Operating Instructions Cordless Telephone with Digital Answering Machine Model No. KX-TGE632 KX-TGE633 KX-TG3834 KX-TGE645 KX-TG3845 Model shown is KX-TGE632. Before initial use, see “Getting Started” on page 10. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. Consulte “Guía Rápida Española”, página 63. For assistance, visit our Web site: http://shop.panasonic.com/support for customers in the U.S.A.
Table of Contents Introduction Caller ID Service Model composition .......................................3 Accessory information ..................................3 Graphical symbols for use on equipment and their descriptions ..........................................5 Using Caller ID service ...............................42 Caller list ....................................................42 Important Information For your safety .............................................
Introduction Model composition n KX-TGE630 series n KX-TGE640 series R Model shown is KX-TGE632. R Model shown is KX-TGE645. Base unit Handset Part No. Part No. KX-TGE632 KX-TGE630 KX-TGEA60 2 KX-TGE633 KX-TGE630 KX-TGEA60 3 KX-TG3834 KX-TGE630 KX-TGEA60 4 KX-TGE645 KX-TGE640 KX-TGEA60 5 KX-TG3845 KX-TGE640 KX-TGEA60 5 Series Model No. KX-TGE630 series KX-TGE640 series Quantity Accessory information Supplied accessories No.
Introduction *1 *2 *3 *4 *5 *6 KX-TGE632 KX-TGE633 KX-TG3834 KX-TGE645/KX-TG3845 See page 4 for replacement battery information. The handset cover comes attached to the handset. B A C D E F G Additional/replacement accessories Please contact your nearest Panasonic dealer for sales information (page 68). Accessory item Model number/Specifications Rechargeable batteries HHR-4DPA*1 R To order, please visit http://shop.panasonic.
Introduction Expanding your phone system Handset (optional): KX-TGEA60/KX-TGEA61 You can expand your phone system by registering optional handsets (6 max.) to a single base unit. R Optional handsets may be a different color from that of the supplied handsets. R Optional handsets (KX-TGEA61) have a different key print from that of the supplied handsets. R To order, please visit http:// shop.panasonic.
Important Information For your safety To prevent severe injury and loss of life/ property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R Use only the power source marked on the product. R Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock. R Completely insert the AC adaptor/power plug into the power outlet.
Important Information R This product is unable to make calls when: – the handset batteries need recharging or have failed. – there is a power failure. Battery R We recommend using the batteries noted on page 4. USE ONLY rechargeable Ni-MH batteries AAA (R03) size. R Do not mix old and new batteries. R Do not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed.
Important Information R If the reception for a base unit location is not satisfactory, move the base unit to another location for better reception. Environment R Keep the product away from electrical noise generating devices, such as fluorescent lamps and motors. R The product should be kept free from excessive smoke, dust, high temperature, and vibration. R The product should not be exposed to direct sunlight. R Do not place heavy objects on top of the product.
Important Information Specifications R Standard: DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0) R Frequency range: 1.92 GHz to 1.93 GHz R RF transmission power: 115 mW (max.) R Power source: 120 V AC, 60 Hz R Power consumption: Base unit: Standby: 1.0 W Maximum: 4.3 W Charger: Standby: 0.1 W Maximum: 1.8 W R Operating conditions: 0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 % relative air humidity (dry) For assistance, please visit http://shop.panasonic.
Getting Started n Charger Connect the AC adaptor to the power outlet. Setting up Connections n Base unit Connect the AC adaptor to the unit by pressing the plug firmly. Fasten the cord by hooking it. Connect the AC adaptor to the power outlet. Connect the telephone line cord to the unit, then to the single-line telephone jack (RJ11C) until you hear a click. A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service. Note: R Use only the supplied Panasonic AC adaptor PNLV226.
Getting Started Removing the battery Note when setting up Note for connections R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) R The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a horizontally oriented AC outlet that faces the floor, such as an AC outlet installed on a ceiling or under a table, as the weight of the adaptor may cause it to become disconnected.
