Operating Instructions Cordless Telephone with Bluetooth and Digital Answering Machine Model No. KX-TGE463 KX-TG654SK KX-TG684SK KX-TGE474 KX-TGE475 Model shown is KX-TGE463. Before initial use, see “Getting Started” on page 11. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. Consulte “Guía Rápida Española”, página 81. For assistance, visit our Web site: http://shop.panasonic.
Table of Contents Introduction Phonebook Model composition .......................................4 Accessory information ..................................4 Phonebook .................................................34 Speed dial ..................................................36 Important Information Programming For your safety .............................................7 Important safety instructions ........................8 For best performance ...................................
Table of Contents Index Index...........................................................94 3 TGE46x47x(en)_1117_ver061.
Introduction Model composition n KX-TGE460 series n KX-TGE470 series R Model shown is KX-TGE463. R Model shown is KX-TGE474. Base unit Handset Part No. Part No. KX-TGE463 KX-TGE460 KX-TGEA40 3 KX-TG654SK KX-TGE460 KX-TGEA40 4 KX-TG684SK KX-TGE460 KX-TGEA40 4 KX-TGE474 KX-TGE470 KX-TGEA40 4 KX-TGE475 KX-TGE470 KX-TGEA40 5 Series Model No. KX-TGE460 series KX-TGE470 series Quantity Accessory information Supplied accessories Quantity KX-TG654SK KX-TG684SK KX-TGE474 No.
Introduction *5 *6 *7 PNYNTGEA20BR (Black), PNYNTGEA20SR (White) PNKE1312Z2 (Black), PNKE1312Z1 (White) PNLC1050ZB (Black), PNLC1050ZS (Silver) A B F C D E G Additional/replacement accessories Please contact your nearest Panasonic dealer for sales information (page 91). Accessory item Model number/Specifications Rechargeable batteries HHR-4DPA*1 R To order, please visit http://shop.panasonic.
Introduction Expanding your phone system Handset (optional): KX-TGEA40 You can expand your phone system by registering optional handsets (6 max.) to a single base unit. R Optional handsets may be a different color from that of the supplied handsets. Bluetooth® devices You can expand your phone system by pairing the following units to a single base unit. Your Bluetooth cellular phone*1: 2 max. (for cellular calls: page 17) Your Bluetooth headset*1: 1 max.
Important Information R Do not allow the AC adaptor or telephone line cord to be excessively pulled, bent or placed under heavy objects. For your safety To prevent severe injury and loss of life/ property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R Use only the power source marked on the product. R Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock.
Important Information R This product is unable to make calls when: – the handset batteries need recharging or have failed. – there is a power failure. Battery R We recommend using the batteries noted on page 5. USE ONLY rechargeable Ni-MH batteries AAA (R03) size. R Do not mix old and new batteries. R Do not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed.
Important Information R If the reception for a base unit location is not satisfactory, move the base unit to another location for better reception. Environment R Keep the product away from electrical noise generating devices, such as fluorescent lamps and motors. R The product should be kept free from excessive smoke, dust, high temperature, and vibration. R The product should not be exposed to direct sunlight. R Do not place heavy objects on top of the product.
Important Information Specifications R Standard: DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0) Bluetooth wireless technology 2.1 R Frequency range: 1.92 GHz to 1.93 GHz (DECT) 2.402 GHz to 2.48 GHz (Bluetooth) R RF transmission power: 115 mW (max.) R Power source: 120 V AC, 60 Hz R Power consumption: Base unit: Standby: Approx. 1.2 W Maximum: Approx. 4.5 W Charger: Standby: Approx. 0.1 W Maximum: Approx. 1.
Getting Started n Charger Connect the AC adaptor to the power outlet. Setting up Connections R If you do not connect the telephone line cord and use only cellular lines, set the cellular line only mode to use this unit more conveniently (page 19). n Base unit Connect the AC adaptor to the unit by pressing the plug firmly. Fasten the cord by hooking it. Connect the AC adaptor to the power outlet.
Getting Started Battery level Battery charging Charge for about 7 hours. R Confirm “Charging” is displayed (1). R When the batteries are fully charged, “Fully charged” is displayed. Icon Battery level High Medium 1 Low Needs charging. Empty Panasonic Ni-MH battery performance (supplied batteries) Note when setting up Note for connections R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.
Getting Started Display MOFFN ( ) MCALL BLOCKN ( Charge contacts Controls Handset B A K L C D M E ) n Control type Soft keys By pressing a soft key, you can select the feature shown directly above it on the display. After a cellular phone is paired, MCELLN is displayed. Navigator key – MDN, MCN, MFN, or MEN: Scroll through various lists and items. (Volume: MDN or MCN): Adjust the – receiver or speaker volume while talking. – MFN W: View the phonebook entry. – MEN REDIAL: View the redial list.
