://shop.panasonic.
Getting Started n Charger Connect the AC adaptor to the power outlet. Setting up Connections n Base unit Connect the AC adaptor to the unit by pressing the plug firmly. Fasten the cord by hooking it. Connect the AC adaptor to the power outlet. Connect the telephone line cord to the unit, then to the single-line telephone jack (RJ11C) until you hear a click. A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service. Note: R Use only the supplied Panasonic AC adaptor PNLV226.
Getting Started Battery level Battery charging Charge for about 7 hours. R Confirm “Charging” is displayed (1). R When the batteries are fully charged, “Fully charged” is displayed. Icon Battery level High Medium 1 Low Needs charging. Empty Panasonic Ni-MH battery performance (supplied batteries) Operation 12 hours max.*1 Not in use (standby) 8 days max.*1 *1 Note when setting up Note for connections R The AC adaptor must remain connected at all times.
Getting Started Controls Handset B A K L C D M E F G N H I J Ringer indicator Message indicator Belt clip holes Speaker MjN/MkN (VOL.: Volume up/down) M N (TALK) Dial keypad (*: TONE) Headset jack MZN (SP-PHONE: Speakerphone) MFLASHNMCALL WAITN Microphone Receiver Display MOFFN ( ) MCALL BLOCKN ( ) Charge contacts n Control type Soft keys By pressing a soft key, you can select the feature shown directly above it on the display.
Getting Started n KX-TGE440 series: page 3 Base unit n KX-TGE430 series: page 3 B C D A C E D G E A F H I B JK L F G H I JK Charge contacts Speaker MLOCATES CELLN MHANDSET LOCATORN MjN/MkN (VOL.
Getting Started Item Meaning Out of base unit range The line is in use. R When flashing: The call is put on hold. R When flashing rapidly: An incoming call is now being received. Language settings Display language 1 2 MMENUN#110 MbN: Select the desired setting. a MSAVEN a MOFFN Eco mode is on. (page 11) Noise reduction is set. (page 18) Equalizer is set. (page 18) Z Speakerphone is on. (page 16) Ringer volume is off.
Getting Started Recording your greeting message You can record your own greeting message instead of using a pre-recorded greeting message. See page 41 for details. 1 2 3 MMENUN#302 MbN: “Yes” a MSELECTN Record a greeting message. a MSTOPN a MOFFN Other settings Dialing mode If you cannot make calls, change this setting according to your telephone line service. The default setting is “Tone”. “Tone”: For tone dial service. “Pulse”: For rotary/pulse dial service.
Making/Answering Calls 4 Making calls Using the handset 1 Lift the handset and then dial the phone number. R To correct a digit, press MCLEARN. 2 N to make the call. Press M R To make the call using the speakerphone, press MZN. 3 When you finish talking, press MOFFN or place the handset on the base unit or charger. Note: R To switch to the speaker, press MZN. To switch back to the receiver, press MZN/ N. M R In step 1, you can store the dialed phone number to the phonebook by pressing MSAVEN.
Making/Answering Calls Answering calls Useful features during a call Using the handset Hold When a call is being received, the ringer indicator flashes rapidly. 1 Lift the handset and then press M M N when the unit rings. 2 When you finish talking, press MOFFN or place the handset on the base unit or charger. Any key answer: You can answer the call by pressing any dial key. Auto talk: You can answer calls simply by lifting the handset (page 32).
Making/Answering Calls Flash Handset clarity booster Handset / Base unit*1 *1 KX-TGE440 series: page 3 MFLASHN allows you to use the special features of your host PBX such as transferring an extension call, or accessing optional telephone services. Note: R To change the flash time, see page 32. For call waiting or Call Waiting Caller ID service users To use call waiting or Call Waiting Caller ID, you must first subscribe with your phone service provider.
Making/Answering Calls R To leave the conference, press MOFFN. The other 2 parties can continue the conversation. R To put the outside call on hold: MMENUN a MbN: “Hold” a MSELECTN To resume the conference: MMENUN a MbN: “Conference” a MSELECTN R To cancel the conference: MMENUN a MbN: “Stop conference” a MSELECTN You can continue the conversation with the outside caller. Call share You can join an existing outside call. Handset To join the conversation, press M N when the other unit is on an outside call.
