Operating Instructions

Feature Selection
Receiving oversized
documents
MBNM3NM6N
If the size of the document sent by the other party is as large as or larger than
the recording paper, the unit can reduce the document and print it. Select the
desired reduction rate.
M1N “72%”
M2N “86%”
M3N “92%” (default)
M4N “100%”
Setting
Recording paper
size
Original document
size
“100%” A4 Letter
“92%” (default) A4 A4
“86%” A4 A4
“72%” A4 Legal
Note:
R The actual printing percentage may vary slightly depending on the type of
recording paper, or other usage environment of the sending/receiving
machines.
R The information of the sending party is printed on the top of each page.
Therefore, even if the original document is the same size as the recording
paper, the document will be divided into 2 sheets when printed at “100%”.
Select “92%” to print on 1 sheet.
Changing the LCD display
contrast
*1
MBNM3NM9N
M1N “NORMAL” (default)
M2N “DARKER”
Changing the fax activation
code
MBNM4NM1N
If you wish to use an extension telephone (page 30) to receive faxes, activate
this feature and program the activation code.
M0N “OFF”
M1N “ON” (default)
1. MMENUN A MBNM4NM1N
2. Press M1N to select “ON”. A MSETN
3. Enter your code from 2 to 4 digits, using 0-9, MGN and MBN.
R The default code is “H#9”.
4. MSETN A MMENUN
Setting the memory reception
alert
MBNM4NM4N
To alert you with a beeping sound when a received fax document is stored into
memory due to some existing problem.
M0N “OFF”: Deactivates this feature.
M1N “ON” (default): You will hear a beeping sound.
Note:
R The slow beeps will continue until you clear the printing problem and make
sure the unit is supplied with enough paper to print the stored document.
Setting friendly reception
MBNM4NM6N
To receive a fax automatically when you answer a call and hear a fax calling
tone (slow beep).
M0N “OFF”: You have to press MFAX STARTN for fax reception.
M1N “ON” (default): You do not have to press MFAX STARTN for fax reception.
42
7. Programmable Features