Getting Started R You can set the unit to play a voice announcement when the battery is low or needs charging (page 15). Ni-MH battery performance (supplied batteries) Operation Operating time In continuous use 10 hours max.*1 Not in use (standby) *1 5 days Controls Handset B A K max.*1 If eco mode is on. Note: R Actual battery performance depends on usage and ambient environment.
Getting Started Ringer indicator Message indicator Belt clip holes Speaker MjN/MkN (VOL.
Getting Started Display icons Base unit display item Item Handset display items Item Meaning “Greeting only” is selected. Caller messages are not recorded. (page 49) Meaning Within base unit range Out of base unit range The line is in use. R When flashing: The call is on hold. R When flashing rapidly: An incoming call is now being received. Eco mode is on. (page 12) Noise reduction is set. (page 18) Equalizer is set. (page 18) Z Speakerphone is on. (page 16) Ringer volume is off.
Getting Started 6 MSAVEN a MOFFN Note: R When English is selected as the display language, 12-hour clock format is used. When Spanish is selected, 24-hour clock format is used. Recording your greeting message You can record your own greeting message instead of using a pre-recorded greeting message. See page 44 for details. 1 2 3 MMENUN#302 MbN: “Yes” a MSELECTN Record a greeting message.
Making/Answering Calls Making calls Using the handset 1 Lift the handset and then dial the phone number. R To correct a digit, press MCLEARN. 2 N to make the call. Press M R To make the call using the speakerphone, press MZN. 3 When you finish talking, press MOFFN or place the handset on the base unit or charger. Note: R To switch to the speaker, press MZN. To switch back to the receiver, press MZN/ N. M R In step 1, you can store the dialed phone number to the phonebook by pressing MSAVEN.
Making/Answering Calls One-touch ringer off for the handset Answering calls Using the handset When a call is being received, the ringer indicator flashes rapidly. 1 Lift the handset and then press M M N when the unit rings. N or Press and hold 0 ( ) until the unit beeps to turn the ringer off. While the ringer is turned off, the handset will not ring for calls.
Making/Answering Calls Note: R MMUTEN is a soft key visible on the display during a call. Base unit*1 *1 KX-TGE640 series: page 3 1 Press MMUTEN during a call. R The SP-PHONE indicator flashes. 2 To return to the call, press MMUTEN. Note: R Please contact your phone service provider for details and availability of this service in your area.
Making/Answering Calls R This feature is not available while using the speakerphone. R When both the “Equalizer” setting and is noise reduction are activated, shown on the display. 5 To complete the transfer: Press MOFFN. To establish a conference call: MMENUN a MbN: “Conference” a MSELECTN R To leave the conference, press MOFFN. The other 2 parties can continue the conversation.
Making/Answering Calls Handset locator You can locate a misplaced handset by paging it. 1 Base unit: Press MLOCATORN or MHANDSET LOCATORN. R All registered handsets beep for 1 minute. 2 To stop paging: Base unit: Press MLOCATORN or MHANDSET LOCATORN. Handset: n KX-TGE630 series: page 3 Press MOFFN. n KX-TGE640 series: page 3 N, then press MOFFN.
Making/Answering Calls 2 MbN: Select the desired unit or “Voice paging”. a MSELECTN R If you select “Voice paging”, speak into the microphone after the beep. Your voice will be heard using the speakers of the base unit*1 and all handsets, until a paged party answers your page or until you press MOFFN. After the other party answers, the speakerphone mode is turned on. 3 *1 When you finish talking, press MOFFN.
Making/Answering Calls Ni-MH battery performance (supplied batteries) during power backup mode When the batteries are fully charged, operating time of the handset in power backup mode varies depending on usage. – Continuous use of the handset in power backup mode: 1 hour max. – Continuous use of the handset other than a handset in power backup mode: 1.5 hours max. – Not in use in power backup mode: 1.5 hours max.