Making/Answering Calls Handset locator You can locate a misplaced handset by paging it. 1 Base unit: Press MLOCATORN or MHANDSET LOCATORN. R All registered handsets beep for 1 minute. 2 To stop paging: Base unit: Press MLOCATORN or MHANDSET LOCATORN. Handset: n KX-TGE430 series: page 3 Press MOFFN. n KX-TGE440 series: page 3 N, then press MOFFN.
Making/Answering Calls 2 MbN: Select the desired unit or “Voice paging”. a MSELECTN R If you select “Voice paging”, speak into the microphone after the beep. Your voice will be heard using the speakers of the base unit*1 and all handsets, until a paged party answers your page or until you press MOFFN. After the other party answers, the speakerphone mode is turned on. Turning auto intercom on/off When you finish talking, press MOFFN.
Making/Answering Calls Panasonic Ni-MH battery performance (supplied batteries) during power backup mode When the batteries are fully charged, operating time of the handset in power backup mode varies depending on usage. – Continuous use of the handset in power backup mode: 1.5 hours max. – Continuous use of the handset other than a handset in power backup mode: 2 hours max. – Not in use in power backup mode: 2 hours max.
Call Block Call block You can press the MCALL BLOCKN button in the following situations to disconnect the current call and add a phone number to the call block list: – when an incoming call is being received – when an incoming call is being recorded by the answering system – when talking on an outside call Once a phone number has been added to the call block list, the unit will block calls from that phone number in the future. 1 Press MCALL BLOCKN under the situations shown above.
Call Block Storing a range of number 3 1 2 4 3 4 MCALL BLOCKN MbN: “Block range of numbers” a MSELECTN MMENUN a MbN: “Add” a MSELECTN Enter the desired number (2-8 digits). a MSAVEN a MOFFN Blocking incoming calls that have no phone number You can block calls when no phone number is provided, such as private callers or out of area calls. 1 2 3 MCALL BLOCKN MbN: “Block unknown CID” a MSELECTN To edit a number: MEDITN a Edit the number.
Phonebook character is fixed and the cursor moves to the next space. Phonebook You can add 100 names (16 characters max.) and phone numbers (24 digits max.) to the phonebook, and assign each phonebook entry to the desired group (page 25). Important: R All entries can be shared by any registered handset. Adding phonebook entries 1 2 3 4 5 MFN W a MMENUN MbN: “Add new entry” a MSELECTN Enter the party’s name. a MOKN Enter the party’s phone number. a MOKN MbN: Select the desired group.
Phonebook Changing group names/setting ringer ID The default group name is “Group 1” to “Group 9”. 1 2 3 4 5 3 26 Erasing entries Erasing an entry MbN: “Group” a MSELECTN 1 2 3 MbN: Select the desired group. a MSELECTN To change group names MbN: “Group name” a MSELECTN a Edit the name (10 characters max.). a MSAVEN To set group ringer tone MbN: Select the current setting of the group ringer tone. a MSELECTN a MbN: Select the desired ringer tone.
Phonebook Viewing an entry/Making a call Speed dial You can assign 1 phone number to each of the dial keys (1 to 9) on the handset. 1 Press and hold the desired speed dial key (1 to 9). 2 To make a call, press M N. Adding phone numbers to speed dial keys n By entering phone numbers: 1 Press and hold the desired speed dial key (1 to 9). a MADDN 2 3 4 MbN: “Manual” a MSELECTN Enter the party’s name (16 characters max.). a MOKN Enter the party’s phone number (24 digits max.).
Programming Menu list To access the features, there are 2 methods. n Scrolling through the display menus 1 MMENUN 2 3 4 Press MCN or MDN to select the desired main menu. a MSELECTN Press MCN or MDN to select the desired item from the next sub-menus. a MSELECTN Press MCN or MDN to select the desired setting. a MSAVEN n Using the direct command code 1 MMENUN a Enter the desired code. Example: Press MMENUN#101. 2 Select the desired setting. a MSAVEN Note: R To exit the operation, press MOFFN.
