Operating Manual

3. Use [ ][ ] to select "Enhancement" and press
[Enter].
• The software enhancement screen is
displayed.
Note
• Features that have already been activated
are displayed in "Activated Features", as
follows:
– "4-Point Connection": The feature for
making multiple
-party video conference
calls is enabled (KX-VC300 only).
– "1080 Full HD": The feature for sending
images in Full HD resolution is enabled
(KX-VC300 only).
– "None": No features have been activated.
4. Press [G].
• The registration key input screen is displayed.
5. Enter the 16-digit registration key.
6. Press [G].
• A
dialogue box to confirm the saving of settings
and system restart after saving is displayed.
7. Use [
][ ] to select "Yes" and press [Enter].
• The system will automatically restart to reflect
changes to system settings.
Note
• If
the registration key you entered is invalid,
"Failed Registration Key code
authentication." is displayed. Repeat the
procedure from step 5. If this message is
displayed even when you have correctly
input the registration key that was issued,
contact your dealer.
• Only one registration key can be registered
at once. To register multiple registration
keys for enabling multiple features, a restart
is necessary for each registration.
• Activated features can also be checked on
the enhanced feature confirmation screen
(Page 108).
Updating Software
Note
• If you want to update software using a USB
memory device, consult your dealer.
• When updating software using a USB memory
device, note the following.
– Save the software update file in the root
directory of the USB memory device.
– Do not change the name of the software
update file.
– Connect the USB memory device to the
USB jack on the back of the unit ahead of
time.
– To
update the software, make sure you are
using version 3.0 or later.
1. Log in to the administrator menu (Page 112).
• The administrator menu screen is displayed.
2. When using IP mode:
Press [
] three times.
• The fourth page is displayed.
When using NAT Traversal mode:
Press [ ] twice.
• The third page is displayed.
128 User Manual Document Version 2013-09
Contacts and Settings