Call Block Call block You can press the MCALL BLOCKN button in the following situations to disconnect the current call and add a phone number to the call block list: – when an incoming call is being received – when an incoming call is being recorded by the answering system – when talking on an outside call Once a phone number has been added to the call block list, the unit will block calls from that phone number in the future. 1 Press MCALL BLOCKN under the situations shown above.
Call Block Storing a range of number 1 2 3 4 5 MCALL BLOCKN MbN: “Call block” a MSELECTN MbN: “Block range of numbers” a MSELECTN MMENUN a MbN: “Add” a MSELECTN Enter the desired number (2-8 digits). a MSAVEN a MOFFN Blocking incoming calls that have no phone number You can block calls when no phone number is provided, such as private callers or out of area calls. 1 2 3 4 MCALL BLOCKN MbN: “Call block” a MSELECTN MbN: “Block unknown CID” a MSELECTN MbN: Select the desired setting.
Automated call block Automated call block With automated call block, the unit screens incoming calls before ringing for allowed calls, or ends the calls without ringing for calls identified as robocalls, telemarketing calls, or other undesirable calls (Caller ID subscribers only). The unit will play the greeting message for automated call block and prompt the caller to enter an access code in order for the unit to identify whether the call is automated. You can set the unit to block or unblock mode.
Automated call block 2 3 4 MbN: “Access code” a MSELECTN Erasing all entries MCLEARN 1 2 3 4 Enter the new access code. a MSAVEN a MOFFN Displaying and clearing the blocked call count The total number of blocked calls (up to 65,000) will be displayed. 1 2 3 4 MCALL BLOCKN a MSELECTN MbN: “Blocked calls count” a MSELECTN R To exit, press MOFFN.
Automated call block Resetting to the pre-recorded greeting message for automated call block This procedure will erase your greeting message for automated call block and reset to the pre-recorded one. 1 2 3 4 MCALL BLOCKN a MSELECTN MbN: “Automated call greeting” a MSELECTN MbN: “Pre-recorded” a MSELECTN MYESN a MOFFN Playing back the greeting message for automated call block 1 2 3 4 MCALL BLOCKN a MSELECTN MbN: “Automated call greeting” a MSELECTN MbN: “Check greeting” a MSELECTN To exit, press MOFFN.
Phonebook character is fixed and the cursor moves to the next space. Phonebook You can add 100 names (16 characters max.) and phone numbers (24 digits max.) to the phonebook, and assign each phonebook entry to the desired group (page 28). Important: R All entries can be shared by any registered handset. Adding phonebook entries 1 2 3 4 5 MFN W a MMENUN MbN: “Add new entry” a MSELECTN Enter the party’s name. a MOKN Enter the party’s phone number. a MOKN MbN: Select the desired group.
Phonebook Changing group names/setting ringer ID The default group name is “Group 1” to “Group 9”. 1 2 3 4 5 3 Erasing entries Erasing an entry MbN: “Group” a MSELECTN 1 2 3 MbN: Select the desired group. a MSELECTN To change group names MbN: “Group name” a MSELECTN a Edit the name (10 characters max.). a MSAVEN To set group ringer tone MbN: Select the current setting of the group ringer tone. a MSELECTN a MbN: Select the desired ringer tone.
Phonebook Viewing an entry/Making a call Speed dial You can assign 1 phone number to each of the dial keys (1 to 9) on the handset. 1 Press and hold the desired speed dial key (1 to 9). 2 To make a call, press M N. Adding phone numbers to speed dial keys n By entering phone numbers: 1 Press and hold the desired speed dial key (1 to 9). a MADDN 2 3 4 MbN: “Manual” a MSELECTN Enter the party’s name (16 characters max.). a MOKN Enter the party’s phone number (24 digits max.).
Programming Menu list To access the features, there are 2 methods. n Scrolling through the display menus 1 MMENUN 2 3 4 Press MCN or MDN to select the desired main menu. a MSELECTN Press MCN or MDN to select the desired item from the next sub-menus. a MSELECTN Press MCN or MDN to select the desired setting. a MSAVEN n Using the direct command code 1 MMENUN a Enter the desired code. Example: Press MMENUN#101. 2 Select the desired setting. a MSAVEN Note: R To exit the operation, press MOFFN.