Programming Sub-menu 1 Sub-menu 2 Settings Code New message alert*1 Outgoing call – On/Off On #338 43 Outgoing call – Notification to Settings Outgoing call – Remote code Activate Base unit beep On #339 43 Ring count*1 Toll saver 2-7 rings <4 rings> #211 46 Recording time*1 <3 min> 1 min Greeting only*2 #305 46 Remote code*1 <111> #306 45 Screen call – Handset Off #310 46 Screen call – Base unit*1, *3 Off #G310 46 Answer on*1 Answer of
Programming Main menu: “Speed dial” Operation Code Viewing the speed dial entry.
Programming Sub-menu 1 Sub-menu 2 Settings Code Key detector setting*7 – 1: Add new device (for Detector1)*8 – 2: Add new device (for Detector2) – 3: Add new device (for Detector3) – 4: Add new device (for Detector4) Change name*1 Detector1 #6561 Detector2*9 #6562*9 Detector3*9 #6563*9 Detector4*9 #6564*9 Registration – #6571 – – #6572*9 #6573*9 #6574*9 Deregistration – #6581 – #6582*9 #6583*9 #6584*9 Call block*1 Block a single number – Block range of numbers – #217 23 24 Blo
Programming Sub-menu 1 Sub-menu 2 Settings Code Auto intercom Handset On #273 Base unit*1, *3 On #G273 21 Key tone – Off #165 – Caller ID edit (Caller ID number auto edit) – Off #214 40 Auto talk*10 – On #200 17 Set dial mode*1 Pulse #120 15 Set flash time*1, *11 80 ms 90 ms 100 ms 110 ms 160 ms 200 ms 250 ms 300 ms 400 ms 600 ms <700 ms> 900 ms #121 18 A #122 – Off #194 19 37 Set tel line Set line mode*1, *12 Call – sha
Programming Main menu: “Baby monitor” Sub-menu 1 Settings Code On/Off – On #268 35 Sensitivity level – Low High #269 36 Main menu: Sub-menu 2 “Key detector”*7 Sub-menu 1 Sub-menu 2 Settings Code Search – – Battery check – – #655 – *1 If you program these settings using one of the units, you do not need to program the same item using another unit. *2 This menu is not displayed when scrolling through the display menus. It is only available in direct command code.
Programming Alarm An alarm sounds at the set time for 1 minute and is repeated 5 times at 5 minute intervals (snooze function). A text memo can also be displayed for the alarm. A total of 3 separate alarm times can be programmed for each handset. You can set one of 3 different alarm options (once, daily, or weekly) for each alarm time. Important: R Make sure the unit’s date and time setting is correct (page 14). 1 2 3 MMENUN#720 MbN: Select the desired alarm.
Programming 2 MbN: Select the desired setting. a MSAVEN R If you select “Off”, press MOFFN to exit. 3 Enter the desired hour and minute you wish to start this feature. 4 5 6 7 *1 *: Select “AM” or “PM”. a MOKN Enter the desired hour and minute you wish to end this feature. *: Select “AM” or “PM”.
Programming Note: R When this feature is on, another handset or the base unit can hear the monitored handset by making an intercom call. To monitor from outside If you enable this feature, the unit will call a pre-programmed phone number when the handset detects sound. After you answer the call, you can listen in on the room where the handset is located. n From the phonebook: 1 MMENUN#268 2 3 4 5 MbN: “Phonebook” a MSELECTN MbN: Select the phonebook entry. a MSAVEN R “Baby monitor” will be displayed.
Programming Answering the baby monitor Displaying the handset name n When monitoring with a unit: Handset: Press M N to answer a call. Base unit: Press M N to answer a call*1. *1 KX-TGE440 series: page 3 You can select whether or not the handset name is displayed in standby mode. The default setting is “Off”. If you want to respond from the monitoring unit, press MMUTEN. R The monitoring unit will answer calls automatically when the auto intercom feature is set to “On” (page 21).
