Operation Manual

System Setting Menu Layout (when connected to the KX-TGP600)
Status
Sub Item Description Setting Default
Line Status Displays the line status.
Registered
*1
/Reg
istering
*1
/
(NULL)
—
Firmware Version Selects which is shown on the
displ
ay the model number and
the firmware version.
–Base Station
–Handset
—
IP Mode Displays the IP network mode. IPv4/IPv6/IPv4&IPv6 —
IPv4 Settings Displays the information about
IPv4
settings.
–IP Address
*2
–Sub
net Mask
*2
–Default Gateway
*2
–DNS
*2
—
IPv6 Settings Displays the information about
I
Pv6
settings.
–IP Address
*3
–Pre
fix
*3
–Default Gateway
*3
–DNS
*3
—
MAC Address Displays the MAC address of
t
he b
ase unit.
— —
LLDP Displays the LLDP status. On/Off —
CDP Displays the CDP status. On/Off —
VLAN Displays the VLAN ID and
p
r
i
o
r
ity.
— —
*1
If yo
u select this item and press
OK
, the phone number of the selected line is displayed.
*2 If
this item is not set, "0.0.0.0" is displayed. If the base unit does not connect to the Ethernet, "…" is
displayed.
*3 If this item is not set, "0::0" is displayed. If the base unit does not connect to the Ethernet, "::" is
displayed.
Network Settings
Sub Item Description Setting Default
IP Mode Select Changes the network settings
of th
e base unit. Current
settings are displayed as a
highlight.
–IPv4
–IPv6
–IPv4&IPv6
IPv4
98
Appendix