Programming Sub-menu 1 Sub-menu 2 Settings Code New message alert*1 Outgoing call – On/Off On #338 46 Outgoing call – Notification to Settings Outgoing call – Remote code Activate Base unit beep On #339 46 Ring count*1 Toll saver 2-7 rings <4 rings> #211 49 Recording time*1 <3 min> 1 min Greeting only*2 #305 49 Remote code*1 <111> #306 48 Screen call – Handset Off #310 49 Screen call – Base unit*1, *3 Off #G310 49 Answer on*1 Answer of
Programming Main menu: “Speed dial” Operation Code Viewing the speed dial entry.
Programming Sub-menu 1 Sub-menu 2 Settings Code Talking caller ID Handset Off #162 Base unit*1 On #G162 Off Every 3 hours Every 6 hours #176 15 Detector1 #6561 – Detector2*9 #6562*9 Detector3*9 #6563*9 Detector4*9 #6564*9 Low battery alert Key detector setting*7 – 1: Add new device (for Detector1)*8 – 2: Add new device (for Detector2) – 3: Add new device (for Detector3) – 4: Add new device (for Detector4) – Change name*1 Registration – #6571 42 – #6572
Programming Sub-menu 1 Sub-menu 2 Speed dial – – #261 30 Cell locator – – #248 20 Record greeting*1 – – #302 44 – #331 50 Off #332 50 Voicemail Settings Save VM access#*1 (VM: Voicemail) VM tone detect*1 Code Message indicator – Off #340 49 LCD contrast (Display contrast) – Level 1–4 <2> #145 – Handset name – Display name – Auto intercom #104 40 On – #105 40 Handset On #273 21 Base unit*1, *3 On #G273 Key tone – Off #
Programming Sub-menu 1 Sub-menu 2 – Call sharing*1 Registration Main menu: Code #194 Register handset – #130 41 – #131 41 Off #152 21 Display Español #110 14 Announcement*1 Español #112 14 – “Customer support” Operation Code Displaying customer support Web address.
Programming *7 This setting is available when you have the key detector (KX-TGA20). Read the installation manual for more information on the key detector. *8 For models with supplied key detectors, the display shows “1: Detector1”. *9 If you register 2 or more key detectors. *10 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature. *11 The flash time depends on your telephone exchange or host PBX.
Programming Silent mode Handset / Base unit*1 *1 KX-TGE640 series: page 3 Silent mode allows you to select a period of time during which the handset and/or base unit will not ring for outside calls. This feature is useful for time periods when you do not want to be disturbed, for example, while sleeping. Silent mode can be set for each unit. Using the phonebook’s group feature (page 28), you can also select groups of callers whose calls override silent mode and ring the unit (Caller ID subscribers only).
Programming recommend leaving the monitored handset on the base unit or charger. R The monitored handset never rings while it is being monitored. If the base unit is placed near the monitored handset, we recommend turning off the base unit ringer volume (page 17). Setting the baby monitor Perform the setting operation with the handset to be monitored (for example, the handset placed in a baby’s room).
Programming Erasing an outside monitoring number 1 Press MMENUN on the handset being monitored. 2 3 4 5 6 MbN: “On/Off” a MSELECTN MbN: “On” a MSELECTN MbN: Select the outside line. n When monitoring from outside: Answer the call. If you want to respond from your monitoring phone, press #1 using tone dialing. You can turn off the baby monitor feature by pressing #0. Note: R The unit disconnects the call automatically after 2 minutes.
Programming Registering a handset to the base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, re-register the handset. 1 Handset: MMENUN#130 2 Base unit: Press and hold MLOCATORN or MHANDSET LOCATORN for about 5 seconds. R If all registered handsets start ringing, press MLOCATORN or MHANDSET LOCATORN again to stop, then repeat this step. 3 Handset: Press MOKN, then wait until a long beep sounds.