Getting Started M N (PLAY/STOP) Message indicator MLOCATES CELLN MHANDSET LOCATORN MjN/MkN (VOL.: Volume up/down) MERASEN MCELL 1N (For pairing) M N (Skip) MCELL 2N (For pairing) M N (Repeat) MCELL 1N M N (Skip) MCELL 2N M N (Repeat) Microphone Dial keypad (*: TONE) Display icons/Indicators Handset display items n KX-TGE470 series: page 4 G C Item Within base unit range I Out of base unit range F J K B LM The landline is in use. R When flashing: The call is put on hold.
Getting Started Item Meaning CELL indicators on the base unit Ringer volume is off.*3 (page 22, 40, 42) The CELL indicators show each cellular line status. Silent mode is on. (page 47) Call sharing mode is off. (page 44) Status Meaning On A cellular phone is connected. Ready to make/receive cellular calls. Flashing – The cellular line is in use. – Phonebook entries are being copied from a cellular phone (page 53). – The base unit is searching for the paired cellular phone.
Getting Started Status Meaning Light off – A Bluetooth headset is not paired to the base unit. – The Bluetooth headset is not connected to the base unit. Language settings Recording your greeting message You can record your own greeting message instead of using a pre-recorded greeting message. See page 58 for details. Display language 1 2 Note: R When English is selected as the display language, 12-hour clock format is used. When Spanish is selected, 24-hour clock format is used.
Link to Cell Link to cell feature You can connect your base unit and cellular phone using Bluetooth wireless technology, so that you can make or answer cellular calls using your phone system. This allows you to: – use the unit to talk on cellular calls even if some areas of your home have poor cellular reception, simply by placing your cellular phone in an area with good reception. – talk on cellular calls even if your cellular phone is in your pocket or bag.
Link to Cell 2 MbN: “Yes” a MSELECTN R When the cellular phone is unpaired, the CELL indicator is turned off. 3 MOFFN Link to cell settings Selecting which unit receives cellular calls You can select which unit rings and receives calls for a cellular line. When “All” is selected, all handsets and the base unit ring. 1 For CELL 1: MMENUN#6271 For CELL 2: MMENUN#6272 2 MbN: Select the desired handset or “All”.
Link to Cell unit range. You can set the interval. The default setting is “1 min”. Important: R When 3 Bluetooth devices (2 cellular phones and 1 headset) are paired to the base unit, only 2 Bluetooth devices can be used with the unit at the same time, and the base unit loses its connection from other Bluetooth devices. To automatically resume the connection to Bluetooth devices, leave the auto connection on.
Link to Cell When you use the landline again Before connecting the telephone line to the base unit, select “Off” in step 2, “Cellular line only mode (If you do not use the landline)”, page 19. Cellular line selection This feature determines which cellular line is selected to make cellular calls when: – you press MCELLN on the handset. – you press M N or MZN on the handset while the cellular line only mode is turned on. – you press MZN on the base unit while the cellular line only mode is turned on.
Making/Answering Calls Using the Handset Making cellular calls Important: R The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines, or the landline and 1 cellular line). R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). R Before making calls, confirm that the corresponding on the handset is displayed (page 14). 1 Lift the handset and then dial the phone number.
Making/Answering Calls Using the Handset To switch back to the receiver, press MZN/ M N. R In step 1, you can store the dialed phone number to the phonebook by pressing and holding MFN W for a few seconds. Making a call using the redial list The last 5 phone numbers dialed are stored in the redial list (each 48 digits max.). 1 2 3 MEN REDIAL MbN: Select the desired entry.
Making/Answering Calls Using the Handset Note: R After holding for 10 minutes, the call is disconnected. Temporary tone dialing for landline calls (for rotary/pulse service users) Mute Press * (TONE) before entering access numbers which require tone dialing. 1 2 Press MMUTEN during a call. To return to the call, press MMUTEN. Note: R MMUTEN is a soft key visible on the display during a call.
Making/Answering Calls Using the Handset 1 2 3 4 Press MMENUN while talking. MbN: “Equalizer” a MSELECTN MbN: Select the desired setting. Press MOKN to exit. Note: R The setting you made is kept for each line (landline and cellular lines). R Depending on the condition and quality of your telephone line, this feature may emphasize existing line noise. If it becomes difficult to hear, turn this feature off. R This feature is not available while using the speakerphone.
Making/Answering Calls Using the Handset ready to talk before transferring. For example, if your cellular phone has a top cover, open it beforehand. Transferring a cellular call from a cellular phone to the handset During a conversation using a cellular phone, the call cannot be transferred to the handset by the cellular phone. Perform the following with the handset. 1 2 During a conversation using a cellular phone, press MCELLN. R The call is transferred to the handset in the following situations.
Making/Answering Calls Using the Handset – Continuous use of the handset other than a handset in power backup mode: 2 hours max. – Not in use in power backup mode: 2 hours max. Making calls during a power failure n When only 1 handset is registered: 1 Lift the handset and dial the phone number. 2 Within 1 minute, place the handset on the base unit. R Wait until speakerphone is turned on automatically and the call is made.
