Operating Instructions

6. Programmable Features
43
Setting the auto
disconnection
{#}{4}{9}
To answer a call with an extension telephone in TEL/FAX mode (page 34),
activate this feature and program the code.
{1} “ON” (default)
{2} “OFF”
1. Press {MENU}.
2. Press {#}, then {4}{9}.
3. Press {1} to select “ON”.
4. Press {SET}.
5. Enter your code from 2 to 4 digits, using 0–9 and {*}.
L The default code is “@0”.
6. Press {SET}.
7. Press {MENU}.
Setting the scan contrast
{#}{5}{8}
To send or copy a document with faint or dark writing, set this feature
before transmission or copying.
{1} “NORMAL” (default): Used for normal writing.
{2} “LIGHT”: Used for dark writing.
{3} “DARKER”: Used for faint writing.
Note:
L This feature is not available for photo and mixed resolution.
Setting the Error
Correction Mode (ECM)
{#}{6}{8}
This feature is available when the sending/receiving fax machines are
ECM compatible.
{1} “ON” (default): If there is an error during fax transmission / reception,
the fax machine will support the communication.
{2} “OFF”: Deactivates this feature.
Setting recall time
{#}{7}{2}
The recall time depends on your telephone exchange or host PBX.
{0} “80msec”
{1} “90msec”
{2} “100msec”
{3} “110msec”
{4} “160msec”
{5} “200msec”
{6} “250msec”
{7} “300msec”
{8} “400msec”
{9} “600msec”
{*} “700msec” (default)
{#} “900msec”
Note:
L If the fax machine is connected via a PBX, PBX functions (transferring
a call, etc.) might not work correctly. Consult your PBX supplier for the
correct setting.
Changing the receiving
mode in the manual answer
setting
{#}{7}{3}
{1} “TEL” (default): Telephone mode (page 33)
{2} “TEL/FAX”: Telephone/Fax mode (page 34)
Feature/Code Selection
FL403FX-PFQX2655ZA-en.book Page 43 Friday, July 7, 2006 6:28 PM