Programming Deregistering a handset A handset can cancel its own registration to the base unit, or other handsets registered to the same base unit. This allows the handset to end its wireless connection with the system. 1 MMENUN#131 R All handsets registered to the base unit are displayed. 2 MbN: Select the handset you want to cancel. a MSELECTN 3 MbN: “Yes” a MSELECTN a MOFFN 38 For assistance, please visit http://shop.panasonic.com/support TGE43xUS(en)_1112_ver021.
Caller ID Service Using Caller ID service Important: R This unit is Caller ID compatible. To use Caller ID features, you must subscribe to a Caller ID service. Contact your phone service provider for details. Caller ID features When an outside call is being received, the caller information is displayed. Caller information for the last 50 callers is logged in the caller list from the most recent call to the oldest.
Caller ID Service Editing a caller’s phone number You can edit a phone number in the caller list by removing its area code and/or the long distance code “1”. 1 2 3 4 5 MCN CID MbN: Select the desired entry. a MMENUN MbN: “Edit” a MSELECTN 3 MERASEN a MbN: “Yes” a MSELECTN a MOFFN Erasing all caller information 1 2 MCN CID MERASEN a MbN: “Yes” a MSELECTN a MOFFN Press MEDITN repeatedly until the phone number is shown in the desired format.
Answering System Answering system The answering system can answer and record calls for you when you are unavailable to answer the phone. You can also set the unit to play a greeting message but not to record caller messages by selecting “Greeting only” as the recording time setting (page 46). Important: R Make sure the unit’s date and time setting is correct (page 14). Memory capacity (including your greeting message) The total recording capacity is about 17 minutes.
Answering System Resetting to a pre-recorded greeting message Use this procedure to erase your greeting message and use a pre-recorded one. 1 2 Key Operation MERASEN Erase currently playing message *1 MMENUN#304 MYESN a MOFFN If pressed within the first 5 seconds of a message, the previous message is played. Erasing all messages Playing back the greeting message Press MERASEN 2 times while the unit is not in use. 1 2 Using the handset MMENUN#303 To exit, press MOFFN.
Answering System Key Operation 76 Record greeting message 8 Turn answering system on MPAUSEN Pause message*2 9 or MSTOPN Stop recording Stop playback 0 Turn answering system off *4*3 Erase currently playing message *5 Erase all messages *6 Reset to a pre-recorded greeting message *1 *2 *3 If pressed within the first 5 seconds of a message, the previous message is played.
Answering System n By entering a phone number: 1 MMENUN#338 2 3 4 5 MbN: “Notification to” a MSELECTN a MADDN MbN: “Manual” a MSELECTN Enter the desired name (16 characters max.). a MOKN Enter the desired number (24 digits max.). a MOKN a MSELECTN a MOFFN Turning on/off the new message alert setting 1 2 3 5 MbN: “On/Off” a MSELECTN MbN: Select the desired setting.
Answering System Remote access code A 3-digit remote access code must be entered when operating the answering system remotely. This code prevents unauthorized parties from listening to your messages remotely. The default setting is “111”. Important: R To prevent unauthorized access to this product, we recommend that you regularly change the remote code. 1 2 MMENUN#306 Enter the desired 3-digit remote access code.
Answering System Answering system settings Call screening While a caller is leaving a message, you can listen to the call through the unit’s speaker. To adjust the speaker volume, press MjN or MkN repeatedly. You can answer the call by pressing M N on the handset or MZN on the base unit*1. Call screening can be set for each unit. The default setting is “On”. 1 For handset setting: MMENUN#310 For base unit setting (using a handset)*1: MMENUN#*310 2 MbN: Select the desired setting.
Useful Information Voicemail service In addition to your unit’s answering system you may also have voicemail service from your phone service provider. Voicemail is an answering service that may be offered by your phone service provider. This service can also record calls when you are unavailable to answer the phone or when your line is busy. Messages are recorded on the phone company system and not on the unit’s answering system.
Useful Information Listening to voicemail messages When new messages have been recorded: – “Voicemail msg. via phone co.” is displayed if message indication service is available. – The message indicator on the handset flashes slowly if the message indicator is turned on (page 46). Handset 1 MMENUN#330 R The speakerphone turns on. 2 3 Follow the pre-recorded instructions. Wall mounting Note: R Make sure that the wall and the fixing method are strong enough to support the weight of the unit.
