Operation Manual

10.To select a default number for the entry, press [D] or [C] t
o select "Default TEL No" a
OK
11.[D]/[C]: Select the number to use as the default number. a
OK
12.
SAVE
Note
R Steps
8 and 9 can be omitted if you do not want to assign a category.
R Steps 10 and 11 can be omitted if you do not want to assign a default number. (The first number
entered for an entry will automatically be assigned as the default number.)
R The valid digits are "0" through "9", "G", "B", "J", "P".
R If an item with the same name and number exists, the new information added will be merged with the
existing item.
R To enter characters, see “Entering Characters”, Page 44.
R When connected to a base unit other than the KX-TGP600, a menu to select the save destination of
the phonebook is displayed between steps 3 and 4.
Editing a Stored Item in the Handset Phonebook
Editing a Stored Item
[In s
tandby mode]
1.
2. [D]/[C]: "Phonebook" a
OK
*1
3. Ent
er the name or the first character(s) of the desired name. a
OK
4. [D]/[C]: Select the desired item. a /
MENU
5. [D]/[C]: "Edit" a
OK
6. [D]/[C]: Select the desired name, phone number, category or default telephone number. a
OK
7. Edit the data as necessary. a
OK
8. Repeat step 6 to 7 and edit the items you want to change.
9.
SAVE
*1 If only Handset Phonebook is permitted, this step is skipped.
N
o
t
e
R T
o
change a character or digit.
1. Press [F] or [E] to highlight a character or digit.
2. Delete the character or digit.
KX-TPA60:
/ /[XFER/CLR]
K
X
-
T
P
A65:
/ /[TRANSFER/CLEAR]
3
.
E
n
t
er the new character or digit.
R To clear an entire line.
KX-TPA60:
Press and hold
/ /[XFER/CLR] for more than 1 second.
K
X
-
T
P
A65:
Press and hold
/ /[TRANSFER/CLEAR] for more than 1 second.
R T
o m
o
ve the cursor to the left or right, press [F] or [E], respectively.
R For details about entering characters, see “Entering Characters”, Page 44.
65
Using the Phonebook