Caller ID Service Using Caller ID service Important: R This unit is Caller ID compatible. To use Caller ID features, you must subscribe to a Caller ID service. Contact your phone service provider for details. Caller ID features When an outside call is being received, the caller information is displayed. Caller information for the last 50 callers is logged in the caller list from the most recent call to the oldest.
Caller ID Service Editing a caller’s phone number You can edit a phone number in the caller list by removing its area code and/or the long distance code “1”. 1 2 3 4 5 MCN CID MbN: Select the desired entry. a MMENUN MbN: “Edit” a MSELECTN 3 MERASEN a MbN: “Yes” a MSELECTN a MOFFN Erasing all caller information 1 2 MCN CID MERASEN a MbN: “Yes” a MSELECTN a MOFFN Press MEDITN repeatedly until the phone number is shown in the desired format.
Answering System Answering system The answering system can answer and record calls for you when you are unavailable to answer the phone. You can also set the unit to play a greeting message but not to record caller messages by selecting “Greeting only” as the recording time setting (page 49). Important: R Make sure the unit’s date and time setting is correct (page 14). Memory capacity (including your greeting message) The total recording capacity is about 17 minutes.
Answering System Resetting to a pre-recorded greeting message Use this procedure to erase your greeting message and use a pre-recorded one. 1 2 Key Operation MERASEN Erase currently playing message *1 MMENUN#304 MYESN a MOFFN If pressed within the first 5 seconds of a message, the previous message is played. Erasing all messages Playing back the greeting message Press MERASEN 2 times while the unit is not in use. 1 2 Using the handset MMENUN#303 To exit, press MOFFN.
Answering System Key Operation 76 Record greeting message 8 Turn answering system on MPAUSEN Pause message*2 9 or MSTOPN Stop recording Stop playback 0 Turn answering system off *4*3 Erase currently playing message *5 Erase all messages *6 Reset to a pre-recorded greeting message *1 *2 *3 If pressed within the first 5 seconds of a message, the previous message is played.
Answering System n By entering a phone number: 1 MMENUN#338 2 3 4 5 MbN: “Notification to” a MSELECTN a MADDN MbN: “Manual” a MSELECTN Enter the desired name (16 characters max.). a MOKN Enter the desired number (24 digits max.). a MOKN a MSELECTN a MOFFN Turning on/off the new message alert setting 1 2 3 MMENUN#338 MbN: “On/Off” a MSELECTN MbN: Select the desired setting.
Answering System Remote access code A 3-digit remote access code must be entered when operating the answering system remotely. This code prevents unauthorized parties from listening to your messages remotely. The default setting is “111”. Important: R To prevent unauthorized access to this product, we recommend that you regularly change the remote code. 1 2 MMENUN#306 Enter the desired 3-digit remote access code.
Answering System Answering system settings Call screening Handset / Base unit*1 *1 KX-TGE640 series: page 3 While a caller is leaving a message, you can listen to the call through the unit’s speaker. To adjust the speaker volume, press MjN or MkN repeatedly. N on You can answer the call by pressing M the handset or MZN on the base unit*1. Call screening can be set for each unit. The default setting is “On”.
Useful Information Voicemail service In addition to your unit’s answering system you may also have voicemail service from your phone service provider. Voicemail is an answering service that may be offered by your phone service provider. This service can also record calls when you are unavailable to answer the phone or when your line is busy. Messages are recorded on the phone company system and not on the unit’s answering system.
Useful Information Listening to voicemail messages When new messages have been recorded: – “Voicemail msg. via phone co.” is displayed if message indication service is available. – The message indicator on the handset flashes slowly if the message indicator is turned on (page 49). Handset 1 MMENUN#330 R The speakerphone turns on. 2 3 Follow the pre-recorded instructions. Wall mounting Note: R Make sure that the wall and the fixing method are strong enough to support the weight of the unit.
