Operation Manual

*1 KX-UDT series are not available for KX-TGP600LA, KX-TGP600LC, KX-TGP600AG or
KX-TG
P600BR.
Handset/desk phone registration using the base unit
When adding a new handset/desk phone:
1. Base unit:
a. Press and hold the handset locator button for about 3 seconds.
The STATUS indicator on the base unit will flash red (slow flashing).
2. Unregistered handset/desk phone:
[When adding a new handset/desk phone]
R Easy registration
In standby mode, press and hold
OK
until displaying "Please Wait…".
After
"Registered" displayed on the LCD, the registration is completed.
From step a to step e can be skipped.
[When registering a handset/desk phone to another base unit]
R Normal registration
a.
/
MENU
b. [D]
/[C]
/[F]
/
[E]
:
a
OK
c. [D]/[C]: "System Option" a
OK
d. [D]
/[C]
: "Register H/S" a
OK
e. Select a base unit. a
OK
After "Registered" is displayed on the LCD, the registration is completed.
R If 4
base units have been registered to a handset/desk phone, "Memory Full" is displayed on the LCD
at step d.
Handset/desk phone registration using the handset/desk phone
If op
eration using the base unit is difficult, or if you want to specify the handset/desk phone number
during registration, you can use a registered handset/desk phone to add new handsets/desk phones.
Before operating the handset/desk phone, confirm that the STATUS indicator of the base unit is Green
(On/Slow Flashing/Quick Flashing).
1. Registered handset/desk phone:
a.
/
MENU
b. [D]/[C]/[F]/[E]
:
a
OK
c. [D]/[C]: "System Settings" a
OK
d. [D]/[C]: "Register H/S" a
OK
e. Select a handset/desk phone. a
OK
If more than 5 handsets/desk phones are registered, you can press
NEXT
to scroll down.
The S
TATUS indicator on the base unit will flash red (slow flashing).
2. Unregistered handset/desk phone:
Follow the procedure from step 2 above with the handset/desk phone you want to add.
Deregistering a Handset/Desk Phone
A han
dset/desk phone can cancel its own registration (or the registration of another handset/desk phone)
that is stored to the base unit. This allows the handset/desk phone to end its wireless connection with the
system.
1. Handset/desk phone:
86
Installation and Setup