Useful Information 3 Insert the hooks on the wall mounting adaptor into holes (1) and (2) on the base unit. 2 1 5 Mount the unit on a wall then slide down to secure in place. 1 AC adaptor cord R This product is compliant with the following wall phone plate sizes (2 types). 2 83 mm (3 1/4 inches) 3 102 mm (4 inches) Fit the slots of the unit onto the corresponding wall phone plate tabs for (4) and (5) respectively.
Useful Information To remove the wall mounting adaptor While pushing down the release levers (A), remove the adaptor (B). A A B Charger Drive the screws (1) (not supplied) into the wall. 2 27.2 mm (1 1/16 inches) 2 1 50 For assistance, please visit http://shop.panasonic.com/support TGE43xUS(en)_1112_ver021.
Useful Information Error messages Display message Cause/solution Ask phone company for VM access # R You have not stored the voicemail access number. Store the number (page 47). Base no power or No link. Reconnect base AC adaptor. or No link. R Confirm the base unit’s AC adaptor is connected to the unit and the power outlet correctly. R The handset has lost communication with the base unit. Move closer to the base unit and try again. R Unplug the base unit’s AC adaptor to reset the unit.
Useful Information Troubleshooting If you still have difficulties after following the instructions in this section, disconnect the base unit’s AC adaptor, then reconnect the base unit’s AC adaptor. Remove the batteries from the handset, and then insert them into the handset again. General use Problem Cause/solution The handset does not turn on even after installing charged batteries. R Place the handset on the base unit or charger to turn on the handset. The unit does not work.
Useful Information Battery recharge Problem Cause/solution The handset beeps and/or flashes. R Battery charge is low. Fully charge the batteries (page 11). I fully charged the batteries, but – still flashes, – is displayed, or – the operating time seems to be shorter. R Clean the battery ends ( , ) and the charge contacts with a dry cloth and charge again. R It is time to replace the batteries (page 10).
Useful Information Problem Cause/solution I cannot use voice paging. R You cannot use voice paging if other units are in use. R Voice paging is not available when a range extender (KX-TGA405) is registered to the base unit. Caller ID/Talking Caller ID Problem Cause/solution Caller information is not displayed. R You must subscribe to Caller ID service. Contact your phone service provider for details.
Useful Information Problem Cause/solution The 2nd caller’s information is not displayed during an outside call. R In order to use Caller ID, call waiting, or Call Waiting Caller ID (CWID), you must first contact your phone service provider and subscribe to the desired service. After subscribing, you may need to contact your phone service provider again to activate this specific service, even if you already subscribed to both Caller ID and Call Waiting with Caller ID services (CWID).
Useful Information Voicemail Problem Cause/solution “Voicemail msg. via phone co.” is shown on the handset display. How do I remove this message from the display? R This notification is displayed when your phone service provider’s voicemail service (not the unit’s answering system) has recorded a message for you. Typically you can remove this notification from the display by listening to the message.
Useful Information FCC and other information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ----------. If requested, this number must be provided to the telephone company. L Registration No.............(found on the bottom of the unit) L Ringer Equivalence No. (REN).......0.
Useful Information manufacturer about the availability of Hearing Aids which provide adequate shielding to RF energy commonly emitted by digital devices. WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO EMERGENCY NUMBERS: 1) Remain on the line and briefly explain to the dispatcher the reason for the call. 2) Perform such activities in the off-peak hours, such as early morning or late evenings. This device complies with Part 15 of the FCC Rules.
Useful Information Compliance with TIA-1083 standard: Telephone handsets identified with this logo have reduced noise and interference when used with T-Coil equipped hearing aids and cochlear implants. Compatible with Hearing Aid T-Coil T TIA-1083 For assistance, please visit http://shop.panasonic.com/support TGE43xUS(en)_1112_ver021.
Guía Rápida Española Guía Rápida Española Conexiones Unidad base 1 Conecte el adaptador de corriente alterna a la unidad presionándolo firmemente. 2 Enganche el cable para fijarlo. 3 Conecte el adaptador de corriente alterna a la toma de corriente. 4 Conecte el cable de la línea telefónica a la unidad, y después a la toma telefónica de una sola línea (RJ11C) hasta que escuche un clic. 5 Se requiere un filtro DSL/ADSL (no incluido) si tiene este tipo de servicio.
