Operating Instructions

6.1 Recording your greeting
message
The unit has 2 pre-recorded greeting messages for TAM/
FAX mode. If you record your own greeting message, it
will be played instead of the pre-recorded greeting
message when a call is received.
The maximum recording time of your greeting message
is either 16 seconds (default) or 60 seconds. We
recommend you record a message of less than 12
seconds to make it easier to receive faxes.
Make sure feature #77 is set to “TAM/FAX” beforehand
(page 44).
Important:
R When callers leave messages, the unit records
the day and time of each message. Make sure the
date and time have been set correctly (page 19).
1 MGREETING RECN
R A long beep will sound.
2 Speak clearly about 20 cm away from MMICN.
3 When finished recording, press MSTOPN.
Note:
R You can change the maximum TAM/FAX greeting
message time to 60 seconds (feature #54 on
page 43).
– If you change the setting to 60 seconds, we
recommend that you tell the caller in your TAM/
FAX greeting message to press G9 before
starting the fax transmission.
– If you change the setting from 60 seconds to 16
seconds, your current greeting message will be
deleted. The pre-recorded greeting message will
be played when a call is received.
R If you change the maximum recording time of
incoming messages to “GREETING ONLY” (feature
#10 on page 39), the unit will answer a call with your
current greeting message, and then hang up.
Re-record your greeting message to inform the caller
that the unit will not record any incoming messages.
To check the greeting message
Press MGREETING CHECKN.
R The unit will play the greeting message.
6.1.1 Erasing your recorded greeting
message
1 MGREETING CHECKN
R To cancel erasing, press MSTOPN.
2 MERASEN
Note:
R If you erase your TAM/FAX greeting message, the
pre-recorded greeting message will be played when
a call is received.
6.2 Listening to recorded
messages
When the unit has recorded new voice messages:
– The MAUTO ANSWERN indicator will flash when auto
answer is turned ON.
– The total number of recorded messages will flash on
the base unit display.
6.2.1 To play back messages
Press MPLAYBACKN.
R Only new messages will be played.
R After playing back all of the new messages, the
MAUTO ANSWERN indicator will stop flashing but will
remain lit up when auto answer is turned ON. If you
press MPLAYBACKN at this time, all the recorded
messages will be played.
6.2.2 Useful features during playback
To repeat a message
Press MFN while listening to the message.
R If you press MFN within 5 seconds of the beginning of
the message, the previous message will be played.
R To play back a specific message, press MFN or MEN
and search for the message you want to listen to.
To skip a message
Press MEN to play the next message.
Voice time/day stamp
During playback, the unit will announce the day of the
week and time that each message was recorded.
If you subscribe to Caller ID service
During playback, you can call back the displayed name
or number using the base unit.
1. Press MMENUN during playback.
R The base unit stops playback.
R If you do not need to edit the telephone number,
skip to step 3.
2. Edit the telephone number (page 25).
3. KX-FC278:
Lift the handset or press MSP-PHONEN.
KX-FC268:
MSP-PHONEN
6.2.3 Erasing recorded messages
To erase a specific message
Press MERASEN while listening to the message you want
to erase.
To erase all messages
1. MERASEN
35
6. . Answering Machine
6. Answering Machine