Making/Answering Calls Using the Base Unit Making cellular calls Available for: KX-TGE470 series (page 4) Important: R The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines, or the landline and 1 cellular line). R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). R Before making calls, confirm that the corresponding CELL indicator on the base unit lights up (page 15).
Making/Answering Calls Using the Base Unit When a cellular call is being received, the CELL indicator and SP-PHONE indicator flash rapidly. 1 Press MZN when the unit rings. R You can also answer the cellular call by pressing MCELL 1N or MCELL 2N. 2 3 Speak into the microphone. R A handset user can take the call by pressing M N. Note: R While a landline call is on hold, the SP-PHONE indicator flashes. R After holding for 10 minutes, the call is disconnected. When you finish talking, press MZN.
Making/Answering Calls Using the Base Unit Call share You can join an existing outside call. To select the line that is being used for the call: – for a cellular line press MCELL 1N or MCELL 2N. – for the landline press MZN. Note: R A maximum of 3 parties (including 1 outside party) can join a conversation using 2 extensions. (3-way conference) R To prevent other users from joining your conversations with outside callers, turn call sharing mode off (page 44).
Locator/Intercom Handset locator You can locate a misplaced handset by paging it. 1 Base unit: Press MLOCATORN or MHANDSET LOCATORN. R All registered handsets beep for 1 minute. 2 To stop paging: Base unit: Press MLOCATORN or MHANDSET LOCATORN. Handset: n KX-TGE460 series: page 4 Press MOFFN. n KX-TGE470 series: page 4 N, then press MOFFN. Press M R To stop calling: – KX-TGE460 series: press MLOCATES CELLN again. – KX-TGE470 series: press MZN.
Locator/Intercom Your voice will be heard using the speakers of the base unit*1 and all handsets, until a paged party answers your page or until you press MOFFN. After the other party answers, the speakerphone mode is turned on. monitor feature (page 49) will also answer baby monitor calls automatically. The default setting is “Off”. 1 When you finish talking, press MOFFN.
Call Block Call block You can press the MCALL BLOCKN button in the following situations to disconnect the current call and add a phone number to the call block list: – when an incoming call is being received – when an incoming call is being recorded by the answering system – when talking on an outside call Once a phone number has been added to the call block list, the unit will block calls from that phone number in the future. 1 Press MCALL BLOCKN under the situations shown above.
Call Block “Call block” a MSELECTN a Go to step 4. 3 4 5 MCALL BLOCKN MbN: “Yes” a MSELECTN Edit the phone number if necessary (24 digits max.). a MSAVEN a MOFFN “No”: The first ring is muted for all calls. If this setting is selected, the unit will never ring for calls from blocked phone numbers.
Phonebook Key Operation Phonebook MFN MEN Move the cursor You can add 3,000 names (16 characters max.) and phone numbers (24 digits max.) to the phonebook, and assign each phonebook entry to the desired group (page 35). The following groups are available: – Group 1: “Home”*1 (default) – Group 2: “Cell 1”*1 – Group 3: “Cell 2”*1 – Group 4-9: You can change the group name for each group. *1 For groups 1-3, the group names cannot be changed.
Phonebook 3 4 5 MSAVEN Continue from step 3, “Editing entries”, page 36. n When a cellular phone is not paired: 1 MCN CID 2 5 To set group ringer tone MbN: Select the current setting of the group ringer tone. a MSELECTN a MbN: Select the desired ringer tone. a MSAVEN 6 MOFFN MbN: “Phonebook” a MSELECTN MbN: Select the desired entry. a MMENUN R To edit the number: MbN: “Edit” a MSELECTN Press MEDITN repeatedly until the phone number is shown in the desired format.
Phonebook Editing entries 1 2 3 4 5 Find the desired entry (page 35). MMENUN a MbN: “Edit” a MSELECTN Edit the name if necessary. a MOKN Edit the phone number if necessary. a MOKN MbN: Select the desired group (page 35). a MSELECTN 2 times a MOFFN Speed dial You can assign 1 phone number to each of the dial keys (1 to 9) on the handset.
Phonebook Erasing an entry 1 Press and hold the desired speed dial key (1 to 9). a MMENUN 2 3 MbN: “Erase” a MSELECTN MbN: “Yes” a MSELECTN a MOFFN Viewing an entry/Making a call n Using a cellular line: 1 Press and hold the desired speed dial key (1 to 9). 2 MCELLN R The unit starts dialing immediately in the following situations. – Only 1 cellular phone is paired. – A specific line is set to make cellular calls (page 20). 3 MbN: Select the desired cellular phone.
Programming Menu list To access the features, there are 2 methods. n Scrolling through the display menus 1 MMENUN 2 3 4 Press MCN or MDN to select the desired main menu. a MSELECTN Press MCN or MDN to select the desired item from the next sub-menus. a MSELECTN Press MCN or MDN to select the desired setting. a MSAVEN n Using the direct command code 1 MMENUN a Enter the desired code. Example: Press MMENUN#101. 2 Select the desired setting. a MSAVEN Note: R To exit the operation, press MOFFN.