Guía Rápida Española Instalación y carga de la batería Cargue aproximadamente durante 7 horas. 2 1 Nota: L UTILICE SOLO baterías recargables de Ni-MH tamaño AAA (R03) ( 1 ). L NO utilice baterías alcalinas, de manganeso ni de Ni-Cd. L Confirme que las polaridades estén correctas (S, T). L Cambie el idioma de la pantalla. L Confirme que aparezca “Cargando” ( 2 ).
Guía Rápida Española Cambio de idiomas (Auricular) (predeterminado: “English”) Cuando instale las baterías por primera vez, es posible que aparezca “Set date/time Press SELECT”. Oprima {OFF} para salir. Idioma de la pantalla {MENU}(11) s {r}: “Español” s {GUARDAR} s {OFF} Idioma de anuncio de voz {MENU}(112 s {r}: “Español” s {GUARDAR} s {OFF} Fecha y hora (Auricular) 1 2 3 4 {MENU}(1)1 Introduzca el día, mes y año actuales. s {OK} Introduzca la hora y minuto actuales (formato de reloj de 24 horas).
Guía Rápida Española Operaciones básicas Cómo hacer y contestar llamadas (unidad base: serie KX-TGE440) Para hacer llamadas {s} s Marque el número telefónico. Para contestar llamadas {s} Para colgar {s} Para ajustar el volumen del altavoz Oprima {+} o {-} repetidamente mientras habla. Remarcación del último número marcado {s} s {REDIAL} Para ajustar el volumen del timbre de la unidad base Oprima {+} o {-} repetidamente para seleccionar el volumen deseado.
Guía Rápida Española Preguntas frecuentes Pregunta Causa y solución ¿Por qué aparece _? L El auricular está demasiado lejos de la unidad base. Acérquelo. L El adaptador para corriente de la unidad base no está conectado correctamente. Conecte de nuevo el adaptador para corriente a la unidad base. L El auricular no está registrado en la unidad base. Regístrelo. 1 Auricular: {MENU}(13) 2 Unidad base: Oprima y mantenga oprimido {LOCATOR} o {HANDSET LOCATOR} durante aproximadamente 5 segundos.
Appendix Customer services Shop Accessories! for all your Panasonic gear Go to hp://shop.panasonic.com/support Get everything you need to get the most out of your Panasonic products Accessories & Parts for your Camera, Phone, A/V products, TV, Computers & Networking, Personal Care, Home Appliances, Headphones, Baeries, Backup Chargers & more… Customer Services Directory For Product Informa!on, Opera!ng Assistance, Parts, Owner’s Manuals, Dealer and Service info go to hp://shop.panasonic.
Appendix Limited Warranty (ONLY FOR U.S.A.
Appendix Limited Warranty Limits and Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage.
Index F G H Index # A B C D E 3-way conference: 19 Additional handset: 37 Alarm: 34 Answering calls: 17 Answering system Call screening: 46 Erasing messages: 42, 43, 45 Greeting message: 41 Greeting only: 46 Listening to messages: 42, 45 New message alerting: 43 Number of rings: 46 Recording time: 46 Remote access code: 45 Remote operation: 44 Ring count: 46 Toll saver: 46 Turning on/off: 41 Auto intercom: 21 Auto talk: 17, 32 Baby monitor: 35 Battery: 10, 11 Booster (Clarity booster): 18 Call block:
Notes 69 TGE43xUS(en)_1112_ver021.
Notes 70 TGE43xUS(en)_1112_ver021.
Notes 71 TGE43xUS(en)_1112_ver021.
IMPORTANT! If your product is not working properly. . . 1 Reconnect AC adaptor to the base unit. 2 Check if telephone line cord is connected. 3 Use rechargeable Ni-MH batteries. (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.) 4 Read troubleshooting page in the Operating Instructions. Visit our Web site: http://shop.panasonic.com/support L FAQ and troubleshooting hints are available.