Useful Information 3 Insert the hooks on the wall mounting adaptor into holes (1) and (2) on the base unit. 1 2 R This product is compliant with the following wall phone plate sizes (2 types). 2 83 mm (3 1/4 inches) 3 102 mm (4 inches) Fit the slots of the unit onto the corresponding wall phone plate tabs for (4) and (5) respectively. 1 2 1 4 4 5 Adjust the adaptor to hold the base unit, then push it in the direction of the arrow until it clicks into place.
Useful Information To remove the wall mounting adaptor While pushing down the release levers (A), remove the adaptor (B). A A B Charger Drive the screws (1) (not supplied) into the wall. 2 27.2 mm (1 1/16 inches) 2 1 For assistance, please visit http://shop.panasonic.com/support KX-TGE63x_64xUSA_(en)_1213_ver031.
Useful Information Error messages Display message Cause/solution Ask phone company for VM access # R You have not stored the voicemail access number. Store the number (page 50). Main unit no power or No link. Reconnect base AC adaptor. or No link. R Confirm the base unit’s AC adaptor is connected to the unit and the power outlet correctly. R The handset has lost communication with the base unit. Move closer to the base unit and try again. R Unplug the base unit’s AC adaptor to reset the unit.
Useful Information Troubleshooting If you still have difficulties after following the instructions in this section, disconnect the base unit’s AC adaptor, then reconnect the base unit’s AC adaptor. Remove the batteries from the handset, and then insert them into the handset again. General use Problem Cause/solution The handset does not turn on even after installing charged batteries. R Place the handset on the base unit or charger to turn on the handset. The unit does not work.
Useful Information Problem Cause/solution I cannot register a handset to a base unit. R The maximum number of handsets (6) is already registered to the base unit. Cancel unused handset registrations from the base unit (page 41). Battery recharge Problem Cause/solution The handset beeps and/or flashes. R Battery charge is low. Fully charge the batteries (page 11). I fully charged the batteries, but – still flashes, – is displayed, or – the operating time seems to be shorter.
Useful Information Problem Cause/solution I cannot make or answer a call. R An outside line is being used after a cell locator feature is used. – KX-TGE630 series: To end the call, press MLOCATES CELLN on the base unit. – KX-TGE640 series: To end the call if someone answers using the cellular phone, press MZN on the base unit. I cannot make long distance calls. R Make sure that you have long distance service. I cannot use voice paging. R You cannot use voice paging if other units are in use.
Useful Information Problem Cause/solution I cannot dial the phone number edited in the caller list. R The phone number you dialed might have been edited incorrectly (for example, the long distance “1” or the area code is missing). Edit the phone number with another pattern (page 43). Time on the unit has shifted. R Incorrect time information from incoming Caller ID changes the time. Set the time adjustment to “Manual” (off) (page 33).
Useful Information Voicemail Problem Cause/solution “Voicemail msg. via phone co.” is shown on the handset display. How do I remove this message from the display? R This notification is displayed when your phone service provider’s voicemail service (not the unit’s answering system) has recorded a message for you. Typically you can remove this notification from the display by listening to the message.
Useful Information FCC and other information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ----------. If requested, this number must be provided to the telephone company. L Registration No.............(found on the bottom of the unit) L Ringer Equivalence No. (REN).......0.
Useful Information manufacturer about the availability of Hearing Aids which provide adequate shielding to RF energy commonly emitted by digital devices. WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO EMERGENCY NUMBERS: 1) Remain on the line and briefly explain to the dispatcher the reason for the call. 2) Perform such activities in the off-peak hours, such as early morning or late evenings. This device complies with Part 15 of the FCC Rules.
Useful Information Compliance with TIA-1083 standard: Telephone handsets identified with this logo have reduced noise and interference when used with T-Coil equipped hearing aids and cochlear implants. Compatible with Hearing Aid T-Coil T TIA-1083 62 For assistance, please visit http://shop.panasonic.com/support KX-TGE63x_64xUSA_(en)_1213_ver031.