Programming Sub-menu 1 Sub-menu 2 Settings Code New message alert*1 Outgoing call – On/Off On #338 60 Outgoing call – Notification to Settings – Outgoing call – Remote code Activate Base unit beep On #339 60 Ring count*1 Toll saver 2-7 rings <4 rings> #211 63 Recording time*1 <3 min> 1 min Greeting only*2 #305 63 Remote code*1 <111> #306 62 Screen call – Handset Off #310 63 Screen call – Base unit*1, *3 Off #G310 Answer on*1 – – #327
Programming Main menu: “Bluetooth” Sub-menu 1 Sub-menu 2 Link to cell – 1:Add new device*5 (for CELL 1) – 2:Add new device*5 (for CELL 2) Connect*1/ Disconnect*1 Settings Code – #6251*6 Ringer volume – Handset Off–6 <6> Ringer volume – Base unit*1 Off–6 <1> Ringer tone*8 *6 *7 #6291*6 Select unit to ring*1 Handset 1-6 #6271*6 Ring as cell (limited)*1 On (without Talking CID) Off #6141*6 Alert settings*1 – Alert On/Off Off #6101*6 Al
Programming Sub-menu 1 Sub-menu 2 Settings Code Settings Auto connect*1 Off <1 min> 3 min 5 min 10 min #632 18 #633 20 Cell line only mode*1 On – #157 19 Cell line select – Handset Cellphone 1*5 Cellphone 2*5 #634 20 Cell line select – Base unit*1, *3 *5 Cellphone 2*5 #G634 Set PIN*1 <0000> Cell area code*1 #619 20 International code*1 – #117 53 Country code*1 – #118 prefix*1 – #119 Trunk Main menu: “Set date & time” Sub-menu 1 Sub-menu 2
Programming Main menu: “Settings” Sub-menu 1 Sub-menu 2 Settings Code Ring adjustments Ringer volume – Handset*4 Off–6 <6> #160 – Ringer volume – Base unit*1, *4 Off–6 <1> #G160 – Ringer tone*4, *8, *11 (Handset) #161 – Interrupt tone – Handset*12 Off #201 25 Interrupt tone – Base unit*1, *3, *12 Off #G201 29 Silent mode – Handset On/Off – On – #238 47 Start/End – <11:00 PM/ 06:00 AM> #237 47 Select group Home Cell 1 Cell 2 Group 4-9 #241 47 On/O
Programming Sub-menu 1 Sub-menu 2 Settings Code Talking caller ID Handset Off #162 Base unit*1 On #G162 Change name*1 Detector1 #6561 Detector2*15 #6562*15 Detector3*15 #6563*15 Detector4*15 #6564*15 Key detector setting*13 – 1:Add new device (for Detector1)*14 – 2:Add new device (for Detector2) – 3:Add new device (for Detector3) – 4:Add new device (for Detector4) Registration – #6571 51 – – #6572*15 #6573*15 #6574*15 Deregistration – #6581 – #6582*15 #6583*15 #6584
Programming Sub-menu 1 Sub-menu 2 Settings Code Auto intercom Handset On #273 Base unit*1, *3 On #G273 31 Key tone – Off #165 – Caller ID edit (Caller ID number auto edit) – Off #214 52 Auto talk*16 – On #200 22 Set dial mode*1 Pulse #120 16 Set flash time*1, *17 80 ms 90 ms 100 ms 110 ms 160 ms 200 ms 250 ms 300 ms 400 ms 600 ms <700 ms> 900 ms #121 23 Set line mode*1, *18 A #122 – Off #194 24, 29 Set tel line*4 – Call
Programming Main menu: “Baby monitor” Sub-menu 1 Settings Code On/Off – On #268 47 Sensitivity level – Low High #269 48 Main menu: Sub-menu 2 “Key detector”*13 Sub-menu 1 Sub-menu 2 Settings Code Search – – Battery check – – *1 *2 *3 *4 *5 *6 *7 *8 *9 *10 *11 *12 *13 *14 *15 *16 *17 #655 – If you program these settings using one of the units, you do not need to program the same item using another unit.
Programming *18 Generally, the line mode setting should not be changed. This setting automatically maintains receiver volume at the proper level depending on the current telephone line condition. Set the line mode to “A” if telephone line condition is not good. Alarm An alarm sounds at the set time for 1 minute and is repeated 5 times at 5 minute intervals (snooze function). A text memo can also be displayed for the alarm. A total of 3 separate alarm times can be programmed for each handset.
Programming R If you have set the alarm, the alarm sounds even if the silent mode is turned on. Turning silent mode on/off 1 For handset setting: MMENUN#238 For base unit setting (using a handset)*1: MMENUN#*238 2 MbN: Select the desired setting. a MSAVEN R If you select “Off”, press MOFFN to exit. 3 Enter the desired hour and minute you wish to start this feature. 4 5 6 7 *1 *: Select “AM” or “PM”. a MOKN Enter the desired hour and minute you wish to end this feature. *: Select “AM” or “PM”.
