Operating Instructions

2. Preparation
17
2.4 Adjusting volume
Ringer volume
While the unit is idle, press {A} or {B}.
L If any documents are in the document entrance, you
cannot adjust the volume. Confirm that there are no
documents in the entrance.
To turn the ringer OFF
1. Press {B} repeatedly to display “RINGER OFF=
OK?”.
2. Press {SET}.
L When a call is received, the unit will not ring and
will display “INCOMING CALL”.
L To turn the ringer back ON, press {A}.
Ringer type
L You can select one of three ringer types (feature #17
on page 40).
Monitor volume
While using the monitor, press {A} or {B}.
Initial Programming
2.5 Date and time
You must set the date and time.
1 Press {MENU}.
SYSTEM SETUP
PRESS [()]
2 Press {#}, then {0}{1}.
SET DATE & TIME
PRESS SET
3 Press {SET}.
L The cursor (|) will appear on the display.
D:|01/M:01/Y:06
TIME: 00:00
4 Enter the current date/month/year by selecting 2
digits for each.
Example: 10 August, 2006
Press {1}{0} {0}{8} {0}{6}.
D:10/M:08/Y:06
TIME: |00:00
5 Enter the current hour/minute by selecting 2 digits for
each. Press {*} repeatedly to select “AM” or “PM”,
or 24-hour time entry.
Example: 3:15PM (12 hour clock entry)
1. Press {0}{3} {1}{5}.
D:|10/M:08/Y:06
TIME: 03:15
2. Press {*} repeatedly to display “PM”.
D:|10/M:08/Y:06
TIME: 03:15PM
6 Press {SET}.
SETUP ITEM [ ]
7 Press {MENU} to exit.
{A}{B}{SET}
{
<}{>}
{MENU}
{SET}
FL403FX-PFQX2655ZA-en.book Page 17 Friday, July 7, 2006 6:28 PM