Operating Instructions

Problem Cause & Solution
I have changed the cordless
handset display language to a
language I cannot read.
R Change the cordless handset display language (page 46).
While programming, the
cordless handset starts to
ring.
R A call is being received. Answer the call and start again after hanging up.
is flashing. R The cordless handset is not registered to the base unit. Register it
(page 47).
R The cordless handset is too far from the base unit. Move closer.
R The power cord is not connected. Check the connections.
R You are using the cordless handset or base unit in an area with high
electrical interference. Re-position the base unit and use the cordless
handset away from sources of interference.
The cordless handset does
not ring.
R The ringer volume is turned OFF. Adjust it (page 19).
Static, sound cuts in/out,
fades. Interference from other
electrical units.
R Place the cordless handset and the base unit away from other electrical
appliances.
R Move closer to the base unit.
Noise is heard, sound cuts in
and out.
R You are using the cordless handset or base unit in an area with high
electrical interference. Re-position the base unit and use the cordless
handset away from sources of interference.
R Move closer to the base unit.
R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL
filter between the base unit and the telephone line jack. Contact your DSL/
ADSL provider for details.
The cordless handset beeps
and/or flashes.
R Battery charge is low. Fully charge the batteries (page 18).
I fully charged the batteries,
but still flashes.
R Clean the charge contacts and charge again (page 18).
R It is time to replace the batteries (page 15).
I fully charged the batteries,
but the operating time seems
to be shorter.
R Clean the battery ends ( , ) and the charge contacts with a dry cloth and
charge again.
I cannot make calls with the
cordless handset.
R The cordless handset is too far from the base unit. Move closer and try
again.
R Another unit is in use. Wait and try again later.
R The key lock feature is turned ON. Turn it OFF (page 21).
The name stored in the
phonebook is not fully
displayed while an outside
call is being received.
R Edit the phonebook item name to fit in 1 line of text (page 22).
I cannot register a cordless
handset to a base unit.
R The maximum number of cordless handsets are already registered to the
base unit. Cancel unused cordless handset registrations from the base unit
(page 47).
R You entered the wrong PIN. If you forget your PIN, consult your nearest
Panasonic service centre.
R Place the cordless handset and the base unit away from other electrical
appliances.
57
10. Help