Programming 3 MbN: Select the desired unit’s number to monitor with. a MSAVEN R “Baby monitor” will be displayed. R The registered unit’s name/number is displayed. Note: R When this feature is on, another handset or the base unit can hear the monitored handset by making an intercom call. To monitor from outside If you enable this feature, the unit will call a pre-programmed phone number when the handset detects sound. After you answer the call, you can listen in on the room where the handset is located.
Programming 3 MbN: Select the desired setting. a MSAVEN a MOFFN 2 Enter the desired name (10 characters max.). a MSAVEN a MOFFN Answering the baby monitor Displaying the handset name n When monitoring with a unit: Handset: Press M N to answer a call. Base unit: Press MZN to answer a call.*1 *1 KX-TGE470 series: page 4 You can select whether or not the handset name is displayed in standby mode. The default setting is “Off”. If you want to respond from the monitoring unit, press MMUTEN.
Programming Deregistering a handset A handset can cancel its own registration to the base unit, or other handsets registered to the same base unit. This allows the handset to end its wireless connection with the system. 1 MMENUN#131 R All handsets registered to the base unit are displayed. 2 MbN: Select the handset you want to cancel. a MSELECTN 3 MbN: “Yes” a MSELECTN a MOFFN 50 For assistance, please visit http://shop.panasonic.com/support TGE46x47x(en)_1117_ver061.
Caller ID Service Using Caller ID service Important: R This unit is Caller ID compatible. To use Caller ID features, you must subscribe to a Caller ID service. Contact your phone service provider for details. Caller ID features When an outside call is being received, the caller information is displayed. Caller information for the last 50 callers is logged in the caller list from the most recent call to the oldest.
Caller ID Service – A specific line is set to make cellular calls (page 20). 5 MbN: Select the desired cellular phone. a MSELECTN n Using a landline 1 2 MCN CID Press MCN to search from the most recent call, or MDN to search from the oldest call. 3 To call back, press M To exit, press MOFFN. N. Note: R If the entry has already been viewed or answered, “ ” is displayed. R or indicates the caller information was received from the cellular line.
Using Bluetooth® Devices Copying phonebook from a cellular phone (phonebook transfer) You can copy phonebook entries from the paired cellular phones or other cellular phones (not paired) to the unit’s phonebook. A cellular phone must be compatible with Bluetooth wireless technology. Important: R Your cellular phone must support Phone Book Access Profile (PBAP) or Object Push Profile (OPP) specification. R If a copied entry has 2 or more phone numbers, each phone number (6 max.
Using Bluetooth® Devices – “Trunk prefix”: A trunk prefix; the initial digit(s) to be dialed in a domestic call, prior to the area code. 1 2 MMENUN To store “International code”: #117 To store “Country code”: #118 To store “Trunk prefix”: #119 3 Enter the desired number. a MSAVEN a MOFFN Note: R After you copy the entries, confirm that the numbers were transferred correctly.
Using Bluetooth® Devices – Handset: “Alert On/Off” must be turned on (page 55). R If this feature does not work, turn on your device’s Bluetooth feature, unplug the base unit’s AC adaptor, and then reconnect it. *1 Turning on [Application Alerts manager] Use the following procedure after installing the Link to Cell app. Android 2.x: Open your device’s [Settings] app. a Tap [Accessibility]. a Turn on the [Accessibility] and [Application Alerts manager] checkboxes. Android 4.
Using Bluetooth® Devices Using a Bluetooth wireless headset (optional) for landline calls Connecting/disconnecting a headset If you cannot connect the headset and base unit using the headset, you can connect using the handset. To use your headset with another Bluetooth device such as a cellular phone, you may need to disconnect it from the base unit. Important: R Make sure that the headset is turned on.
Using Bluetooth® Devices Answering landline calls with your headset To answer a landline call, press your headset’s button referring to your headset operating instructions. When you finish talking, press your headset’s button referring to your headset operating instructions. Note: R If you cannot hang up the call using your headset: N (STOP) on the base unit. – press M (KX-TGE460 series: page 4) – press MZN on the base unit 2 times.
Answering System for Landline Answering system for landline The answering system can answer and record calls for you when you are unavailable to answer the phone. You can also set the unit to play a greeting message but not to record caller messages by selecting “Greeting only” as the recording time setting (page 63). Important: R Make sure the unit’s date and time setting is correct (page 16). Memory capacity (including your greeting message) The total recording capacity is about 18 minutes.
Answering System for Landline Resetting to a pre-recorded greeting message Use this procedure to erase your greeting message and use a pre-recorded one. 1 2 Key Operation MERASEN Erase currently playing message *1 MMENUN#304 MYESN a MOFFN If pressed within the first 5 seconds of a message, the previous message is played. Erasing all messages Playing back the greeting message Press MERASEN 2 times while the unit is not in use. 1 2 Using the handset MMENUN#303 To exit, press MOFFN.
