Operation Manual

R During a conversation in hands-free mode with the handset on the charger, lift the handset off its
char
ger.
[KX-TPA65]
During a conversation in hands-free mode, go off-hook.
Answering an Intercom Call
1. KX-
TPA60:
: Answer the page.
KX-TP
A65:
Off-hook: Answer the page.
Silent Mode
Silen
t Mode turns off the ringer when calls are received. This can be useful in situations where you do not
want to be disturbed, such as during a meeting.
When Silent Mode is active, the following features are turned off or set as specified automatically,
regardless of their settings.
– Ringer Volume
– Ring On Charger
*1
– Auto Answer
– Key Tone
*1 KX-TPA60 only.
Note
R When Silent Mode is set, the Low Battery Alarm will not be heard in standby mode.
R When Silent Mode is set, confirmation tones for setting the ring pattern or ring volume will not play.
To set or cancel
1. KX-TPA60:
Press and hold
for more than 2 seconds.
KX-TP
A65:
Press and hold
for more than 2 seconds.
Noise Reduction/Voice Clarity (KX-TPA60 only)
When
Noise Reduction is enabled, environmental noise is reduced to improve and maintain sound
quality for the other party in the conversation. Receiver volume is also increased according to the level of
environmental noise. It is useful in noisy environments such as warehouses, manufacturing plants,
restaurants, and garages. Noise Reduction can be enabled by default for regular use, or toggled on/off
during a call.
Note
R Noise Reduction can be used only in receiver mode or with a headset. It cannot be used in Hands-free
mode.
R During a conversation in Noise Reduction mode, either the
/
AVC
soft key will blink, or "Noise
Reduc
tion" will be displayed on the LCD.
54
Receiving Calls