Guía Rápida Española Guía Rápida Española Conexiones Unidad base 1 Conecte el adaptador de corriente alterna a la unidad presionándolo firmemente. 2 Enganche el cable para fijarlo. 3 Conecte el adaptador de corriente alterna a la toma de corriente. 4 Conecte el cable de la línea telefónica a la unidad, y después a la toma telefónica de una sola línea (RJ11C) hasta que escuche un clic. 5 Se requiere un filtro DSL/ADSL (no incluido) si tiene este tipo de servicio.
Guía Rápida Española Instalación y carga de la batería Cargue aproximadamente durante 7 horas. 2 4 3 2 1 1 Nota: L UTILICE SOLO baterías recargables de Ni-MH tamaño AAA (R03) ( 1 ). L NO utilice baterías alcalinas, de manganeso ni de Ni-Cd. L Confirme que las polaridades estén correctas (S, T). L Cambie el idioma de la pantalla. L Confirme que aparezca “Cargando” ( 2 ). Retire la batería 1 64 2 Para obtener ayuda, visite http://shop.panasonic.
Guía Rápida Española Sugerencias de operación Teclas de función KX-TGE630 KX-TGE640 Al oprimir una tecla de función, puede seleccionar la función que aparece directamente encima de ella en la pantalla. Preste atención a la pantalla para ver qué funciones están asignadas a las teclas de función durante la operación. Tecla de volumen Oprima {+} o {-} repetidamente: − ajustar el volumen del timbre. − ajustar el volumen del receptor o del altavoz mientras habla.
Guía Rápida Española Operaciones básicas Cómo hacer y contestar llamadas (Auricular) Para hacer llamadas Marque el número telefónico. s {C}/{s} Para contestar llamadas {C}/{s} Para colgar {OFF} Para ajustar el volumen del receptor o del altavoz Oprima {+} o {-} repetidamente mientras habla. Cómo hacer una llamada usando la lista de remarcación {>} REDIAL s {r}: Seleccione la entrada deseada.
Guía Rápida Española Operaciones básicas Sistema contestador de llamadas (Unidad base) Contestador encendido/ apagado Oprima {ANSWER ON/OFF} para encender y apagar el contestador de llamadas. Para escuchar mensajes {P} (PLAY) Sistema contestador de llamadas (Auricular) Para escuchar mensajes Para escuchar mensajes nuevos: {REPROD.
Appendix Customer services Shop Accessories! for all your Panasonic gear Go to hp://shop.panasonic.com/support Get everything you need to get the most out of your Panasonic products Accessories & Parts for your Camera, Phone, A/V products, TV, Computers & Networking, Personal Care, Home Appliances, Headphones, Baeries, Backup Chargers & more… Customer Services Directory For Product Informa!on, Opera!ng Assistance, Parts, Owner’s Manuals, Dealer and Service info go to hp://shop.panasonic.
Appendix Limited Warranty (ONLY FOR U.S.A.
Appendix Limited Warranty Limits and Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage.
Index Index # A B C D E 3-way conference: 19 Additional handset: 40 Alarm: 37 Answering calls: 17 Answering system Call screening: 49 Erasing messages: 45, 46, 48 Greeting message: 44 Greeting only: 49 Listening to messages: 45, 48 New message alerting: 46 Number of rings: 49 Recording time: 49 Remote access code: 48 Remote operation: 47 Ring count: 49 Toll saver: 49 Turning on/off: 44 Auto intercom: 21 Auto talk: 17, 35 Automated call block: 25 Baby monitor: 38 Battery: 10, 11 Call block: 23 One ring
IMPORTANT! If your product is not working properly. . . 1 Reconnect AC adaptor to the base unit. 2 Check if telephone line cord is connected. 3 Use rechargeable Ni-MH batteries. (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.) 4 Read troubleshooting page in the Operating Instructions. Visit our Web site: http://shop.panasonic.com/support L FAQ and troubleshooting hints are available.