Answering System for Landline 3 Key Operation 76 Record greeting message 8 Turn answering system on MPAUSEN Pause message*2 9 or MSTOPN Stop recording Stop playback 0 Turn answering system off *4*3 Erase currently playing message *5 Erase all messages *6 Reset to a pre-recorded greeting message *1 If pressed within the first 5 seconds of a message, the previous message is played.
Answering System for Landline you specify. You can then operate the answering system remotely to listen to the new message. To use this feature, you must: – store a phone number to which the unit makes the call to. – turn on the new message alert setting. After you answer the new message alert call, you can listen to messages from that call (page 61). This feature is only available for landline. Important: R A new message alert is stopped 1 minute after the unit starts to call.
Answering System for Landline n When the remote access code is set to “Inactivate”: Press 4 to play the new message during the announcement. n When the remote access code is set to “Activate”: 1 Enter the remote access code (page 62) during the announcement. 2 Press 4 to play the new message. Note: R Within 10 seconds after listening to new messages, you can press #9 during the call to turn off the new message alert by a call feature.
Answering System for Landline Key Operation *5 Erase all messages *# End remote operation (or hang up) *1 *2 *3 If pressed within the first 5 seconds of a message, the previous message is played. For English voice guidance only For Spanish voice guidance only Turning on the answering system remotely 1 Dial your phone number from a touch-tone phone. 2 Let the phone ring 15 times. R A long beep is heard. 3 Enter your remote access code within 10 seconds after the long beep.
Answering System for Landline Handset message indicator You can select whether or not the message indicator on the handset flashes slowly when new messages are recorded. The default setting is “On”. Important: R If you stored the voicemail access number (page 65), the message indicator also flashes for newly recorded voicemail messages (page 66). 1 2 MMENUN#340 MbN: Select the desired setting. a MSAVEN a MOFFN Note: R While message indicator is on, battery operating time is shortened (page 12).
Useful Information Voicemail service for landline In addition to your unit’s answering system you may also have voicemail service from your phone service provider. Voicemail is an answering service that may be offered by your phone service provider. This service can also record calls when you are unavailable to answer the phone or when your line is busy. Messages are recorded on the phone company system and not on the unit’s answering system.
Useful Information Listening to voicemail messages When new messages have been recorded: – “Voicemail msg. via phone co.” is displayed if message indication service is available. – The message indicator on the handset flashes slowly if the message indicator is turned on (page 64). Handset 1 MMENUN#330 R The speakerphone turns on. 2 3 Follow the pre-recorded instructions. Wall mounting Note: R Make sure that the wall and the fixing method are strong enough to support the weight of the unit.
Useful Information 3 Insert the hooks on the wall mounting adaptor into holes (1) and (2) on the base unit. 1 2 4 2 5 Mount the unit on a wall then slide down to secure in place. 1 AC adaptor cord R This product is compliant with the following wall phone plate sizes (2 types). 2 83 mm (3 1/4 inches) 3 102 mm (4 inches) Fit the slots of the unit onto the corresponding wall phone plate tabs for (4) and (5) respectively.
Useful Information To remove the wall mounting adaptor While pushing down the release levers (A), remove the adaptor (B). A A B Charger Drive the screws (1) (not supplied) into the wall. 2 27.2 mm (1 1/16 inches) 2 1 68 For assistance, please visit http://shop.panasonic.com/support TGE46x47x(en)_1117_ver061.
Useful Information Error messages Display message Cause/solution Ask phone company for VM access # R You have not stored the voicemail access number. Store the number (page 65). Base no power or No link. Reconnect base AC adaptor. or No link. R Confirm the base unit’s AC adaptor is connected to the unit and the power outlet correctly. R The handset has lost communication with the base unit. Move closer to the base unit and try again. R Unplug the base unit’s AC adaptor to reset the unit.
Useful Information Display message Cause/solution Invalid R There is no handset registered to the base unit matching the handset number you entered. R The handset is not registered to the base unit. Register the handset (page 49). Requires subscription to Caller ID. R You must subscribe to a Caller ID service. Once you receive caller information after subscribing to a Caller ID service, this message will not be displayed. Use rechargeable battery.
Useful Information Problem Cause/solution I cannot connect a cellular phone to the base unit. R Confirm that your cellular phone is turned on. R Confirm that your cellular phone is within base unit range (page 14). R Your cellular phone’s Bluetooth feature is turned off. Turn it on. R Depending on the state of the wireless environment, such as the presence of any electrical interference, there may be a delay even if the auto connection feature is turned on.
Useful Information Battery recharge Problem Cause/solution The handset beeps and/or flashes. R Battery charge is low. Fully charge the batteries (page 12). I fully charged the batteries, but – still flashes, – is displayed, or – the operating time seems to be shorter. R Clean the battery ends ( , ) and the charge contacts with a dry cloth and charge again. R It is time to replace the batteries (page 11).
