Operation Manual

Main Item Sub Item Page
System Settings Register H/S Cancel Register Change Base PIN Page 100
Set Time & Date Repeater Mode MultilineSetting
Authentication Access Code Xsi Setting
UC Setting Parallel Setting
Call Settings FWD/DND Block Anonymous Anonymous Call Page 101
Block Caller ID Anywhere Remote Office
SimultaneousRing
Block Anonymous Calls (when connected to the KX-TGP600 only)
This
feature allows the unit to reject calls when the unit receives a call without phone number. The default
setting is “Off”.
IMPORTANT
R We recommend setting with your administrator. Contact your administrator for further information.
R This feature is not available on shared lines.
1.
/
MENU
2. [D]/[C]/[F]/[E]
:
a
OK
3. [D]/[C]: "Call Settings" a
OK
4. [D]/[C]: "Block Anonymous" a
OK
5. [D]/[C]: Select a desired line. a
OK
6. [D]/[C]: "On"/"Off" a
OK
Incoming Call Barring (Caller ID service users only)
This
feature allows the unit to reject calls from specified phone numbers that you do not want to answer
such as junk calls.
When a call is received, the unit does not ring while the caller is being identified. If the phone number
matches an entry in the call barred list, the unit rejects the call.
Storing unwanted callers (when connected to the KX-TGP600 only)
You c
an store up to 20 phone numbers per line in the call barred list by using the caller list or by entering
the numbers directly.
1.
/
MENU
2. [D]/[C]/[F]/[E]
:
a
OK
3. [D]/[C]: "Call Settings" a
OK
4. [D]/[C]: "Block Caller ID" a
OK
5. [D]/[C]: Select a desired line. a
OK
6. [D]/[C]: Select a blank line. a
OK
7. Enter the phone number (32 digits max.). a
OK
76
Customizing the Telephone