Operating Manual

Recalling a Registered Preset
During a video conference call, you can set your own video camera
’s direction, zoom and magnifier settings,
etc., to the desired state by selecting a registered preset.
Note
• For details about compatible video camera models, contact your dealer.
• You
can recall a preset that was set by the other party for the other party’s video camera during a video
conference call.
1 Press [CAM Ctrl].
• The site selection dialogue box is displayed.
Note
• After
the site selection dialogue box is displayed,
if no operations are performed within
approximately 3 seconds, the dialogue box will
disappear.
2
Use [ ][ ] to select "Local Site" and press [Enter].
• The camera control screen is displayed.
3 Press a numeric button (1–9) to select the preset
number that you want to recall.
• The direction and zoom of your video camera will
change to that of the registered preset.
Document Version 2013-09 User Manual 67
Controlling a Video Camera