Useful Information Problem Cause/solution I can make and answer cellular calls but cannot hear a sound. R The Bluetooth technology on your cellular phone may not be functioning normally. Turn off and on your cellular phone. R Disconnect and reconnect the base unit AC adaptor and try again. I cannot switch cellular calls from the unit to the cellular phone. R Your cellular phone may not support this feature. Refer to the operating instructions of your cellular phone.
Useful Information Problem Cause/solution Caller information is displayed or announced late. R Depending on your phone service provider, the unit may display or announce the caller’s information at the 2nd ring or later. R Move closer to the base unit. Caller information is not announced. R The ringer volume for landline is turned off. Adjust the ringer volume (page 42). R The ringer volume for cellular line is turned off. Adjust the ringer volume (page 40).
Useful Information Using Bluetooth devices Problem Cause/solution I cannot copy phonebook entries from a cellular phone. R Confirm that the cellular phone supports Bluetooth wireless technology. R Confirm that the cellular phone supports the Phone Book Access Profile (PBAP) or Object Push Profile (OPP) specification. R If the cellular phone is already connected to another Bluetooth device such as a Bluetooth headset, turn it off or disconnect it from the cellular phone.
Useful Information Problem Cause/solution App alert is not displayed or announced. or Text message alert is not displayed or announced. R Confirm that the cellular phone supports the Message Access Profile (MAP) specification to use text message alert feature. R Confirm that the cellular phone supports the Serial Port Profile (SPP) specification to use App alert feature. R Confirm that the [Application Alerts manager] setting of your Android phone is turned on. R “Alert On/Off” is set to “Off”.
Useful Information Problem Cause/solution The unit does not emit the specified number of rings. R If the first ring is turned off (“No”) (page 33), the number of rings decreases by 1 from the specified number of rings. Bluetooth PIN Problem Cause/solution I cannot remember the PIN. R Change the PIN using the following method. 1 2 3 4 MMENUN#619 *7000 Enter the new 4-digit PIN. a MOKN Enter the new 4-digit PIN again. a MSAVEN a MOFFN Voicemail Problem Cause/solution “Voicemail msg. via phone co.
Useful Information FCC and other information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ----------. If requested, this number must be provided to the telephone company. L Registration No.............(found on the bottom of the unit) L Ringer Equivalence No. (REN).......0.
Useful Information manufacturer about the availability of Hearing Aids which provide adequate shielding to RF energy commonly emitted by digital devices. WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO EMERGENCY NUMBERS: 1) Remain on the line and briefly explain to the dispatcher the reason for the call. 2) Perform such activities in the off-peak hours, such as early morning or late evenings. This device complies with Part 15 of the FCC Rules.
Useful Information Compliance with TIA-1083 standard: Telephone handsets identified with this logo have reduced noise and interference when used with T-Coil equipped hearing aids and cochlear implants. Compatible with Hearing Aid T-Coil T TIA-1083 80 For assistance, please visit http://shop.panasonic.com/support TGE46x47x(en)_1117_ver061.
Guía Rápida Española Guía Rápida Española Conexiones Unidad base 1 Conecte el adaptador de corriente alterna a la unidad presionándolo firmemente. 2 Enganche el cable para fijarlo. 3 Conecte el adaptador de corriente alterna a la toma de corriente. 4 Conecte el cable de la línea telefónica a la unidad, y después a la toma telefónica de una sola línea (RJ11C) hasta que escuche un clic. 5 Se requiere un filtro DSL/ADSL (no incluido) si tiene este tipo de servicio.
Guía Rápida Española Sugerencias de operación Teclas de función Al oprimir una tecla de función, puede seleccionar la función que aparece directamente encima de ella en la pantalla. Preste atención a la pantalla para ver qué funciones están asignadas a las teclas de función durante la operación. Tecla de volumen Oprima {+} o {-} repetidamente: − ajustar el volumen del timbre. − ajustar el volumen del receptor o del altavoz mientras habla.
Guía Rápida Española Fecha y hora (Auricular) 1 2 3 4 {MENU}(1)1 Introduzca el día, mes y año actuales. s {OK} Introduzca la hora y minuto actuales (formato de reloj de 24 horas). {GUARDAR} s {OFF} Cómo grabar el mensaje de saludo del contestador de llamadas para la línea terrestre (Auricular) Puede grabar su propio mensaje de saludo en lugar de usar uno pregrabado. 1 {MENU}(3)2 s {r}: “Sí” s {SELEC.
Guía Rápida Española Enlace a celular Cómo emparejar un teléfono celular con Bluetooth 1 Unidad base: Oprima y mantenga oprimido {CELL 1} o {CELL 2} durante aproximadamente 5 segundos. L Después de que el indicador de CELL correspondiente comienza a parpadear en la unidad base, el resto del procedimiento debe completarse en menos de 5 minutos.
Guía Rápida Española Enlace a celular Cómo conectar o desconectar el teléfono celular (Auricular) Conexión automática a los dispositivos con Bluetooth (teléfonos celulares) La unidad se conecta a los dispositivos Bluetooth a intervalos regulares si se pierde la conexión. Consulte las instrucciones de operación para cambiar el intervalo (predeterminado: “1 min”).
Guía Rápida Española Operaciones básicas Cómo hacer y contestar llamadas (Auricular) Para hacer llamadas de celular 1 2 Marque el número telefónico. s {CEL.} L Cuando el modo exclusivo para la línea celular está configurado, también puede oprimir {C}/{s} en lugar de {CEL.}. L Cuando solo hay 1 teléfono celular emparejado, la unidad comienza a marcar. Cuando hay 2 teléfonos celulares emparejados: {r}: Seleccione el teléfono celular deseado. s {SELEC.
Guía Rápida Española Operaciones básicas Directorio telefónico (Auricular) Para añadir entradas 1 2 3 4 Para hacer llamadas 1 2 {<} k s {MENU} {r}: “Agregar Ent. Nueva” s {SELEC.} Introduzca el nombre de la persona (máx. 16 caracteres). s {OK} Introduzca el número telefónico de la persona (máx. 24 dígitos). s {OK} 5 {r}: Seleccione el grupo deseado. s {SELEC.} 2 veces s {OFF} L En el paso 3, puede cambiar el idioma de introducción de caracteres. ( s {r}: Seleccione el idioma deseado.
Guía Rápida Española Cómo usar dispositivos Bluetooth Copiado de entradas del directorio telefónico desde un teléfono celular con Bluetooth (transferencia del directorio telefónico) Puede copiar entradas del directorio telefónico desde los teléfonos celulares emparejados o desde otros teléfonos celulares (no emparejados) al directorio telefónico de la unidad. 1 Auricular: {MENU}(618 2 Auricular: Para copiar desde teléfonos celulares emparejados: {r}: Seleccione el teléfono celular deseado. s {SELEC.
Guía Rápida Española Cómo usar dispositivos Bluetooth Cómo usar un audífono Bluetooth (opcional) para llamadas por la línea terrestre Al emparejar un audífono Bluetooth con la unidad base, podrá tener conversaciones inalámbricas a manos libres para llamadas terrestres. L Solo se pueden usar 2 dispositivos Bluetooth con la unidad al mismo tiempo (por ejemplo, 2 líneas celulares o el audífono y 1 línea celular).
Guía Rápida Española Preguntas frecuentes Pregunta Causa y solución ¿Por qué aparece _? L El auricular está demasiado lejos de la unidad base. Acérquelo. L El adaptador para corriente de la unidad base no está conectado correctamente. Conecte de nuevo el adaptador para corriente a la unidad base. L El auricular no está registrado en la unidad base. Regístrelo. 1 Auricular: {MENU}(13) 2 Unidad base: Oprima y mantenga oprimido {LOCATOR} o {HANDSET LOCATOR} durante aproximadamente 5 segundos.
Appendix Customer services Shop Accessories! for all your Panasonic gear Go to hp://shop.panasonic.com/support Get everything you need to get the most out of your Panasonic products Accessories & Parts for your Camera, Phone, A/V products, TV, Computers & Networking, Personal Care, Home Appliances, Headphones, Baeries, Backup Chargers & more… Customer Services Directory For Product Informa!on, Opera!ng Assistance, Parts, Owner’s Manuals, Dealer and Service info go to hp://shop.panasonic.
Appendix Limited Warranty (ONLY FOR U.S.A.
Appendix Limited Warranty Limits and Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage.
Index Index # A B C D 3-way conference: 24, 29 Additional handset: 49 Alarm: 46 Answering calls: 22, 27 Answering system Call screening: 63 Erasing messages: 59, 60, 62 Greeting message: 58 Greeting only: 63 Listening to messages: 59, 62 New message alerting: 60 Number of rings: 63 Recording time: 63 Remote access code: 62 Remote operation: 62 Ring count: 63 Toll saver: 63 Turning on/off: 58 Auto intercom: 31 Auto talk: 22, 44 Baby monitor: 47 Battery: 11, 12 Bluetooth wireless technology Cellular phon
Index V W Temporary tone dialing: 23, 28 Time adjustment: 42 Transferring calls: 24, 29 Troubleshooting: 70 TTY: 91 VM (Voicemail): 65 Voice announcement language: 16 Voice paging: 30 Voicemail: 65 Volume Receiver: 21 Ringer (Base unit): 28, 40, 42 Ringer (Handset): 22, 40, 42 Speaker: 21, 27 Wall mounting: 66 95 TGE46x47x(en)_1117_ver061.
IMPORTANT! If your product is not working properly. . . 1 Reconnect AC adaptor to the base unit. 2 Check if telephone line cord is connected. 3 Use rechargeable Ni-MH batteries. (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.) 4 Read troubleshooting page in the Operating Instructions. Visit our Web site: http://shop.panasonic.com/support L FAQ and troubleshooting hints are available.